Page 1 of 1
| Tebay Run-Round 11/01/2017 at 16:02 #91456 | |
HST125Scorton
1191 posts |
Could anyone assist me here with a Run-Round at Tebay? I have 6C27 Carlisle N.Y. to Shap Summit Quarry formed of 1x 68 and 16 MOA Ballast Wagons, when it arrives at Tebay it should detach from it's train and run round (-RR-) and re join its train at the other end ready to depart North to Shap Summit Quarry. Upon arrival it sits there and rings in saying waiting at signal.. Under F2 its at red signal it hasn't uncoupled. I've tried redoing the events but still won't do anything. I have provide screenshots. Any help to fix would be wonderful as I'm nearly half way though timetable testing for my Carlisle October 2016. *RE-Uploaded Images* Post has attachments. Log in to view them. Aaron (AJRO) | Timetable Writer Last edited: 12/01/2017 at 10:57 by HST125Scorton Reason: Re-Upload Images Log in to reply |
| Tebay Run-Round 11/01/2017 at 16:16 #91459 | |
Steamer
3985 posts |
To confirm, the train is stuck waiting at CE111, which isn't clearing? Do you have failures turned on? "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Tebay Run-Round 11/01/2017 at 16:17 #91460 | |
|
HST125Scorton
1191 posts |
Once it approaches that signal clears and it goes into the loop as it should. Failures are off as timetable testing. Aaron (AJRO) | Timetable Writer Log in to reply |
| Tebay Run-Round 11/01/2017 at 17:08 #91462 | |
|
Steamer
3985 posts |
HST125Scorton in post 91460 said:Once it approaches that signal clears and it goes into the loop as it should.So 6C27 reports as waiting at CE104, and doesn't divide? "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Tebay Run-Round 11/01/2017 at 17:14 #91464 | |
|
HST125Scorton
1191 posts |
Yes that's what happens. Just sits at signal awaiting to go without doing the uncoupling.
Aaron (AJRO) | Timetable Writer Log in to reply |
| Tebay Run-Round 11/01/2017 at 17:16 #91465 | |
|
Steamer
3985 posts |
Not related to your Carlisle problem, but the failure to embed images with spaces in the filename has been reported, Mantis 16451.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Tebay Run-Round 11/01/2017 at 17:16 #91466 | |
|
Steamer
3985 posts |
HST125Scorton in post 91464 said:Yes that's what happens. Just sits at signal awaiting to go without doing the uncoupling.Does the train fit in the DGL without hanging off the back, and can you attach a saved game? "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Tebay Run-Round 11/01/2017 at 17:17 #91467 | |
postal
5265 posts |
It would help if you could either upload a saved game or a copy of the TT Screenshots don't tell an awful lot about what is happening. EDIT: Steamer posted while I was typing! “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 11/01/2017 at 17:17 by postal Reason: edit Log in to reply |
| Tebay Run-Round 11/01/2017 at 17:59 #91468 | |
|
HST125Scorton
1191 posts |
I've attached a save bare in mind there will be telephone calls from couple of trains and Kingmoor. I'll try the images again.   Post has attachments. Log in to view them. Aaron (AJRO) | Timetable Writer Log in to reply |
| Tebay Run-Round 11/01/2017 at 18:15 #91469 | |
|
Steamer
3985 posts |
Thanks. Judging by the save, the train isn't recognising the loop as part of the Tebay location in the Up direction. If you reverse the train, so it 'arrives' in the Down direction, it recognises the location and starts to divide, though obviously at the wrong end. To fix it, it really needs a simulation update, which will only happen when the Loader version (which is in testing) is ready. A short term fix would be to dump it in the CE sidings for a minimum of 15 minutes and 'imagine' the run-round. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following user said thank you: HST125Scorton |
| Tebay Run-Round 11/01/2017 at 18:19 #91471 | |
|
HST125Scorton
1191 posts |
Thank you Steamer. Hope the loader version under testing will sort this and the issue I had at Hardendale Quarry previously reported. I'll possibly run it out to Carnforth North Jn.. then let it re-enter the sim back to Shap Summit for now. Aaron (AJRO) | Timetable Writer Log in to reply |
| Tebay Run-Round 11/01/2017 at 18:28 #91472 | |
MarkC
1105 posts |
This may sound strange, but are you using the latest version. I ask as I tried loading the save into mine and It would not load, but (luckily) I have an older version and it loads fine. The current version is carlisle_v3_238_2, save will not load for me on this one From what I can tell your version is carlisle_v3_238_1 It maybe that the issue you are having has been fixed and is in the latest release Log in to reply The following user said thank you: HST125Scorton |
| Tebay Run-Round 11/01/2017 at 18:31 #91473 | |
|
HST125Scorton
1191 posts |
Thanks Mark.. I'm using a wrong version by the looks just checked and shows carlisle_v3_238_1 I'll download the latest version unknown why I have this version.. Aaron (AJRO) | Timetable Writer Log in to reply The following user said thank you: MarkC |
| Tebay Run-Round 11/01/2017 at 18:32 #91474 | |
|
MarkC
1105 posts |
HST125Scorton in post 91473 said:Thanks Mark.. I'm using a wrong version by the looks just checked and shows carlisle_v3_238_1No worries If you want to play the save tho you will be unable to as it will not load, save game is not compatible, that's how I figured the version you have Last edited: 11/01/2017 at 18:34 by MarkC Reason: edit Log in to reply The following user said thank you: HST125Scorton |
| Tebay Run-Round 11/01/2017 at 18:34 #91475 | |
|
HST125Scorton
1191 posts |
Cheers Mark. I've uninstalled and will reinstall Carlisle_v3_238_2. It don't matter about the save as I have to look into removing some trains and altering some others too. Aaron (AJRO) | Timetable Writer Log in to reply The following user said thank you: MarkC |