Page 1 of 1
| NX panel point switches 14/11/2020 at 14:26 #133840 | |
Steamer
3985 posts |
When looking through some NX panel photos (e.g. https://photos.signalling.org/picture?/25896/category/3297-2017_march ), I'm struggling to work out the purpose of the central indication lamp on the point switches. The N and R lamps I presume are lit when the points are detected in the respective positions, but the central lamp isn't as obvious. From the photos on the linked site, as far as I can tell they don't indicate that auto mode is selected, nor do they indicate that the point is free to move. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| NX panel point switches 14/11/2020 at 14:39 #133842 | |
headshot119
4869 posts |
I'll open with I think the Western region E10K panels work differently with how the indications work, I'll leave it to someone else to answer how they work. N lit - Detected Normal R lit - Detected Reverse C lit flashing - Points are out of correspondence. [EDIT] Actually I think flashing means the points are out of correspondence (Should be normal but are reverse for example), while lit steady is that they aren't detected in the position they currently lie in. It's been a long time since I signed Gatestown  The switch itself needs to be in the C position to allow route setting to call the points automatically to the needed position. If you move the switch to N or R you'll only be able to call routes that require those points in that position. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Last edited: 14/11/2020 at 14:42 by headshot119 Reason: None given Log in to reply The following users said thank you: Steamer, TUT |
| NX panel point switches 14/11/2020 at 15:28 #133844 | |
TUT
532 posts 
|
Minor footnote: The C will also flash when the points are moving as they are not detected in either position when moving of course. If it continues to flash you've got a bit of a problem :P Of course some particular designs of panel may function differently? Log in to reply The following users said thank you: Steamer, headshot119 |
| NX panel point switches 14/11/2020 at 15:32 #133845 | |
|
headshot119
4869 posts |
You're quite right of course. Not too far off Power Operated Points on the block shelf really, white N if they're normal, white R if they're reverse, Solid white if they're in anyway unhappy. Except the solid white doesn't come up when they're travelling between positions. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| NX panel point switches 14/11/2020 at 15:46 #133846 | |
GeoffM
6376 posts |
The C light on at least one brand of panel point switches lights up if the point is locked (eg route or flank). As you can see, there is no single standard! SimSig Boss Log in to reply The following user said thank you: Steamer |
| NX panel point switches 14/11/2020 at 16:39 #133848 | |
KymriskaDraken
963 posts |
GeoffM in post 133846 said:The C light on at least one brand of panel point switches lights up if the point is locked (eg route or flank).You can't beat the railway for non-standard standards. Kev Log in to reply |
| NX panel point switches 14/11/2020 at 16:44 #133849 | |
|
JamesN
1608 posts
|
The centre red light on on WR Panel point switches is indeed a lock light Out of correspondence is indicated by the route lights on the panel flashing alternately between Normal and Reverse Log in to reply The following user said thank you: Steamer |
| NX panel point switches 14/11/2020 at 16:56 #133850 | |
Splodge
719 posts
|
KymriskaDraken in post 133848 said:GeoffM in post 133846 said:The C light on at least one brand of panel point switches lights up if the point is locked (eg route or flank).You can't beat the railway for non-standard standards. 
There's the right way, the wrong way and the railway. Log in to reply The following users said thank you: Steamer, Tempest Malice |
| NX panel point switches 14/11/2020 at 17:15 #133851 | |
VInce
579 posts |
At Derby and Trent where I worked the centre light would flash while points were moving and would stay flashing if no detection was found, i.e. out of correspondence. Vince I walk around inside the questions of my day, I navigate the inner reaches of my disarray, I pass the altars where fools and thieves hold sway, I wait for night to come and lift this dread away : Jackson Browne - The Night Inside Me Log in to reply The following user said thank you: Steamer |
| NX panel point switches 14/11/2020 at 17:37 #133855 | |
|
Ron_J
331 posts |
Some panel fascias have a fourth light above or below the C light to indicate whether the points are free to swing or locked by a route (or flank) rather than using the centre indication for this.
Log in to reply The following user said thank you: Steamer |
| NX panel point switches 14/11/2020 at 17:52 #133857 | |
|
headshot119
4869 posts |
Ron_J in post 133855 said:Some panel fascias have a fourth light above or below the C light to indicate whether the points are free to swing or locked by a route (or flank) rather than using the centre indication for this.I'm sure I've seen one of those before Ron but I can't think where. Do you have any examples? "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| NX panel point switches 15/11/2020 at 14:13 #133883 | |
|
Ron_J
331 posts |
Perth for one, off the top of my head. Though I am sure I have also seen it elsewhere.
Log in to reply |
| NX panel point switches 15/11/2020 at 14:45 #133884 | |
|
TUT
532 posts
|
Ron_J in post 133883 said:Perth for one, off the top of my head. Though I am sure I have also seen it elsewhere.I don't believe Perth is an example: https://www.flickr.com/photos/llangollen_signalman/46060169191/ Although it would seem to be a prime example of a panel that uses the C light to indicate the points are locked. I had a look around for pictures of the older panel and that doesn't appear to have been any different: https://www.flickr.com/photos/llangollen_signalman/5830019728/ Quite an unusual installation, though, Perth. Very nice, mind Last edited: 15/11/2020 at 14:45 by TUT Reason: None given Log in to reply |