Page 2 of 2
Re: Saltley Signalling Diagram 23/01/2012 at 00:42 #28027 | |
postal
![]() 5216 posts ![]() |
Karl I bet you're glad you spent all that time putting a diagram together just to stimulate this level of discussion. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 23/01/2012 at 00:45 by postal Log in to reply The following users said thank you: Noisynoel, jc92, headshot119 |
Re: Saltley Signalling Diagram 23/01/2012 at 00:47 #28028 | |
Laryk
![]() 56 posts |
Thanks for the feedback, Max. At the time I was having quite a bit of fun just messing around with all kinds of colours. It was the first time I had actually played with image editing software more advanced than MS Paint, and I was only really focusing on what looked "alright" for me. If people just want a white background with default colours then I suggest to Karl (or anyone who can make them) that instead of inverting the colours, they replace "black" with "white". (FYI, I used Paint.net and with the "Fill" tool it replaces the original colour with the chosen one). I think if we use the original orangey-colour for stations it should be made a little more dull (possibly slightly transparent) so it doesn't blend with the white background so much. Maybe even have small light grey borders around the boxes? I don't know how you would achieve that without doing it by hand, but it would certainly help with the contrast between orange and white. Oh - I was pretty sure I had used primary red for signals - It was certainly the red given to me in the "quick-access-colour-picker-with-normal-colours" panel. ![]() Regarding the image format woes, the master copy I made is unfortunately still a .jpeg, so there's not really a lot I can do about that. I'll do some more fiddling with a fresh copy tomorrow taking your suggestions onboard, but for now it is well past midnight so I'm going to get some sleep ![]() Last edited: 23/01/2012 at 00:49 by Laryk Log in to reply |
Re: Saltley Signalling Diagram 23/01/2012 at 03:29 #28032 | |
BarryM
![]() 2158 posts |
Are there diagrams produced similar to this ARTC (NSW) driver's diagram? Easy to read and pleasant on the eyes. No colours involved. [attachment=209]2-1546attachment2.pdf[/attachment] Barry Post has attachments. Log in to view them. Barry, Sydney, New South Wales, Australia Log in to reply |
Re: Saltley Signalling Diagram 23/01/2012 at 04:41 #28036 | |
maxand
![]() 1637 posts |
LaryK wrote: Quote: Oh - I was pretty sure I had used primary red for signalsActually, you are probably right and the unusual purplish tint (to my eyes) may simply be part of the "bleed" effect I mentioned above. I used to strike this in producing diagrams for Web pages - even the colours never looked right till I gave up using JPGs for this purpose. Glad to read you like using Paint.NET too. You might like to check out my post on using its Magic Wand tool here Log in to reply |
Re: Saltley Signalling Diagram 23/01/2012 at 12:11 #28050 | |
headshot119
![]() 4869 posts |
" said:KarlCan I nominate this post for "Post of the year award 2012" and offer you a pint at a meet of your choice? "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following users said thank you: Signalhunter, postal |
Re: Saltley Signalling Diagram 23/01/2012 at 12:45 #28052 | |
flymo
![]() 135 posts |
Just FYI, what I have done in the past with these is, as you say, invert the colours but then I save as a monochrome bitmap which only gives black and white. The background is white but everything else is black. It works for me but obviously everone has their own preference. A snippet of the Saltley map is shown below to illustrate.![]() Post has attachments. Log in to view them. Log in to reply |
Re: Saltley Signalling Diagram 23/01/2012 at 13:59 #28055 | |
clive
![]() 2766 posts |
" said:Are there diagrams produced similar to this ARTC (NSW) driver's diagram?You know, there's about three-quarters of the information there required to build a simulation (okay, it would have to use UK signalling rules). If track circuit information isn't available, plausible track circuits could be added. Log in to reply |
Re: Saltley Signalling Diagram 23/01/2012 at 14:43 #28056 | |
clive
![]() 2766 posts |
" said:Even though SimSig's colours are primaries (red, blue, green) and major secondaries (cyan, magenta, yellow, etc.), so could be accommodated within the narrow but economic colour range of GIF imagesGIF can in fact handle any colour, though it's limited to 256 colours in an image (it uses a colour table rather than encoding the colours of each pixel directly. The colours currently used in SimSig are the following (though not all are available in all contexts and there are a few special cases - such as lever frames - where a different value is used for a given colour): [table] [tr][td]black[/td][td]000000[/td][/tr] [tr][td]blue[/td][td]FFA000[/td][/tr] [tr][td]brown[/td][td]00458B[/td][/tr] [tr][td]cream[/td][td]A0FFFF[/td][/tr] [tr][td]crimson[/td][td]000088[/td][/tr] [tr][td]cyan[/td][td]FFFF00[/td][/tr] [tr][td]dark blue[/td][td]880000[/td][/tr] [tr][td]dark green[/td][td]00C000[/td][/tr] [tr][td]green[/td][td]00FF00[/td][/tr] [tr][td]grey[/td][td]888888[/td][/tr] [tr][td]light grey[/td][td]CCCCCC[/td][/tr] [tr][td]pink[/td][td]FFA0FF[/td][/tr] [tr][td]purple[/td][td]FF0080[/td][/tr] [tr][td]red[/td][td]0000FF[/td][/tr] [tr][td]stone[/td][td]0080FF[/td][/tr] [tr][td]white[/td][td]FFFFFF[/td][/tr] [tr][td]yellow[/td][td]00FFFF[/td][/tr] [/table] Log in to reply |
Re: Saltley Signalling Diagram 23/01/2012 at 16:52 #28061 | |
headshot119
![]() 4869 posts |
The big question is; Do I bother making one for Derby? Probably not to be honest with you. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Re: Saltley Signalling Diagram 23/01/2012 at 16:53 #28062 | |
headshot119
![]() 4869 posts |
" said:Just FYI, what I have done in the past with these is, as you say, invert the colours but then I save as a monochrome bitmap which only gives black and white. The background is white but everything else is black. It works for me but obviously everone has their own preference. A snippet of the Saltley map is shown below to illustrate.Trouble is now we are missing a load of the signal heads. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Re: Saltley Signalling Diagram 23/01/2012 at 16:56 #28063 | |
58050
![]() 2652 posts |
Why not. I think you've done a great job with Saltley. With some sims having different era's, these diagrams would become very useful. I salute your good work.
Log in to reply The following user said thank you: jc92 |
Re: Saltley Signalling Diagram 23/01/2012 at 16:59 #28064 | |
jc92
![]() 3649 posts |
i agree with 58050, forget all the comments on formatting nonsense, it doesnt matter if it looks pretty as long as it does the job wack some numbers onto an inverted image and upload it and most people will be very happy "We don't stop camborne wednesdays" Log in to reply The following user said thank you: Steamer |
Re: Saltley Signalling Diagram 23/01/2012 at 17:05 #28065 | |
58050
![]() 2652 posts |
I would also add that most of us can see from the diagram where the signal number is displayed. The fact that tghe signal head maybe missing isn't going to mean that no one knows there isn't a signal there.
Log in to reply |