Page 1 of 1
| Lack of Signal Failures 03/08/2010 at 11:18 #1553 | |
Louis
32 posts |
I have recently noticed that on Exeter Simsig, it is impossible for me to get Signal Failures. On Bristol Simsig I can get signal failures where the lamp appears to have ran out, and needs replacing, but I can never get this to happen in Exeter, Anyone know whats wrong?
Log in to reply |
| Lack of Signal Failures 03/08/2010 at 11:18 #10414 | |
|
Louis
32 posts |
I have recently noticed that on Exeter Simsig, it is impossible for me to get Signal Failures. On Bristol Simsig I can get signal failures where the lamp appears to have ran out, and needs replacing, but I can never get this to happen in Exeter, Anyone know whats wrong?
Log in to reply |
| Lack of Signal Failures 03/08/2010 at 12:10 #10415 | |
postal
5265 posts |
Louis Apologies if you've already done it, but have you checked the Failures tab on the F3 screen to see where the slider for signal failures is set? JG “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Lack of Signal Failures 03/08/2010 at 19:25 #10436 | |
|
UKTrainMan
1803 posts |
I have run Exeter at full speed on maximum signal failures and a maximum of 6 simultaneous failures set and I set as many routes as possible throughout the simulation then eventually cancelled the routes in reverse. The time had exceeded 09:00 and I didn't get any signal or signal lamp failures. I know for a fact that Track Circuit Failures and Points Failures happen as you will see from the 'Incident Reports' listed here so it's certainly odd not to get any Signal / Signal Lamp Failures. I trust this helps, slightly. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| Lack of Signal Failures 03/08/2010 at 19:40 #10440 | |
Peter Bennet
5402 posts |
Well spotted nothing is coded to fail...... Funnily enough I was doing a bit of titivation to Exeter in the last couple of days so will deal with it shortly. Closer inspection some things are coded to fail but not much Peter I identify as half man half biscuit - crumbs! Log in to reply |
| Lack of Signal Failures 12/08/2010 at 09:36 #10670 | |
|
jdtech
69 posts |
On a very similar note albeit different sim, are there any plans to update Southampton so that it has points failures/track circuit failures/signal failures? When the new version was released, I'm pretty sure it was mentioned an update with "failures" would be provided.
Log in to reply |
| Lack of Signal Failures 12/08/2010 at 12:31 #10674 | |
|
Peter Bennet
5402 posts |
There were plans to update all the Sims under the 'refresh' program and that includes Southampton. However, due to life getting in the way not every one has been finished yet. Peter I identify as half man half biscuit - crumbs! Log in to reply |