Page 1 of 1
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 18:25 #96055 | |
njimiller
141 posts |
Loader 4.6.4 Leeds Northwest Version 1.1 Timetable: 15/10/09 1.1.0 Running in ARS mode 2DXX Ilkley bound services at Esholt JN route towards Guiseley P2 rather P1. In the attached save this will happen when 2D30 is made ARS. The timetable for 2D30 was manually adjusted to specify P1 at Guiseley but this makes no difference. Nick Post has attachments. Log in to view them. Log in to reply |
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 20:21 #96060 | |
postal
5263 posts 
|
njimiller in post 96055 said:Loader 4.6.4Haven't got the sim so am speaking from theory rather than from examining the save. There may be an answer in the way that you amended the TT. As a start there are a couple of questions about the TT adjustment. 1) Was 2D30 already in sim when you adjusted the TT? 2) If it was in sim, did you adjust the TT through F2 or F4? Reason for the questions is because of the way that the core code handles TTs. If the train is already in sim, then adjusting the TT through F4 does not change the TT for the train in sim, although if you save the TT then the adjustment will show next time the TT is run. Conversely, if you adjusted the TT through F2 then that should amend the TT for the train in sim but will not be saved to the file copy of the TT and will run to the unamended TT next time the sim is run. So, if 2D30 was in sim and you adjusted the TT through F4, the train in sim still thinks it is due to P2 and will be routed there by the ARS. If that isn't the answer someone else will be able to add their two penn'orth. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 29/06/2017 at 20:22 by postal Reason: None given Log in to reply |
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 20:28 #96061 | |
|
Noisynoel
989 posts |
I've just run the save with no issue. I am running a newer version than everyone else but I havn't amended anything in that are between v1.1 & v1.2 Can someone running v1.1 please run the save and see what occurs. Has anyone else found this issue. It hasn't been mentioned on the forum as yet Noisynoel Log in to reply |
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 20:44 #96062 | |
|
JamesN
1607 posts |
Noisynoel in post 96061 said:I've just run the save with no issue. I am running a newer version than everyone else but I havn't amended anything in that are between v1.1 & v1.2Loader 4.6.4 Sim 1.1 Unable to Reproduce; when 2D30 is made ARS it correctly routes the train towards the Down Ilkley Main. EDIT I take that back... http://imgur.com/a/T1sIx Last edited: 29/06/2017 at 20:54 by JamesN Reason: None given Log in to reply |
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 21:07 #96064 | |
|
njimiller
141 posts |
Which of course it does for me now too. However... I've taken the same game and run it forward with 2D32 and the error is repeated. As 2D32 gets to Baildon ARS states 2V07 is already on the stretch of track and then once Guiseley P2 is clear then 2D32 routes towards P2. However - 2D32 routes towards P1 IF 2D33 is already occupying the track towards P2 - hence why I've collared signal 3948 to prevent this. So - ARS will route 2DXX trains to P1 only as an alternative if P2 has a route set to it from Ilkley. Nick Post has attachments. Log in to view them. Log in to reply |
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 21:10 #96065 | |
|
Noisynoel
989 posts |
It looks like the timetable does not have a platform shown, hence it routes it incorrectly
Noisynoel Log in to reply |
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 21:19 #96066 | |
|
njimiller
141 posts |
In the first saved game I added P1 to 2D30's timetable but it made no difference. It still routed to P2. I know that can't be reproduced in that save as the route to P2 from Ilkley has just been set. I will test it by altering a 2DXX timetable for one that hasn't already entered the sim. Nick. Last edited: 29/06/2017 at 21:19 by njimiller Reason: None given Log in to reply |
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 21:24 #96067 | |
|
Noisynoel
989 posts |
If you amend a trains timetable via F2 after it has entered ARS "May" not work, hence the warning message when you do it
Noisynoel Log in to reply |
| 2DXX Ilkley services at Esholt JN 29/06/2017 at 23:15 #96068 | |
|
JamesN
1607 posts |
#17563 on the bug tracker.
Log in to reply |
| 2DXX Ilkley services at Esholt JN 30/06/2017 at 00:46 #96071 | |
|
Sacro
1171 posts |
Noisynoel in post 96065 said:It looks like the timetable does not have a platform shown, hence it routes it incorrectlyPlatforms are not required to be given, trains shouldn't cross over unless told to. Log in to reply |
| 2DXX Ilkley services at Esholt JN 30/06/2017 at 07:16 #96073 | |
|
njimiller
141 posts |
Thanks for the replies. Just to confirm I've tried this by editing the timetable of 2D32 before it had entered the sim by specifying P1 and adding Esholt Jn as a passing location. 2D32 waits for 2V07 to clear the line and then routes to P2. Ilkley bound 2VXX services correctly go via P1. As noted above, if a 2DXX service from Ilkley has already taken up the track towards P2, then the 2DXX service to Ilkley will go to P1. Thanks Nick Post has attachments. Log in to view them. Log in to reply |
| 2DXX Ilkley services at Esholt JN 30/06/2017 at 09:52 #96074 | |
|
Noisynoel
989 posts |
The bug your experiencing is caused by the TT not having P1 in it. However, it should in theory work 99% of the time, which probably explains why no one has found this issue up until now. For the sim to work 100% it requires P1 added to every train (yes I know they are not mandatory, I know they are not in the CIF, however, they are required by SimSig to guarantee success). I have sent an update to Geoff for release which will cause the sim to auto populate the platform field in the timetable. This will ensure it gets the correct route.
Noisynoel Log in to reply The following user said thank you: njimiller |