Page 1 of 1
Auto joining 0E951??? 12/08/2010 at 18:00 #1611 | |
computeringjl
![]() 29 posts |
Playing 1985 v1.112 timetable, i hv 7E951 stopped at Broms UGL. 0E951 is behind 7E951, not joined with it, but it says 'waiting to depart but 7E951 in front'. Now, why's 0E951 not joining with 7E951 or vice versa, even when it's 0051. Log in to reply |
Auto joining 0E951??? 12/08/2010 at 18:00 #10689 | |
computeringjl
![]() 29 posts |
Playing 1985 v1.112 timetable, i hv 7E951 stopped at Broms UGL. 0E951 is behind 7E951, not joined with it, but it says 'waiting to depart but 7E951 in front'. Now, why's 0E951 not joining with 7E951 or vice versa, even when it's 0051. Log in to reply |
Auto joining 0E951??? 13/08/2010 at 00:20 #10698 | |
BarryM
![]() 2158 posts |
May be a timetable issue. see http://www.SimSig.co.uk/index.php?option=com_agora&task=topic&id=868&Itemid=54see BarryM Barry, Sydney, New South Wales, Australia Log in to reply |
Auto joining 0E951??? 16/08/2010 at 14:10 #10752 | |
UKTrainMan
![]() 1803 posts |
That said, when I tested this out myself I noted I had to fiddle with 0E951 a bit whilst it was in the Bankers Spur - reversing it or telling it to shunt forward after you've reassigned the headcode worked for me but then once I had signalled it up to 7E951 I had to step-up the timetable to make the join actually happen successfully. Assuming you have the save file, try opening it, go to F2 Train List, right click on 0E951 and under Timetable Options select Edit Timetable, then go to the Location List, click on the second of the two "Bromsgrove (South)" locations and click the big "Set as current/next location" button and the join will then work successfully. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
Auto joining 0E951??? 16/08/2010 at 16:54 #10757 | |
computeringjl
![]() 29 posts |
Thanks UKTM. finally it worked Is that the only way the join will ever work (in v2.201) between the banker and the assisting train? Log in to reply |
Auto joining 0E951??? 19/08/2010 at 17:23 #10830 | |
Albert
![]() 1315 posts |
No, normally they would join automatically. Other trains than 0E951 do so.
AJP in games Log in to reply |
Auto joining 0E951??? 24/03/2011 at 14:41 #14191 | |
Fireman Pat
![]() 69 posts |
I'm also having similar problems....Can't get 0E161 to join a freight in the UGL at Bromsgrove. TT list tells me that 0Z00 (the LE that enters the TT at Longbridge at 0001hrs) has been terminated and has no more timetable trips. Also, I'm trying to run round the parcels train in Pl 4. Managed to get loco on to up main, but cannot find a way to get it up to Sig 448 via the Up Relief...which is what the TT calls for. Other than that, an enjoyable sim. Log in to reply |
Auto joining 0E951??? 24/03/2011 at 15:04 #14192 | |
postal
![]() 5216 posts |
Fireman Pat 1) You need to go into F2, right click on the TD for 0Z00 and then under Timetable click on Run to another Timetable. You then need to find 0E161 in the drop-down list. Once that is selected, you should be able to signal forward from the spur and buffer up to the service train. It should then join automatically. Don't forget that the outlet signal from the loop (171) has a three minute delay from setting until it clears so that you will have time for a PNB after you have set the route before the train sets away. 2) Depends where you are on the Up Main as the line from Awre is Up Main all the way into Gloucester. When I've run the sim, I signal the train from 358 (west end of P4) to 162 on the Up Main, but using the white triangle rather than the signal head to set the route. I can't remember if that takes the loco past 31 or not. Then signal back from either 31 or 415 to 233 on the Up Rlf, then 429. This will turn the loco round at 448 and you then signal back from 448 to 358 to clear the route back into P4 for the re-couple. You can just as easily use the Up Main rather than the Up Rlf and I don't think there are any penalties (signalling from 31 or 415 to 35 and then 429) so I wouldn't worry about sticking rigidly to the timetable designations in a situation like that. It depends what else is about at the time you need to make the move. Post back if there are any more problems. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
Auto joining 0E951??? 24/03/2011 at 17:11 #14194 | |
Fireman Pat
![]() 69 posts |
Thanks Postal, I have sorted out the paper train at P4. Did what you suggest re Lickey Banker but I now get a message in F2 'waiting for joining train 7E16' which already occupies the UGL at Bromsgrove. Log in to reply |
Auto joining 0E951??? 24/03/2011 at 18:26 #14199 | |
postal
![]() 5216 posts |
Two tricks which might assist the join. 1) Go into F2, right click on 0E161, then Timetable and Edit Timetable. If the current location (bold type) is not the line of the TT containing the Join instruction, click on that line to highlight then click on the Current/Next Location button. 2) F2, Signalling and click on Shunt Forward. There are other tricks but one of those 2 should work. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
Auto joining 0E951??? 24/03/2011 at 19:31 #14201 | |
Fireman Pat
![]() 69 posts |
Thank you very much for all your help Postal. Very much appreciated. Sorted both problems.
Log in to reply |