Page 1 of 1
| How to get Main Line trains into Derby RTC? 02/05/2015 at 03:11 #71618 | |
maxand
1637 posts |
Anyone unfamiliar with Derby RTC should perhaps first read these two threads: Where is Derby RTC (and others needing a phone call)? Where is Derby Way & Works Siding? In the default TT (in my case, commencing from 12:00), at 05:10 I have 4Z09 at signal 433, direction UP. Its TT calls for it to travel along the DGL (same direction), then along the Derby Way & Works Siding (between signals 428 and 425, but UP, I expect), then terminate at Derby RTC (either Research or P.Way siding). My problem is that I still cannot work out what routes to set to get it there. From 433 there is no simple route to the DGL without, it seems, having to route it to CHAD CURVE then signalling it to reverse back to the DGL. Its TT does not mention reversing. Once on the DGL the logical point of entry into Derby RTC is via Research Siding; again this would require reversing all the way back, which doesn't seem right. Likewise, any trains approaching DOWN from Sheet Stores Jn would need to reverse somewhere between Derby and Derby DGL before making it to Derby RTC, unless they stop and reverse at signal 430 back to Research Siding. I cannot determine the TT writer's intent here. Would someone tell me how it's done? Not a problem for trains approaching Derby from the opposite direction, as they would proceed UP along the GL, then through Derby W&W and into the RTC. Thanks for your assistance Post has attachments. Log in to view them. Last edited: 02/05/2015 at 03:13 by maxand Log in to reply |
| How to get Main Line trains into Derby RTC? 02/05/2015 at 03:26 #71619 | |
|
John
884 posts |
4Z09 has been wrong routed towards 433. At the previous signal 379 at Nnw Jn Derby, it should have been routed to 436 on the Down Goods, then to 458 and reverse on 448 to 425 and into the Research Siding (RTC). Log in to reply The following user said thank you: maxand |
| How to get Main Line trains into Derby RTC? 02/05/2015 at 03:55 #71620 | |
|
officer dibble
409 posts |
It is a good idea for anything heading into the RTC at Derby to phone up well in advance for a slot, as there a 2 entrances to this location (as I discovered to my cost recently :doh ) 1) If the train is accepted via the "P.way Siding" then the train can be reversed in platform 1,2 or 3 at Derby, and the train be put straight into this siding by simply routing from the platform starter signal. 2) If the train is accepted via the "Research Sdg" the a train can be reversed on the DGL adjacent to Derby station and can be put into the RTC by routing 448-425 & then into the RTC accordingly. Remember if the train is to be reversed in the DGL & is coming from Stenson Junction it must go over to the Goods line @ LNW Derby Junction to facilitate this. Hope this helps. When in doubt - Contingency plan 2A. Someone didn't buy the milk - 2A. Someone sneezed at Swansea - 2A. A driver complains the cab is too cold - 2A. Unable to operate a HEx service 4 vice 8 - 2A. Points failure at Ipswich - 2A. Landslip at Pitlochry - 2A Log in to reply The following users said thank you: maxand, Kavin |
| How to get Main Line trains into Derby RTC? 02/05/2015 at 08:31 #71623 | |
|
maxand
1637 posts |
Thanks both of you for your help. Dunno how I missed the obvious! On the subject of phoning Derby RTC well in advance, I did this, got permission, then had to exit, saving my current situation before quitting. On starting another session (resuming at the time saved), I carried on as before, but when the train entered the RTC I was informed that no permission had been given - more penalty points. I should have phoned again and maybe reversed the train, waiting for a fresh permission. I can't remembering experiencing this problem before, but if permissions are not saved along with the sim then it would apply to all sims, not just Derby. Last edited: 02/05/2015 at 08:41 by maxand Log in to reply |
| How to get Main Line trains into Derby RTC? 02/05/2015 at 22:55 #71661 | |
|
Airvan00
129 posts |
I think the does (did) apply to other sims. I remember having the problem with Westbury. I got into the habit of never saving a sim while I had an outstanding permission.
Log in to reply |
| How to get Main Line trains into Derby RTC? 03/05/2015 at 03:42 #71663 | |
|
maxand
1637 posts |
In that case, the devs should fix this one. If permission is given but not saved, then when the sim resumes the train may be too close to its destination to phone again before it enters the yard or whatever.
Log in to reply |
| How to get Main Line trains into Derby RTC? 03/05/2015 at 05:43 #71664 | |
BarryM
2158 posts |
May the Lord give us strength. So what? Anybody would think that money was involved in performances.
Barry, Sydney, New South Wales, Australia Log in to reply |
| How to get Main Line trains into Derby RTC? 03/05/2015 at 06:57 #71665 | |
|
maxand
1637 posts |
If that's true, you ought to be quite rich by now. 
Last edited: 03/05/2015 at 07:00 by maxand Log in to reply |
| How to get Main Line trains into Derby RTC? 06/05/2015 at 12:57 #71788 | |
|
clive
2789 posts |
" said:In that case, the devs should fix this one.I agree. Mantis 13136 raised. Log in to reply The following user said thank you: Steamer |
| How to get Main Line trains into Derby RTC? 06/05/2015 at 23:24 #71857 | |
|
uboat
219 posts |
some pay rises are based on performances.
Log in to reply |
| How to get Main Line trains into Derby RTC? 07/05/2015 at 11:49 #71882 | |
bfcmik
100 posts |
I'm a truck driver - what is this 'pay rise' thing you are talking about? :dry:
Log in to reply |
| How to get Main Line trains into Derby RTC? 07/05/2015 at 11:50 #71883 | |
headshot119
4869 posts |
" said:I'm a truck driver - what is this 'pay rise' thing you are talking about? :dry:That once a year miracle when the National Minimum Wage goes up 10p or so! "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| How to get Main Line trains into Derby RTC? 19/05/2015 at 11:07 #72459 | |
|
gricehead
44 posts |
Piggy backing on this thread for further help, hope you don't mind. I've had 4Z09 accepted by Derby RTC into P'way siding. I've routed it to Derby station and then to the P'way siding exit arrow. It's now calling in at signal 423 (P'way siding exit) "waiting for right of way at Derby Way & Works Siding". What is the correct action? Or have I done something wrong? Log in to reply |
| How to get Main Line trains into Derby RTC? 12/10/2019 at 21:10 #120968 | |
9pN1SEAp
1180 posts 
|
I can't see in https://www.SimSig.co.uk/Wiki/Show?page=simulations:derby:panels any mention of slotting Derby RTC?
Jamie S (JAMS) Log in to reply |
| How to get Main Line trains into Derby RTC? 12/10/2019 at 21:27 #120972 | |
|
Albert
1315 posts |
No the wiki needs an update there. Anyway the idea is to call RTC and if it offers you the wrong line, cancel acceptance and request it again. You need it to say Research siding if your train comes from the GL or Way&Works Sdg and P'way if your train comes from the station. I'd also like to see an update to the Way & Works Siding location in the wiki: the pilot line works as well, and it is longer (even though it seems the same length in the sim). Makes it easier to reverse an HST set which would foul the points of the goods lines if routed onto the Connect line. AJP in games Last edited: 12/10/2019 at 21:27 by Albert Reason: None given Log in to reply |
| How to get Main Line trains into Derby RTC? 12/10/2019 at 21:45 #120974 | |
jc92
3685 posts |
Albert in post 120972 said:No the wiki needs an update there.In real life theres no location for the pilot line. the WTT says way and works siding and its up to the signalman to pick which line he prefers at the time. I always use the pilot line for depot shunts or when the goods lines aren't needed. the pilot line is primarily designed for shunting between EPS and 4 shed. "We don't stop camborne wednesdays" Log in to reply |
| How to get Main Line trains into Derby RTC? 13/10/2019 at 00:02 #120979 | |
|
Albert
1315 posts |
Yes, what you just said confirms my suggestion to update the wiki. (Coincidentally, in the Summer 1992 TT, shunts between EPS and 4 Shed are done by reversing at SJN, not on the pilot line. Is this realistic?) AJP in games Log in to reply |
| How to get Main Line trains into Derby RTC? 13/10/2019 at 10:30 #120982 | |
|
jc92
3685 posts |
Albert in post 120979 said:Yes, what you just said confirms my suggestion to update the wiki.Within the limitations of the sim. IRL most reversed on the pilot line however its not possible to do that in the sim without the trains stopping in the wrong place so I've used SNJ. "We don't stop camborne wednesdays" Log in to reply |
| How to get Main Line trains into Derby RTC? 13/10/2019 at 12:12 #120983 | |
|
Phil-jmw
675 posts |
jc92 in post 120982 said:Albert in post 120979 said:Which reversals are we talking about here?Yes, what you just said confirms my suggestion to update the wiki.Within the limitations of the sim. IRL most reversed on the pilot line however its not possible to do that in the sim without the trains stopping in the wrong place so I've used SNJ. Log in to reply |
| How to get Main Line trains into Derby RTC? 13/10/2019 at 12:37 #120984 | |
|
Phil-jmw
675 posts |
Albert in post 120972 said:No the wiki needs an update there.In reality when the signalman offers a train to the RTC the shunter tells him which entrance to send it in via ("in at 418" or "in at 423", referring to the numbers of the outlet signals), and it is then up to the signalman to route the train accordingly to a platform, goods or pilot line to be able to access the correct RTC entrance. This is how I run trains in the sim. Albert in post 120972 said: I'd also like to see an update to the Way & Works Siding location in the wiki: the pilot line works as well, and it is longer (even though it seems the same length in the sim). Makes it easier to reverse an HST set which would foul the points of the goods lines if routed onto the Connect line.Both the Pilot and Connecting lines were used for shunting in and out of Etches Park, but predominantly the Pilot line as when a route was set from DY426 to the Pilot it remained 'Off' until the route was cancelled so the Park could shunt to their heart's content without having to request the signal every time. The Park supervisor would ask "can I have the dolly for a shunt and the signalman would set a route and leve it set until either the Park told him they were done with it or the signalman had another move to make and would ring the Park to ask for it back. Yes a full HST would fit on the Pilot between DY427 and DY479 Sigs, if shunting an HST on the Connecting line ("can I have a shunt 'up the straight'?" ) you had to clear DY428 to allow it to fit behind DY425. Interesting fact 1:- When a route was set from DY422 towards DY428 on the Connecting line the theatre indicator did not illuminate a 'C' for Connecting Line (as it was labelled on the panel), it illuminated an 'N' for Neutral, as the Connecting line was also called. Interesting Fact 2:- When a route was set from DY422 or DY430 to Pfm.5 the theatre indicator did not illuminate with a number (5) as it did for the other platforms (1,2,3,4,6), it illuminated with a 'B' for Bay. Phil. Last edited: 13/10/2019 at 12:38 by Phil-jmw Reason: None given Log in to reply |
| How to get Main Line trains into Derby RTC? 14/10/2019 at 18:04 #121016 | |
VInce
579 posts |
Phil-jmw in post 120984 said:[quote=Albert;post=120972]No the wiki needs an update there.Not wishing to be pedantic Phil, but it was impossible to get into 4,5 or 6 from DY430. I walk around inside the questions of my day, I navigate the inner reaches of my disarray, I pass the altars where fools and thieves hold sway, I wait for night to come and lift this dread away : Jackson Browne - The Night Inside Me Log in to reply |
| How to get Main Line trains into Derby RTC? 14/10/2019 at 23:56 #121040 | |
|
Phil-jmw
675 posts |
VInce in post 121016 said:Phil-jmw in post 120984 said:Thanks for spotting my deliberate mistake Vince, yes sorry I meant DY433 on the Up Main(West).[quote=Albert;post=120972]No the wiki needs an update there.Not wishing to be pedantic Phil, but it was impossible to get into 4,5 or 6 from DY430. Log in to reply The following user said thank you: VInce |