Page 1 of 1
| unable to interpose TD's on Cathcart 29/05/2020 at 20:06 #127212 | |
jc92
3685 posts |
running 4.2 and it's impossible to interpose a TD at any of the signals, using either the "I" keyboard shortcut or the interpose button or by right clicking on signals. this only occurs on OCS signals so it might be related to a previous issue peter responded to regarding the panel signals display option where these signals have been drawn non standard. can anyone else recreate this before I log it on Mantis. "We don't stop camborne wednesdays" Log in to reply |
| unable to interpose TD's on Cathcart 29/05/2020 at 20:16 #127214 | |
postal
5263 posts |
jc92 in post 127212 said:running 4.2 and it's impossible to interpose a TD at any of the signals, using either the "I" keyboard shortcut or the interpose button or by right clicking on signals. this only occurs on OCS signals so it might be related to a previous issue peter responded to regarding the panel signals display option where these signals have been drawn non standard.Confirmed. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| unable to interpose TD's on Cathcart 29/05/2020 at 20:41 #127216 | |
|
jc92
3685 posts |
I've done a bit of digging and 21580 already applies and has been closed without a fix being possible.
"We don't stop camborne wednesdays" Log in to reply |
| unable to interpose TD's on Cathcart 29/05/2020 at 20:49 #127217 | |
|
postal
5263 posts |
jc92 in post 127216 said:I've done a bit of digging and 21580 already applies and has been closed without a fix being possible.Not sure that explores the whole situation as that only seems to explore the right-click on the signal option. Leaving the displayed signals to one side, is the set-up of the berths different under the OCS as compared with NX?. Following on from that, what is the underlying method that the TD Interpose button or the "I" key use to add text to a berth and how is that impacted by the display of the OCS signals? “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 29/05/2020 at 20:50 by postal Reason: None given Log in to reply |
| unable to interpose TD's on Cathcart 29/05/2020 at 22:59 #127220 | |
Chromatix
190 posts |
I've just looked at it in demo mode. In OCS mode, the signals on the diagram cannot be interacted with at all, and everything is delegated to the simulated OCS board. The TD berths are invisible if not occupied, and (as is also normal in NX mode) cannot be interacted with when invisible. However, I was able to right-click on an occupied TD berth and interpose into it. Based on this, I think the problem can be solved by making blank TD berths visible, as is already usually done for approach and last-sent berths. Log in to reply |
| unable to interpose TD's on Cathcart 11/09/2022 at 19:39 #147950 | |
|
apache668
34 posts |
Chromatix in post 127220 said:I've just looked at it in demo mode. In OCS mode, the signals on the diagram cannot be interacted with at all, and everything is delegated to the simulated OCS board. The TD berths are invisible if not occupied, and (as is also normal in NX mode) cannot be interacted with when invisible. Is there any update on this? I'm having the same issues so I'm assuming it's not been fixed? Basically... What it is driver... We uh.... Log in to reply |
| unable to interpose TD's on Cathcart 12/09/2022 at 22:41 #147978 | |
Hap
1037 posts 
|
Post 127216 here still applies
How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Last edited: 12/09/2022 at 22:42 by Hap Reason: None given Log in to reply |