Page 1 of 1
Hardendale Quarry 19/12/2016 at 19:40 #91001 | |
HST125Scorton
![]() 1167 posts ![]() |
While I've waiting for new on the Carlisle Loader sim, I've been testing out my October 2016 WTT for the .exe version. at 09:34 I get call from Hardendale Quarry advising me train 6H51 0934 Hardendale to Tunstead is ready for departure at this time I have 1S39 07:16 Birmingham New Street to Glasgow Central at CE137 Down Main and 4M00 07:02 Mossend Down Yard to Clitheroe Castle Cement at CE151 Up Main. I have Auto's off ready to route 6H51 onces the 2 services pass until 6H51 enters itself on it's own accord onto the Down Main, F2 Says at Shap Hardendale Quarry Reverse CE142. 1S39/4M00 both receive aspect changes from Green to Caution Single Yellow. Just wondering if I have done anything wrong? The timetable is correct and nothing mentioned with check. With hope this won't happen on the Loader Version when released. Note this is for the .Exe Version. Aaron (AJRO) | Timetable Writer Log in to reply |
Hardendale Quarry 20/12/2016 at 12:46 #91023 | |
TomOF
![]() 452 posts |
Occasionally it was possible for the front end of a train entering from a siding to effectively enter past the exit signal - something to do with train lengths exceeding the entrance track length. Will need to be checked with the loader version to see if it's still an issue. Log in to reply The following user said thank you: HST125Scorton |
Hardendale Quarry 20/12/2016 at 19:52 #91028 | |
HST125Scorton
![]() 1167 posts ![]() |
Thank you Tom. My train entering earlier in the morning 0445 arrival is 6C54 with 22 MXA Wagons the new type wagons for Freightliner Stone workings and is 350m in length, it has to be the same train returning later as 6H51 with same set of wagons at the same length. I will have fiddle around with train making it shorter and see what happens. Aaron (AJRO) | Timetable Writer Log in to reply |
Hardendale Quarry 13/01/2018 at 15:28 #105034 | |
Albert
![]() 1315 posts |
The problem still exists and I have attached a save of 6H51. The train is stopped at Hardendale, according to F2 but blocks the lines.
Post has attachments. Log in to view them. AJP in games Last edited: 13/01/2018 at 15:29 by Albert Reason: None given Log in to reply |
Hardendale Quarry 13/01/2018 at 15:47 #105036 | |
HST125Scorton
![]() 1167 posts ![]() |
Presuming you have Carlisle v3.238.2.exe? For 6H51 before you set its road to Reverse CE142 abandon its timetable set its road then once moving re-add his timetable for Reverse CE142. The train will be ok. This will apply the same also for a later train 6V71 if its in the timetable. Aaron (AJRO) | Timetable Writer Log in to reply |
Hardendale Quarry 13/01/2018 at 18:41 #105038 | |
Albert
![]() 1315 posts |
Yes, the train is OK after that procedure. I had to reverse it however shortly after it cleared the TC otherwise it would disappear off the sim into the quarry.
AJP in games Log in to reply |