Page 2 of 5
repeat of ACOA bug 27/08/2016 at 21:25 #84334 | |
clive
![]() 2766 posts |
" said:had a fright train doing a crew change in Newcastle i pulled the signal because i had a anouther fright going though and he was not booked to stop.Scary. (Sorry, I couldn't resist.) Last edited: 27/08/2016 at 21:25 by clive Log in to reply |
repeat of ACOA bug 27/08/2016 at 21:55 #84337 | |
tjfrancis
![]() 358 posts |
the crew was not there the call came in at 01:15 dep time 01:43
I am dyslexic so please consider this when reading my posts Log in to reply |
repeat of ACOA bug 27/08/2016 at 22:23 #84338 | |
Sacro
![]() 1171 posts |
" said:the crew was not there the call came in at 01:15 dep time 01:43Someone is always there, most places you aren't allowed to leave a freight train unattended. It would still count as an ACOA even if he's not booked to leave. Log in to reply |
repeat of ACOA bug 27/08/2016 at 22:29 #84339 | |
tjfrancis
![]() 358 posts |
But it more than 10 most mints so why did it call up
I am dyslexic so please consider this when reading my posts Log in to reply |
repeat of ACOA bug 27/08/2016 at 22:57 #84341 | |
Sacro
![]() 1171 posts |
" said:But it more than 10 most mints so why did it call up" said: ... i pulled the signal because i had a anouther fright going though ...:whistle: Log in to reply |
repeat of ACOA bug 27/08/2016 at 22:57 #84342 | |
sloppyjag
![]() 480 posts |
Track section TYDM (UM south of Low Fell Jn) seems to have speed limit of 15 mph. Can't see this mentioned elsewhere.
Planotransitophobic! Log in to reply |
repeat of ACOA bug 27/08/2016 at 22:59 #84343 | |
headshot119
![]() 4869 posts |
" said:Track section TYDM (UM south of Low Fell Jn) seems to have speed limit of 15 mph. Can't see this mentioned elsewhere.That's definitely been logged on the issue tracker, but I don't think it's been mentioned on the forum before. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: sloppyjag |
repeat of ACOA bug 28/08/2016 at 05:43 #84347 | |
GeoffM
![]() 6344 posts |
" said:Yes, the expected departure time is the relevant one, not the scheduled time." said: the crew was not there the call came in at 01:15 dep time 01:43Again, expected time or scheduled time? SimSig Boss Log in to reply The following user said thank you: tjfrancis |
repeat of ACOA bug 28/08/2016 at 05:44 #84348 | |
GeoffM
![]() 6344 posts |
" said:Track section TYDM (UM south of Low Fell Jn) seems to have speed limit of 15 mph. Can't see this mentioned elsewhere.Thanks, it's already been fixed, will be in the update on Monday or Tuesday. Somehow the leading (or middle) digit 1 fell off the sign. SimSig Boss Last edited: 28/08/2016 at 05:45 by GeoffM Log in to reply |
Tyneside Bugs 28/08/2016 at 05:47 #84349 | |
GeoffM
![]() 6344 posts |
" said:I've got 6E99 in Newcastle at the moment for a crew change now I'm confused...Thank you too. Regarding the platform, 7 and 8 (and 5 and 6) are considered interchangeable for the purposes of being at the "correct" platform so I wouldn't worry about it. SimSig Boss Log in to reply |
Tyneside Bugs 28/08/2016 at 05:50 #84350 | |
Nutter
![]() 83 posts |
Hi There appears to be a 15mph speed limit on track circuit TYDM on the approach to signal 192 at Low fell junction Many thanks Mark Log in to reply |
repeat of ACOA bug 28/08/2016 at 06:51 #84351 | |
tjfrancis
![]() 358 posts |
Both on expected time or scheduled time
I am dyslexic so please consider this when reading my posts Log in to reply |
Tyneside Bugs 28/08/2016 at 07:44 #84353 | |
thereinaminute
![]() 17 posts |
When chained to York, up trains transferring from Tyneside don't appear to pick up their Current/Next location - trains due to stop at Northallerton are whizzing through non-stop as the York sim thinks the train is still at "Up Main (Darlington)". If the train gets as far as York it sits at a red signal and then calls in to say it's waiting. Down trains transferring from York to Tyneside are fine. Not sure whether this is a send (Tyneside) or receive (York) problem or a combination of both, so have reported it here. I've got both sims open on the same PC with server enabled, Tyneside using the preset primary port and York using the preset secondary port. I've worked around this by manually updating the Current/Next location via Edit Timetable. On one occasion I was late editing a TPX due to stop at Northallerton and the edit was accepted on approach to Northallerton - the train managed to go from 100mph to 88mph within five seconds and then dropped to 0mph in less than a second! Seems the brakes are decent on 185's but I wouldn't have wanted to be on board.... ![]() Log in to reply |
repeat of ACOA bug 28/08/2016 at 09:34 #84354 | |
Steamer
![]() 3958 posts |
" said:" said:Sacro- in SimSig, trains shouldn't ring in if given an ACOA more than 10 minutes before departure time. There were various discussions regarding ringing drivers and asking to replace signals etc., and the above was decided on as a compromise.But it more than 10 most mints so why did it call up" said:... i pulled the signal because i had a anouther fright going though ...:whistle: " said: HiSee the posts earlier on this page ![]() "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following users said thank you: tjfrancis, Nutter |
repeat of ACOA bug 28/08/2016 at 09:42 #84355 | |
Gwasanaethau
![]() 509 posts |
" said:…Thanks, it's already been fixed, will be in the update on Monday or Tuesday. Somehow the leading (or middle) digit 1 fell off the sign. Graffiti vandals at it again? :lol: Log in to reply |
Tyneside Bugs 28/08/2016 at 09:43 #84356 | |
casey jones
![]() 72 posts |
ARS wrong routing at Sunderland from Middlesbrough into platforms 1&2 instead of 4.Tyne dock branch coming on to the main iam sure thers more than 1 signal mick Log in to reply |
Tyneside Bugs 28/08/2016 at 11:24 #84357 | |
Steamer
![]() 3958 posts |
" said:When chained to York, up trains transferring from Tyneside don't appear to pick up their Current/Next location - trains due to stop at Northallerton are whizzing through non-stop as the York sim thinks the train is still at "Up Main (Darlington)". If the train gets as far as York it sits at a red signal and then calls in to say it's waiting. Down trains transferring from York to Tyneside are fine.Tested and confirmed, raised as Mantis 15655 on the bug tracker. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
Tyneside Bugs 28/08/2016 at 13:17 #84360 | |
MarkC
![]() 1099 posts |
" said:When chained to York, up trains transferring from Tyneside don't appear to pick up their Current/Next location - trains due to stop at Northallerton are whizzing through non-stop as the York sim thinks the train is still at "Up Main (Darlington)". If the train gets as far as York it sits at a red signal and then calls in to say it's waiting. Down trains transferring from York to Tyneside are fine.could this be related to the issue I reported At post No 5 and post No 7 Log in to reply |
Tyneside Bugs 28/08/2016 at 13:23 #84361 | |
headshot119
![]() 4869 posts |
" said:" said:No as it's a completely different issue.When chained to York, up trains transferring from Tyneside don't appear to pick up their Current/Next location - trains due to stop at Northallerton are whizzing through non-stop as the York sim thinks the train is still at "Up Main (Darlington)". If the train gets as far as York it sits at a red signal and then calls in to say it's waiting. Down trains transferring from York to Tyneside are fine.could this be related to the issue I reported At post No 5 and post No 7 "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Tyneside Bugs 28/08/2016 at 13:47 #84362 | |
Sacro
![]() 1171 posts |
" said:" said:Those as far as we are aware aren't issues, that's just how it appears in real life (unless someone comes and tells Geoff otherwise)When chained to York, up trains transferring from Tyneside don't appear to pick up their Current/Next location - trains due to stop at Northallerton are whizzing through non-stop as the York sim thinks the train is still at "Up Main (Darlington)". If the train gets as far as York it sits at a red signal and then calls in to say it's waiting. Down trains transferring from York to Tyneside are fine.could this be related to the issue I reported At post No 5 and post No 7 As for that bug, looks like York isn't removing enough things from the list of locations the train has already passed when chained, should be an easy one to fix. Last edited: 28/08/2016 at 13:49 by Sacro Log in to reply |
Tyneside Bugs 28/08/2016 at 13:55 #84363 | |
sloppyjag
![]() 480 posts |
When requesting slot for Bedlington branch, resultant message states "Norton slot has been given." Confused the Bejeezus out of me first time ARS set the route trying to figure out what was trying to go down the Norton branch and why it needed a slot. :woohoo:
Planotransitophobic! Log in to reply |
Tyneside Bugs 28/08/2016 at 13:57 #84364 | |
headshot119
![]() 4869 posts |
" said:When requesting slot for Bedlington branch, resultant message states "Norton slot has been given." Confused the Bejeezus out of me first time ARS set the route trying to figure out what was trying to go down the Norton branch and why it needed a slot. :woohoo:Already Mantis 15628 (Though I appreciate it hasn't yet been mentioned in this thread) "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Tyneside Bugs 28/08/2016 at 15:07 #84365 | |
MarkC
![]() 1099 posts |
Are the platform lenghts specified in wiki for Darlington correct, I have just been doing some testing and I created a train length of 200m and routed it in to platform 1 at Darlington, but it does not appear to fit even though wiki says P1 is around 350m (depending on direction)![]() Post has attachments. Log in to view them. Log in to reply |
Tyneside Bugs 28/08/2016 at 16:27 #84367 | |
Steamer
![]() 3958 posts |
I agree, timetable rules and Google suggest that platform should be much longer than 188m (the current length of the two TCs). Mantis 15667 applies.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
Tyneside Bugs 28/08/2016 at 16:45 #84368 | |
postal
![]() 5216 posts |
" said:I agree, timetable rules and Google suggest that platform should be much longer than 188m (the current length of the two TCs). Mantis 15667 applies.2016 Rules of the Plan gives: Darlington P1 354m. Up direction Darlington P1 347m. Down direction to T887 signal Darlington P2 181m. Darlington P3 200m. Darlington P4 458m. Both directions Darlington P4 238m. Up direction to T888 signal Darlington P4a 134m. Down direction to T895 signal Darlington P4b 251m. Down direction clear of 1080B points “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |