Upcoming Games

(UTC times)


Full list
Add a game

Upcoming Events

No events to display

Bristol Modern Fictional

You are here: Home > Forum > Simulations > Timetables > Bristol > Bristol Modern Fictional

Page 1 of 1

Bristol Modern Fictional 12/10/2009 at 16:33 #24
postal
Avatar
5264 posts
Online
Originally submitted by Hotwellian

This is based on Oldman's Modern TT.

The extra elements are a complete revision of the Severn Beach line service, follwing the summer 2008 timetable, Mon-Fri with a much increased frequency of service and a new fictional (at the moment) hourly service to Portishead. The Portishead service is currently being actively campaigned for. If actually implemented there would have to be signalling and track upgrades bringing them up to higher standard than that shown in the current simulation, also suggested passing loops at Pill and the old Clifton Bridge station - so this fictional service has to run at freightline speeds in SimSig. I have managed to run it through twice - you need to be very careful to manage freight on the Portbury line, but there is space for one per hour.

Also check out the Bristol notes on the WIKI.

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply
Bristol Modern Fictional 12/10/2009 at 16:33 #3500
postal
Avatar
5264 posts
Online
Originally submitted by Hotwellian

This is based on Oldman's Modern TT.

The extra elements are a complete revision of the Severn Beach line service, follwing the summer 2008 timetable, Mon-Fri with a much increased frequency of service and a new fictional (at the moment) hourly service to Portishead. The Portishead service is currently being actively campaigned for. If actually implemented there would have to be signalling and track upgrades bringing them up to higher standard than that shown in the current simulation, also suggested passing loops at Pill and the old Clifton Bridge station - so this fictional service has to run at freightline speeds in SimSig. I have managed to run it through twice - you need to be very careful to manage freight on the Portbury line, but there is space for one per hour.

Also check out the Bristol notes on the WIKI.

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply
Bristol Modern Fictional 13/10/2009 at 15:02 #3610
postal
Avatar
5264 posts
Online
Comments extracted from old Forum:

Etuk
Area signalling manager
Username: Etuk

Post Number: 130
Registered: 8-2004

Posted on Thursday, 04 September, 2008 - 04:11 pm:

2k02 and 2k51 both scheduled for the same platform at Avonmouth, surely 2k02 needs to be extended to seven beach instead otherwise line would be blocked

...oOo...


Etuk
Area signalling manager
Username: Etuk

Post Number: 131
Registered: 8-2004

Posted on Thursday, 04 September, 2008 - 04:44 pm:

I have now amended the timetable and made 2k02 continue to st andrews road and then 2k52 (its next service) to start from st andrews road.

...oOo...


Hotwellian
Signaller
Username: Hotwellian

Post Number: 46
Registered: 6-2008

Posted on Thursday, 04 September, 2008 - 08:54 pm:

Hi Etuk,

Thanks for this. I missed that, but discovered it a few days ago. I guess that that might be what happens in real life. The source TT on the First GW site does not indicate that 2K02 runs to Severn Beach, but there is in fact time for it to do so.

I have altered that - and a few other things in v1.1 which I am about to post

(Message edited by hotwellian on September 04, 2008)

...oOo...


Thesignalbox
Area signalling manager
Username: Thesignalbox

Post Number: 156
Registered: 12-2004

Posted on Thursday, 04 September, 2008 - 09:37 pm:

why has the 1C60 got given 30 seconds to bet from bathampton to Bath Spa

Bathampton 00/01
Bath Spa 00:01 H 00:01 H

i know its a 180 but 30 secinds for 2 miles aint do-able :P


Cheers,

James

...oOo...


Hotwellian
Supervisor
Username: Hotwellian

Post Number: 51
Registered: 6-2008

Posted on Thursday, 04 September, 2008 - 11:25 pm:

Good question. I copied that from Oldman's Modern TT. I will adjust that in the next update, which may take some time as I plan to include 2008 summer workings from the actual published TTs.

Of course it might be possible in a parallel universe :-)

<edit>
Oh look - I've got promotion! Do I get any more money?

(Message edited by hotwellian on September 04, 2008)

...oOo...


Etuk
Area signalling manager
Username: Etuk

Post Number: 132
Registered: 8-2004

Posted on Friday, 05 September, 2008 - 02:47 pm:

5E27 Barton to Bristol plat 3 appears 5 minutes too early as 2B54 is on plat 4 and departs at 0630 and needs to travel through plat 3 to go where it going, if you route 5E27 into plat 3 you will block 2B54.

...oOo...


Hotwellian
Supervisor
Username: Hotwellian

Post Number: 52
Registered: 6-2008

Posted on Friday, 05 September, 2008 - 04:26 pm:

Hi, you can leave 5E27 waiting in Barton Hill. It is timetabled to arrive at Platform 3 at 06:33, 2B54 departs at 06:30 and 1E27, which is formed from 5E27, departs at 06:58 so there is plenty of time.

...oOo...


Jsun
Supervisor
Username: Jsun

Post Number: 95
Registered: 8-2007

Posted on Saturday, 06 September, 2008 - 01:40 am:

1C60 is supposed to simulate a late running train that stables for the night, if you stick around for the midnight shift you will see the train run on time.

...oOo...


Canaderyn
Crossing box keeper
Username: Canaderyn

Post Number: 17
Registered: 11-2004

Posted on Sunday, 07 September, 2008 - 03:21 am:

5F25 ex SPM TMD A @ 0430 and 5L22 ex SPM TMD A @ 0545 do not enter. Have run it twice on Hotwellian TT 1.0 and 1.1. How do I fix these.

...oOo...


Tux
Area signalling manager
Username: Tux

Post Number: 129
Registered: 8-2007

Posted on Sunday, 07 September, 2008 - 10:09 am:

Without looking at the TT myself, I would assume that either they have a non-100% probably of running, or that their entry point isn't defined correctly.

...oOo...


Etuk
Area signalling manager
Username: Etuk

Post Number: 133
Registered: 8-2004

Posted on Sunday, 07 September, 2008 - 12:27 pm:

they are only meant to run 50% of the time, therefore, they won't always appear.

...oOo...


Tangara
Area signalling manager
Username: Tangara

Post Number: 172
Registered: 1-2005

Posted on Sunday, 07 September, 2008 - 12:32 pm:

Remove tick in Special Timing Pattern box. They should run then.
The 50% box is NOT ticked so train will run 100% of time.

BarryM

...oOo...


Hotwellian
Supervisor
Username: Hotwellian

Post Number: 56
Registered: 6-2008

Posted on Monday, 08 September, 2008 - 01:46 am:

Indeed yes, remove the tick in the special timing box - I'm not sure why that was left in.

...oOo...


Etuk
Area signalling manager
Username: Etuk

Post Number: 134
Registered: 8-2004

Posted on Monday, 08 September, 2008 - 05:43 pm:

5o86 due to arrive plat 5 BTM at 0820, however 1F05 which is in plat 5 does not depart till 0822.

...oOo...


Hotwellian
Supervisor
Username: Hotwellian

Post Number: 58
Registered: 6-2008

Posted on Monday, 08 September, 2008 - 07:04 pm:

Indeed yes, as has been pointed out elsewhere by Kurtds

<quote>

The timetable has not bee adjusted to be 'perfect', it incorporates errors that existed in the original working timetables.

On the day, it is up the signaller to reroute as required to resolve conflicts, bearing in mind they need to inform the relief driver. (Or at least pretend they do)
</quote>

...oOo...


Thesignalbox
Area signalling manager
Username: Thesignalbox

Post Number: 161
Registered: 12-2004

Posted on Friday, 12 September, 2008 - 01:18 pm:

I did find the portbuty metros are always late at Ashton holding up freight due to impossible timings.

I'm finding timetabling my own Severn Beach services are hard trying to get passing times right at Clifton/Avonmoith and not colide with trains at Stapleton Road!

...oOo...


Hotwellian
Supervisor
Username: Hotwellian

Post Number: 64
Registered: 6-2008

Posted on Friday, 12 September, 2008 - 05:24 pm:


quote:

I did find the portbuty metros are always late at Ashton holding up freight due to impossible timings.

I'm finding timetabling my own Severn Beach services are hard trying to get passing times right at Clifton/Avonmoith and not colide with trains at Stapleton Road!

You need to hold up freights either at TN down through or at Ashton Junction until the even number 2Pxx train has cleared Ashton Junction crossing more or less on the hour. Don't leave the crossing barriers down, start the lower barriers sequence again otherwise you will lose points for prolonged delay to road users. The only viable path for freights during metro running hours is at about xx:02 whether from Portbury or Ashton

I have removed a few freights in v2.1 to make life easier and it works as long as you authorise trains to proceed to get a token as soon as possible, circa xx:43/44

The Severn Beach timetable I have used in the Modern Bristol is the actual Summer 2008 one and that works fairly well.

...oOo...


Alan_s
Tea maker
Username: Alan_s

Post Number: 1
Registered: 5-2009

Posted on Monday, 25 May, 2009 - 05:19 pm:

Hi, I'm probably doing something wrong (especially as no-one else has mentioned this!), but I'll proceed...

Using version 1.1 (I see mention of a V2 above but can't find a download) in the modern era (again I assume from the description that this is the correct mode).

1B94 comes from bath, round Dr Days into BPW. It says it should go into P1, which doesn't exist in the modern era. So I put it into P3 and get points deducted for "wrong platform". (I even tried editing the train details before it appeared, to tell it to go to P3, but still got told off!)

Only a minor thing, I'm enjoying running this sim (now I'm used to the scrolly interface) - I do hope we get trains on the Portishead line for real one day ...

Alan

...oOo...


Thesignalbox
Area signalling manager
Username: Thesignalbox

Post Number: 211
Registered: 12-2004

Posted on Tuesday, 26 May, 2009 - 04:35 pm:

You will get knocked off for any correct platform at BPW, just a current bug that should be fixed, I just ignore it anyway doesn't really matter.

I too hope the portishead services get the go ahead, though would take alot of work!

...oOo...


Alan_s
Tea maker
Username: Alan_s

Post Number: 2
Registered: 5-2009

Posted on Tuesday, 26 May, 2009 - 06:41 pm: Edit PostDelete PostPrint Post
Thanks for your reply - I won't worry then... (It didn't look good, as the second passenger service of the day, 50% wrong platform...)

Its taking me a while to complete, have to play in real time, there's so much to keep an eye on... Very addictive though!

Alan

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply