Page 1 of 1
| Adding and Removing Banner Repeaters 26/08/2015 at 08:54 #75452 | |
ajax103
1120 posts |
One for the Developers but if you've already got the signalling diagrams for your sim, is it difficult to then add a banner repeater to a specific signal or even remove a banner repeater?
Log in to reply |
| Adding and Removing Banner Repeaters 26/08/2015 at 08:58 #75453 | |
headshot119
4869 posts |
" said:One for the Developers but if you've already got the signalling diagrams for your sim, is it difficult to then add a banner repeater to a specific signal or even remove a banner repeater?Difficult no not really. Banners are a strange one though, just because it's there on the ground it doesn't always mean that it's even drawn on the panel. And even if it is drawn on the panel it doesn't mean it actually indicates on the panel. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Adding and Removing Banner Repeaters 26/08/2015 at 16:48 #75462 | |
GeoffM
6377 posts |
As Headshot says. Generally though, with CBIs banner repeaters are usually shown on the screens and whether they're lit or not. Not always. Some even show dual banner repeaters with each proved lit separately.
SimSig Boss Log in to reply |
| Adding and Removing Banner Repeaters 26/08/2015 at 17:01 #75463 | |
lazzer
636 posts |
I'm always amused by the way that banner repeaters go back to a "danger" indicator once a train has passed them, but before passing the signal that they repeat. Strictly speaking, it's momentarily showing the "wrong" aspect".
Log in to reply |
| Adding and Removing Banner Repeaters 26/08/2015 at 17:26 #75464 | |
DriverCurran
688 posts 
|
I personally would say that is a safe and correct method of working, Lets imagine a nice thickly lined track on a 60 degree curve and a train fails between with four coaches past the signal (the replacement block joint for which is 6 coaches past the signal) which is 15 coaches in advance of the banner. Now ignoring the rules side of recovery of a failed train, which is safer by giving more of a reminder to the driver of the assistance. A banner indicating that the signal is showing the line is unoccupied (which the track that returns the signal to danger actually is) or a banner showing that there is danger ahead. In the words of a certain recently deceased Liverpool female entertainer the choice is yours...... Paul You have to get a red before you can get any other colour Log in to reply |
| Adding and Removing Banner Repeaters 26/08/2015 at 20:50 #75468 | |
Forest Pines
525 posts |
" said:I'm always amused by the way that banner repeaters go back to a "danger" indicator once a train has passed them, but before passing the signal that they repeat. Strictly speaking, it's momentarily showing the "wrong" aspect".Not all of them do, of course - it depends on the age of the installation. Log in to reply |
| Adding and Removing Banner Repeaters 26/08/2015 at 21:16 #75470 | |
|
headshot119
4869 posts |
" said:" said:Generally speaking older installations don't return to danger with the train between it and the banner. Unless a separate track circuit was already in place between the banner and the signal.I'm always amused by the way that banner repeaters go back to a "danger" indicator once a train has passed them, but before passing the signal that they repeat. Strictly speaking, it's momentarily showing the "wrong" aspect".Not all of them do, of course - it depends on the age of the installation. Newer installations almost always go back. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Adding and Removing Banner Repeaters 26/08/2015 at 21:32 #75471 | |
|
GeoffM
6377 posts |
" said:" said:Sorry but it's little to do with age and more simply to do with "is there a track section joint in a convenient place?". Just tallied a modern, late 2000s installation and only 30% go back. Banner repeaters aren't far from the signal they represent so the chances of a separate track section existing is only more common in stations with pointwork, and I suspect the cost of providing an additional section purely for the purposes of replacing a banner is simply not worth it." said:Generally speaking older installations don't return to danger with the train between it and the banner. Unless a separate track circuit was already in place between the banner and the signal.I'm always amused by the way that banner repeaters go back to a "danger" indicator once a train has passed them, but before passing the signal that they repeat. Strictly speaking, it's momentarily showing the "wrong" aspect".Not all of them do, of course - it depends on the age of the installation. SimSig Boss Log in to reply The following user said thank you: Forest Pines |
| Adding and Removing Banner Repeaters 26/08/2015 at 21:48 #75472 | |
|
headshot119
4869 posts |
" said:" said:I must admit I thought it was a standard to now have a track between a Banner and the Main signal hence my reference to age of installations. Having checked it's only a requirement when the signal it applies to has routes that approach release from red." said:Sorry but it's little to do with age and more simply to do with "is there a track section joint in a convenient place?". Just tallied a modern, late 2000s installation and only 30% go back. Banner repeaters aren't far from the signal they represent so the chances of a separate track section existing is only more common in stations with pointwork, and I suspect the cost of providing an additional section purely for the purposes of replacing a banner is simply not worth it." said:Generally speaking older installations don't return to danger with the train between it and the banner. Unless a separate track circuit was already in place between the banner and the signal.I'm always amused by the way that banner repeaters go back to a "danger" indicator once a train has passed them, but before passing the signal that they repeat. Strictly speaking, it's momentarily showing the "wrong" aspect".Not all of them do, of course - it depends on the age of the installation. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Adding and Removing Banner Repeaters 27/08/2015 at 11:32 #75477 | |
Mattyq
259 posts |
" said:I'm always amused by the way that banner repeaters go back to a "danger" indicator once a train has passed them, but before passing the signal that they repeat. Strictly speaking, it's momentarily showing the "wrong" aspect".An incident occurred in Ipswich (QLD, Australia) involving a Repeat Signal that was not designed to restore after passage (and a running shunt). If you refer to the diagram below.... (Please excuse the crudity of this model. I didn't have time to build it to scale or paint it :lol: )  Train 2 (passenger EMU) arrived from Brisbane and terminated on (curved) platform 4. As it was waiting table to return to Brisbane, a light engine (Train 1) was signalled out of the yard behind IH5. IH15, by this time, had been cleared for Train 2 to depart, thus resulting in Repeat Signal IH15P showing a clear aspect. The Signaller then cleared shunt signal IH5 to IH15 (I can't recall why he didn't send it via P2 or P3). Train 2 moved off then saw IH15P showing clear so started accelerating. Fortunately it stopped before running up the bum of Train 2. As a result of that incident, IH5 was converted into QR's first absolute shunt signal (the Signaller got a hefty kick in the arse too). EDIT NSW colour light Repeat Signals have a Red aspect to prevent just such an incident occurring. Post has attachments. Log in to view them. Not fat ..... fluffy!! (G Iglesias) Last edited: 27/08/2015 at 11:36 by Mattyq Log in to reply |
| Adding and Removing Banner Repeaters 27/08/2015 at 12:08 #75479 | |
|
Danny252
1461 posts |
Perhaps QR should look into Huddersfield controls!
Last edited: 27/08/2015 at 12:12 by Danny252 Log in to reply |
| Adding and Removing Banner Repeaters 27/08/2015 at 12:40 #75481 | |
Steamer
3986 posts
|
" said:Perhaps QR should look into Huddersfield controls!I thought that, but is it generally applied to routes from shunt signals? A quick test on SimSig suggests not. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Adding and Removing Banner Repeaters 27/08/2015 at 12:55 #75483 | |
|
Mattyq
259 posts |
One point worth noting - until that incident occurred, all QR shunt signals would clear onto an occupied track unless it is a running shunt (called a "Leading Shunt" in QR) which has been cleared as part of a running route. This is why I used to get confused with Simsig when certain shunt signals would not clear onto an occupied track (and designed that way).
Not fat ..... fluffy!! (G Iglesias) Log in to reply |
| Adding and Removing Banner Repeaters 27/08/2015 at 13:47 #75488 | |
|
clive
2789 posts |
" said:In current UK (and SimSig) practice that would be forbidden by Huddersfield Control for just this reason. ("waiting table"?) Log in to reply |
| Adding and Removing Banner Repeaters 27/08/2015 at 16:33 #75492 | |
|
DriverCurran
688 posts
|
And that rests the case for the prosecution lol  A slightly different situation Matt but the same effect.Paul You have to get a red before you can get any other colour Log in to reply |
| Adding and Removing Banner Repeaters 28/08/2015 at 01:06 #75499 | |
|
Mattyq
259 posts |
" said:"Waiting timetabled departure time" (verbal). Else "Waiting time" (ambiguous) or "waiting TT" (written). In reality, "Waiting for the Guard to:- a. Go for a wee walk b. Have a smoke (½km walk each way to a smoking zone) c. Buy a pie for the return trip d. Put a bet on". (Strike out that which does not apply). :yikes :doh :lol: Not fat ..... fluffy!! (G Iglesias) Log in to reply |