Page 1 of 1
| Wrong platform length P3 in manual 11/10/2021 at 17:02 #141832 | |
Dionysusnu
577 posts |
The manual states P3 is 294 meters. However, it seems to be less than 290 as two trains of 130 and 160 do not fit in it together.
Post has attachments. Log in to view them. Log in to reply |
| Wrong platform length P3 in manual 11/10/2021 at 17:09 #141833 | |
|
Dionysusnu
577 posts |
Obviously trains need margins and can't close up to 1cm precision, but using more than 4 metres for that seems excessive.
Last edited: 11/10/2021 at 17:10 by Dionysusnu Reason: None given Log in to reply |
| Wrong platform length P3 in manual 11/10/2021 at 17:14 #141834 | |
GeoffM
6376 posts |
If the two trains are not coupled then there will be a gap between them, as well as the normal gap at the buffers. You might be able to shunt one or both forward (but check what direction they're facing).
SimSig Boss Log in to reply |
| Wrong platform length P3 in manual 11/10/2021 at 17:20 #141835 | |
9pN1SEAp
1180 posts |
The Timetable didn't have the incoming service at "FX" position, so will have stopped short of the buffers by a couple of metres or more. So yes, as advised by Geoff you will need to move 1A35 in the Up direction. NB: Timetable also doesn't have Platform Share activity, so ACI may well not work properly. Jamie S (JAMS) Log in to reply |