Page 1 of 1
Position light signal symbol 15/11/2017 at 01:14 #102904 | |
TUT
![]() 514 posts |
Apologies if this has been asked before, but I've always wondered about why the symbol for a position light signal used on IECC workstations (which is obviously the symbol that SimSig's is modelled on) is, as far as I can make out, mirrored. I mean, the white lights in a position light signal are top centre-left and bottom right, with the slope from left to right. Why does the shunt signal symbol slope the other way? To me it's always seemed notably backwards.
Log in to reply |
Position light signal symbol 15/11/2017 at 02:55 #102906 | |
GeoffM
![]() 6344 posts |
IECC/SimSig use a quarter circle. If you look at http://www.fourbythree.co.uk/library/large/sig/SIGNAL-7.JPG (old style) and imagine the white light is the axle, and the red light marks the 9 o'clock position, then drawing an arc from the red clockwise around the white pivot light, at the 45 degree angle (10:30?) you get to the second white light. Continue the arc to 12 o'clock and you have your quarter circle. Does that make sense?
SimSig Boss Log in to reply |
Position light signal symbol 15/11/2017 at 03:22 #102908 | |
TUT
![]() 514 posts |
GeoffM in post 102906 said:IECC/SimSig use a quarter circle. If you look at http://www.fourbythree.co.uk/library/large/sig/SIGNAL-7.JPG (old style) and imagine the white light is the axle, and the red light marks the 9 o'clock position, then drawing an arc from the red clockwise around the white pivot light, at the 45 degree angle (10:30?) you get to the second white light. Continue the arc to 12 o'clock and you have your quarter circle. Does that make sense?Yes it does make sense, thanks a lot :) To me, it still looks wrong ![]() ![]() Log in to reply |
Position light signal symbol 15/11/2017 at 03:43 #102909 | |
GeoffM
![]() 6344 posts |
TUT in post 102908 said:To me, it still looks wrongYou're not the first to say that, and you won't be the last! SimSig Boss Log in to reply |