Page 1 of 1
| Kirton Lane Crossing not raising in auto 19/11/2023 at 22:26 #154227 | |
bugsy
1766 posts |
This may be expected behaviour but I'm reporting it anyway. Kirton Lane crossing hasn't risen even though it's in auto and the track is showing as unoccupied. 🤔  Post has attachments. Log in to view them. Everything that you make will be useful - providing it's made of chocolate. Log in to reply |
| Kirton Lane Crossing not raising in auto 19/11/2023 at 22:46 #154229 | |
Hap
1039 posts 
|
I think it's correct because of your TCF and the lack of a normal clearing sequence of the route. I have asked the question to the Dev. May be a day or so for a solid reply. I'll hold off putting it on Mantis until there's a bit more of a clear understanding.
How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
| Kirton Lane Crossing not raising in auto 19/11/2023 at 22:59 #154230 | |
TUT
532 posts |
You must not raise the barriers unless: •any approaching train has passed clear of the crossing •the protecting signals are at danger or the routes are closed •no route has been set over the crossing. You must place the auto-raise switch (if provided) in the 'manual' position before you press the crossing-clear button if any of the following applies. •You need to clear a signal or issue an MA for a second train on the same or another line immediately after the first train has reached the crossing. •You are to authorise a driver to pass a signal protecting the crossing at danger or authorise a driver to pass an end of authority (EoA) without an MA. •The barriers have failed in the lowered position and a train is to pass over the crossing. You must also carry out this regulation if any of the following types of movement is to pass over the crossing. •A trolley, or any vehicle that cannot be relied upon to operate track circuits. •A shunting movement. •An unsignalled movement, or any movement for which the auto-raise facility does not apply. Log in to reply |
| Kirton Lane Crossing not raising in auto 19/11/2023 at 23:32 #154231 | |
postal
5264 posts |
bugsy in post 154227 said:This may be expected behaviour but I'm reporting it anyway.Your screen grab shows an occupied TC on the Down Line at Kirton Lane junction. This is within the section from the last signal protecting the crossing (D629) so the logic governing the operation of the LC must assume that a train is approaching. That the TC over the crossing is not occupied is a bit of a red herring. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 19/11/2023 at 23:33 by postal Reason: None given Log in to reply |
| Kirton Lane Crossing not raising in auto 19/11/2023 at 23:47 #154232 | |
|
Hap
1039 posts
|
Hap in post 154229 said:I think it's correct because of your TCF and the lack of a normal clearing sequence of the route. I have asked the question to the Dev. May be a day or so for a solid reply. I'll hold off putting it on Mantis until there's a bit more of a clear understanding.AFTER speaking to the dev, this is protypical behaviour. Your TCf affects the operation of the crossing. How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
| Kirton Lane Crossing not raising in auto 20/11/2023 at 16:15 #154249 | |
|
bugsy
1766 posts |
Hap in post 154232 said:Hap in post 154229 said:Had a feeling that was the case.I think it's correct because of your TCF and the lack of a normal clearing sequence of the route. I have asked the question to the Dev. May be a day or so for a solid reply. I'll hold off putting it on Mantis until there's a bit more of a clear understanding.AFTER speaking to the dev, this is protypical behaviour. Your TCf affects the operation of the crossing. Thanks Everything that you make will be useful - providing it's made of chocolate. Log in to reply |
| Kirton Lane Crossing not raising in auto 20/11/2023 at 16:16 #154250 | |
|
bugsy
1766 posts |
Just like to thank everybody for their informative replies. L do like explanations like these 
Everything that you make will be useful - providing it's made of chocolate. Log in to reply The following user said thank you: postal |
| Kirton Lane Crossing not raising in auto 20/11/2023 at 17:08 #154255 | |
|
postal
5264 posts |
postal in post 154231 said:bugsy in post 154227 said:And that of course is all total rubbish as I was looking at Ashfield Road LC not Kirton Lane. Sorry for the bum steer.This may be expected behaviour but I'm reporting it anyway.Your screen grab shows an occupied TC on the Down Line at Kirton Lane junction. This is within the section from the last signal protecting the crossing (D629) so the logic governing the operation of the LC must assume that a train is approaching. That the TC over the crossing is not occupied is a bit of a red herring. However, your screen grab shows the crossing as in the RAI position so what information have you used to determine that the crossing hasn't risen? “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 20/11/2023 at 17:12 by postal Reason: None given Log in to reply |
| Kirton Lane Crossing not raising in auto 20/11/2023 at 19:41 #154270 | |
|
bugsy
1766 posts |
postal in post 154255 said:postal in post 154231 said:You have made a good point.bugsy in post 154227 said:And that of course is all total rubbish as I was looking at Ashfield Road LC not Kirton Lane. Sorry for the bum steer.This may be expected behaviour but I'm reporting it anyway.Your screen grab shows an occupied TC on the Down Line at Kirton Lane junction. This is within the section from the last signal protecting the crossing (D629) so the logic governing the operation of the LC must assume that a train is approaching. That the TC over the crossing is not occupied is a bit of a red herring. I'll have to go back to an earlier save to see what's happened. Everything that you make will be useful - providing it's made of chocolate. Log in to reply |
| Kirton Lane Crossing not raising in auto 20/11/2023 at 20:00 #154277 | |
|
bugsy
1766 posts |
bugsy in post 154270 said:postal in post 154255 said:The news isn't good. In the earlier save that I tried (05:40) the problem didn't replicate so I'm now at a loss as to why it appeared to be a problem in the first place.postal in post 154231 said:You have made a good point.bugsy in post 154227 said:And that of course is all total rubbish as I was looking at Ashfield Road LC not Kirton Lane. Sorry for the bum steer.This may be expected behaviour but I'm reporting it anyway.Your screen grab shows an occupied TC on the Down Line at Kirton Lane junction. This is within the section from the last signal protecting the crossing (D629) so the logic governing the operation of the LC must assume that a train is approaching. That the TC over the crossing is not occupied is a bit of a red herring. Is it possible that I might have 'talked' a train over the crossing and track circuit and that the crossing was then reset, if you see what I mean. If not, then I don't know what happened. Sorry if I've wasted peoples time. 🤷♂️ Everything that you make will be useful - providing it's made of chocolate. Log in to reply |