Page 1 of 1
| Unable to connect to server 12/07/2019 at 08:29 #119390 | |
marychristmaseverybody
45 posts |
I have Windows 8.1. I have enabled TLS 1.2 AND all the others too, as per the other threads. I have restarted the pc. I have enabled SimSig loader and license manager through the Firewall. I also tried turning off Firewall completely. Then I restarted the pc again. I have also run various troubleshooters re compatibility, connections, etc. I don't know what to do next, having spent hard earned cash on Manchester Piccadilly! PLEASE HELP!
Log in to reply |
| Unable to connect to server 12/07/2019 at 10:31 #119394 | |
Peter Bennet
5402 posts |
It might be useful to know what happened to resolve here: https://www.SimSig.co.uk/Forum/ThreadView/49567 Peter I identify as half man half biscuit - crumbs! Log in to reply |
| Unable to connect to server 12/07/2019 at 17:00 #119397 | |
GeoffM
6376 posts 
|
marychristmaseverybody in post 119390 said:I have Windows 8.1. I have enabled TLS 1.2 AND all the others too, as per the other threads. I have restarted the pc. I have enabled SimSig loader and license manager through the Firewall. I also tried turning off Firewall completely. Then I restarted the pc again. I have also run various troubleshooters re compatibility, connections, etc. I don't know what to do next, having spent hard earned cash on Manchester Piccadilly! PLEASE HELP!Do you have any anti-virus or anti-malware software installed? SimSig Boss Log in to reply |
| Unable to connect to server 13/07/2019 at 08:00 #119399 | |
|
marychristmaseverybody
45 posts |
No. Just Windows Defender.
Log in to reply |
| Unable to connect to server 13/07/2019 at 08:34 #119400 | |
Stephen Fulcher
2078 posts
|
Have you tried the ideas in the thread Peter linked to above?
Log in to reply |
| Unable to connect to server 13/07/2019 at 10:46 #119403 | |
Steamer
3984 posts
|
Have you been able to use the updater in the past, or is this you first attempt?
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Unable to connect to server 15/07/2019 at 15:13 #119431 | |
|
marychristmaseverybody
45 posts |
Thanks Peter I've downloaded Wireshark and captured some interesting packets regarding attempts to connect with the license manager. Is is okay if I send details of the packets captured, as I'm not a computer whiz! Log in to reply |
| Unable to connect to server 15/07/2019 at 15:15 #119432 | |
|
marychristmaseverybody
45 posts |
Ive used the updater a few times, successfully. It's just when connecting with the License Manager server that I've come a cropper!
Log in to reply |
| Unable to connect to server 15/07/2019 at 15:21 #119433 | |
Edgemaster
332 posts |
Quote:I've downloaded Wireshark and captured some interesting packets regarding attempts to connect with the license manager. Is is okay if I send details of the packets captured, as I'm not a computer whiz! Do not post them publicly, as they may contain sensitive information (eg, passwords). Last edited: 15/07/2019 at 15:22 by Edgemaster Reason: None given Log in to reply The following user said thank you: marychristmaseverybody |
| Unable to connect to server 15/07/2019 at 17:03 #119435 | |
postal
5263 posts
|
There have been problems with the licence manager in the past (though none as you describe) due to the common.cfg file either disappearing or being corrupted. There are a number of topics on the Forum if you search for "common.cfg". These were fixed by deleting the common.cfg file (in the Public Documents/SimSig folder) then running the Licence Manager which recreates the file. May be worth a try if all else is failing. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Unable to connect to server 15/07/2019 at 18:44 #119436 | |
|
GeoffM
6376 posts
|
marychristmaseverybody in post 119390 said:I have Windows 8.1. I have enabled TLS 1.2 AND all the others too, as per the other threads. I have restarted the pc. I have enabled SimSig loader and license manager through the Firewall. I also tried turning off Firewall completely. Then I restarted the pc again. I have also run various troubleshooters re compatibility, connections, etc. I don't know what to do next, having spent hard earned cash on Manchester Piccadilly! PLEASE HELP!Can you quote the exact error message reported when you try to log in using License Manager please? Did you allow LM *inbound* or *outbound* through the firewall? It sounds like something is blocking either the request or the response but there is very little information to go on unfortunately. One other thought: run License Manager as administrator. Find it in the Start menu (left click, start typing License, should be listed), but *right* click on the entry, then select Run As Administrator, and confirm. Log in as normal. SimSig Boss Log in to reply |
| Unable to connect to server 15/07/2019 at 21:33 #119439 | |
|
clive
2789 posts |
marychristmaseverybody in post 119431 said:Thanks PeterCould you please email them to me: clive@SimSig.co.uk Log in to reply |
| Unable to connect to server 17/07/2019 at 09:06 #119450 | |
|
marychristmaseverybody
45 posts |
Thanks. I ran License Manager as Administrator. It still does not connect. A question - Is there supposed to be three dots already in the password box upon it opening? I delete these, then put in my own password. Just wondered if that was how it should open. Log in to reply |
| Unable to connect to server 17/07/2019 at 09:09 #119451 | |
|
marychristmaseverybody
45 posts |
I have checked the SimSig folder in Public Documents and there is no common.cfg in there. And I assume that it can't be created as I cannot connect to License Manager. I'll keep scrolling through old threads to see if anyone else had this problem.
Log in to reply |
| Unable to connect to server 17/07/2019 at 12:39 #119455 | |
9pN1SEAp
1180 posts |
I've had problems in other applications with Windows Defender's "Ransomware Protection" feature which by default stops any "unknown" applications from creating files in certain folders INCLUDING the Documents. Check to see if "Controlled folder access" is set, and if so try turning it off to see if that cures it.
Jamie S (JAMS) Log in to reply |
| Unable to connect to server 30/07/2019 at 11:15 #119743 | |
|
marychristmaseverybody
45 posts |
Thanks Jamie. I'll give that a go. Another thread I found suggested turning off IE Enhanced Security Config. in the Server Manager, but I can't for the life of me find that on my pc. I have Windows 8.1 Single Lang. Build 9600. I've tried all the obvious. One link I found said to check Server Manager was enabled in "Windows Features". That, too, could not be found! It's like swimming in circles! Log in to reply |
| Unable to connect to server 30/07/2019 at 11:15 #119744 | |
|
marychristmaseverybody
45 posts |
Thanks Jamie. I'll give that a go. Another thread I found suggested turning off IE Enhanced Security Config. in the Server Manager, but I can't for the life of me find that on my pc. I have Windows 8.1 Single Lang. Build 9600. I've tried all the obvious. One link I found said to check Server Manager was enabled in "Windows Features". That, too, could not be found! It's like swimming in circles! Log in to reply |
| Unable to connect to server 30/07/2019 at 11:33 #119746 | |
|
9pN1SEAp
1180 posts |
That feature was in Windows Server only AFAIK. And never made it into Windows 8 because it wasn’t good.
Jamie S (JAMS) Log in to reply |
| Unable to connect to server 30/07/2019 at 12:29 #119748 | |
|
marychristmaseverybody
45 posts |
Thanks again. I found Windows Features but not Server Manager. The latter was not in there, as you say. Unfortunately, I cannot find Controlled Folder Access. And there isn't a Tools option under Defender. All internet searches on this help with Windows 10 only, not Windows 8.1. Log in to reply |
| Unable to connect to server 30/07/2019 at 16:45 #119752 | |
|
GeoffM
6376 posts
|
marychristmaseverybody in post 119450 said:A question - Is there supposed to be three dots already in the password box upon it opening? I delete these, then put in my own password. Just wondered if that was how it should open.Sorry I missed this before. It's just text left over from coding, probably says something like "pwd" (password). It can be deleted and ignored. Can you click on the "What's my IP" link in the left bar of this website and PM me the full number - it'll be four sets of numbers like 12.34.56.234. Then try to log in using License Manager. In the PM include the time you pressed "Log In" as accurately as possible, as I'll be searching through logfiles with tens of thousands of entries per hour. SimSig Boss Log in to reply |