Page 1 of 2
A few bugs found. (Scrolly) 09/12/2010 at 19:33 #2098 | |
DrPepperExpress
![]() 44 posts |
Hi Folks. ![]() I have been working on my TT to add a few more bits and pieces and tidy a few things up that were left a mess in the first release version and have FINALLY remembered to report a few really annoying bugs i've found in the scrolly version. 1) I'm not 100% sure on this actually being a bug, but i don't ever remember seeing anything like it on the real life route, so here goes. Just west of Woodborough traveling toward Westbury, line speed drops to 60 mph for passenger traffic, and 40 for freight somewhere in the region of sig DW81. Is this accurate? Or is it actually a bug? As in the other direction, line speed remains at 100 mph. 2) Signaling a train out of Westbury Cement Works towards Westbury or Hawkeridge junction results in the TT not stepping up and acknowledging that Heywood Road Jn has been passed. You need to manually open F2, edit TT and reset the location to either Westbury or Hawkeridge Jn. 3) Sig R484 (Shunt sig for Newbury Racecourse Up Sdg) doesn't always clear when it's supposed to regardless of whether you're shunting into the Up siding, or over to the Racecourse loop platform. Seems a bit hit and miss as to whether it responds or not. Hope that all makes sense! There were a couple of others i found as well while i was making the original version, but at the moment can not for the life of me remember what they were!! If i come across them while testing this version ill pop another post here. Kindest regards, Simon. ![]() Log in to reply |
A few bugs found. (Scrolly) 09/12/2010 at 19:33 #12844 | |
DrPepperExpress
![]() 44 posts |
Hi Folks. ![]() I have been working on my TT to add a few more bits and pieces and tidy a few things up that were left a mess in the first release version and have FINALLY remembered to report a few really annoying bugs i've found in the scrolly version. 1) I'm not 100% sure on this actually being a bug, but i don't ever remember seeing anything like it on the real life route, so here goes. Just west of Woodborough traveling toward Westbury, line speed drops to 60 mph for passenger traffic, and 40 for freight somewhere in the region of sig DW81. Is this accurate? Or is it actually a bug? As in the other direction, line speed remains at 100 mph. 2) Signaling a train out of Westbury Cement Works towards Westbury or Hawkeridge junction results in the TT not stepping up and acknowledging that Heywood Road Jn has been passed. You need to manually open F2, edit TT and reset the location to either Westbury or Hawkeridge Jn. 3) Sig R484 (Shunt sig for Newbury Racecourse Up Sdg) doesn't always clear when it's supposed to regardless of whether you're shunting into the Up siding, or over to the Racecourse loop platform. Seems a bit hit and miss as to whether it responds or not. Hope that all makes sense! There were a couple of others i found as well while i was making the original version, but at the moment can not for the life of me remember what they were!! If i come across them while testing this version ill pop another post here. Kindest regards, Simon. ![]() Log in to reply |
A few bugs found. (Scrolly) 09/12/2010 at 21:38 #12850 | |
Peter Bennet
![]() 5377 posts |
1 I'll need to check. 2 Fixed now 3 I take it you are routing to the siding in which case it's set to be approach released- other routes don't but that does not seem right so amended to no Approach release. Thanks Peter I identify as half man half biscuit - crumbs! Log in to reply |
A few bugs found. (Scrolly) 10/12/2010 at 08:44 #12852 | |
DrPepperExpress
![]() 44 posts |
Ok Peter, thanks. Found another one of them, i am unable to route a train from Westbury's platform 1 into the Down Trowbridge siding. I'm sure that's possible on the real PSB as i vaguely remember seeing one of the guys there (Ian i think...) route a unit from P1 into that siding when we where there on a visit last year. Log in to reply |
A few bugs found. (Scrolly) 11/12/2010 at 00:52 #12860 | |
DrPepperExpress
![]() 44 posts |
I've just been going through the timetable ticking some of the 'Runs as required or as a special' boxes, and setting percentages. It turns out that if i do more than 1 at a time without saving, SOME services have that box UNTICKED and it seems there is no exact order of why or which ones will be unticked when i next check. It's quite frustrating. ![]() The TT's now reached 346 rules and 727 trains, and probably 200 odd of them are freights, most of which i want ticked and percentages added for random entries every time i run the game to hopefully give a much more varied feel. But this is proving difficult because of the sim, seemingly, unticking the boxes i've already ticked! :O I know i've not untcked them myself, and in some cases i've even been double or triple checking them to make sure, but two or three saves/reloads later i'd say probably about 1 out of every 5 are unticked again. Have i reached some sort of limit? Has anyone else ever had this problem? What am i doing wrong - if anything? :: Log in to reply |
A few bugs found. (Scrolly) 11/12/2010 at 14:23 #12861 | |
DrPepperExpress
![]() 44 posts |
Further to the above, i've just been running some more tests to try and get to the bottom of it. It seems however, that when one of the 'ticked' services enter the area it's box is automatically being unticked, which is something i haven't noticed before. This then means - once i make a change to one of my other services and test it's new timings or whatever, if a 'ticked' service comes in, and i save once i'm happy with the service i've been testing, the TT then saves the 'ticked' service unticked. So i'm going to assume that this is normal, slap my self on the wrist and sort the TT issues out first, and sort out the ticky boxes last. Log in to reply |
A few bugs found. (Scrolly) 11/12/2010 at 15:56 #12863 | |
Peter Bennet
![]() 5377 posts |
If all else fails you can check via a txt version and see if the relevant flags are correctly set, which might be easier than checking through each train individually. Also can't see any particular problem with routing trains from P1 to the siding, which either means its since been fixed or I've misunderstood the problem- is it that you can't set the route or there is some difficulty in getting a train to proceed? Peter I identify as half man half biscuit - crumbs! Log in to reply |
A few bugs found. (Scrolly) 11/12/2010 at 16:57 #12865 | |
DrPepperExpress
![]() 44 posts |
The problem is i can not set a route from P1 into Dn Trow. Sdg. I get told "No route between selected signals". If you aren't having any difficulty then you've already fixed it. ![]() Log in to reply |
A few bugs found. (Scrolly) 11/12/2010 at 20:35 #12869 | |
Danny252
![]() 1461 posts |
From Signal 798 to Signal 102? Works fine for me. You sure you're clicking the right signals?
Log in to reply |
A few bugs found. (Scrolly) 11/12/2010 at 20:39 #12870 | |
DrPepperExpress
![]() 44 posts |
Opposite direction. ![]() Sig 411 onward to the Down Siding is where i can't signal from/to. Log in to reply |
A few bugs found. (Scrolly) 12/12/2010 at 11:22 #12873 | |
DrPepperExpress
![]() 44 posts |
Peter, has the location for the East Somerset Railway been added? All signals are in place to access the line but with no location for it you have to tell everything to PSAD to get in there.
Log in to reply |
A few bugs found. (Scrolly) 12/12/2010 at 12:20 #12874 | |
Danny252
![]() 1461 posts |
DrPepperExpress said:Opposite direction.I'll go brush up my reading skills! Now I see your problem. Log in to reply |
A few bugs found. (Scrolly) 13/12/2010 at 14:18 #12886 | |
clive
![]() 2766 posts |
DrPepperExpress said:Further to the above, i've just been running some more tests to try and get to the bottom of it. It seems however, that when one of the 'ticked' services enter the area it's box is automatically being unticked, which is something i haven't noticed before.Hmm. This isn't ideal behaviour. I'll look into it when I get time. Another reason for using the text format to develop timetables :-) Log in to reply |
A few bugs found. (Scrolly) 15/12/2010 at 09:41 #12896 | |
GeoffM
![]() 6344 posts |
DrPepperExpress said:1) I'm not 100% sure on this actually being a bug, but i don't ever remember seeing anything like it on the real life route, so here goes. Just west of Woodborough traveling toward Westbury, line speed drops to 60 mph for passenger traffic, and 40 for freight somewhere in the region of sig DW81. Is this accurate? Or is it actually a bug? As in the other direction, line speed remains at 100 mph.At the time the simulation was released, a PSR speed limit of 40/60 existed 83mi 40ch to 83mi 55ch on the Down line only. There were also a couple of other restrictions not mirrored on the other line. I note that the latest Sectional Appendix no longer has these so the restrictions must have since been lifted at some point. SimSig Boss Log in to reply |
A few bugs found. (Scrolly) 15/12/2010 at 12:16 #12900 | |
DriverCurran
![]() 685 posts |
Suspect this may have been changed during the transfer from Reading to Thames Valley SC. One of the routes I used to work over had a 30 mph on the up line only, which I had been told that there was a temporary speed imposed back in the dark ages and the person who imposed the speed never took it off. Nobody else was willing to declare the line fit for 55 mph line speed so it stayed. A couple of years back they resignalled the route and the line speed was then raised back to the original speed of 55 mph, so it can happen. Paul You have to get a red before you can get any other colour Log in to reply |
A few bugs found. (Scrolly) 15/12/2010 at 12:44 #12902 | |
Peter Bennet
![]() 5377 posts |
DrPepperExpress said:Peter, has the location for the East Somerset Railway been added? All signals are in place to access the line but with no location for it you have to tell everything to PSAD to get in there.Does appear to be a missing location in the Sim but I can't see why it would be necessary to PSAD unless there is also a route setting bug. Maybe you mean abandon timetable as it will, most likely, stick at the final timetable location. Peter I identify as half man half biscuit - crumbs! Log in to reply |
A few bugs found. (Scrolly) 28/01/2011 at 09:54 #13352 | |
Haraubrad
![]() 103 posts |
Hi There, I don't think this has been reported before, if it has apologies. I had the overlap track for 160 signal fail. I authorised the next train to pass the signal and exmine the line. The train proceeded as far as E 170 signal and stopped but did not phone in, it just stuck there for about 15 minutes. To get things moving I had to erase the train. Has anyone else experienced this Aubrey Log in to reply |
A few bugs found. (Scrolly) 30/01/2011 at 19:48 #13362 | |
Peter Bennet
![]() 5377 posts |
Just tested and seems OK though that's on a new build in terms of calling in. There is one thing though- SE170 is not a Westbury signal- so I guess we have to assume the call has come from Exeter box- probably too difficult to sort that out but I'll raise a ticket. I identify as half man half biscuit - crumbs! Log in to reply |
A few bugs found. (Scrolly) 14/05/2011 at 20:18 #15808 | |
DrPepperExpress
![]() 44 posts |
Signal 195 at Frome in the sim only hs 3 aspects. After having been to Frome today on my mountain bike with James, we both noticed that this signal is actually FOUR aspect. It was also like that about this time last year when me and a mate popped into the Focus(?) DIY shop outside the station. Log in to reply |
A few bugs found. (Scrolly) 14/05/2011 at 23:12 #15814 | |
UKTrainMan
![]() 1803 posts |
DrPepperExpress said:Signal 195 at Frome in the sim only hs 3 aspects.Taking a 'stab in the candle-lit dark' here but is there a chance that this signal was three aspect when the data for the simulation was provided during the development process? Just a thought. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
A few bugs found. (Scrolly) 15/05/2011 at 09:05 #15819 | |
Peter Bennet
![]() 5377 posts |
UKTrainMan said:DrPepperExpress said:Am wondering that myself- having just looked at the Sim to have 195 4Aspect would seem odd given that the preceding and succeeding signals are 3A (in Sim). Was the area resignalled or have they used a 4A head but blanked out the second Y?Signal 195 at Frome in the sim only hs 3 aspects.Taking a 'stab in the candle-lit dark' here but is there a chance that this signal was three aspect when the data for the simulation was provided during the development process? Just a thought. Peter I identify as half man half biscuit - crumbs! Log in to reply |
A few bugs found. (Scrolly) 15/05/2011 at 10:07 #15820 | |
DrPepperExpress
![]() 44 posts |
To the best of my knowledge none of that area has been resignalled since i moved here. I've been here 2 and a half years.The signal head is well worn, that is to say it doesn't look any newer than the others. Cab ride videos also come in handy. ![]() And the signal head is capable of showing all four aspects, i saw that yesterday, although only for a flash, as the route worked through from Danger to Clear. It's possible perhaps, although understand i'm not laying blame here, that whoever made the sim at first just went on the assumption that because the westbound exit from Frome is 3 aspect, it would be the same Eastbound? Log in to reply |
A few bugs found. (Scrolly) 15/05/2011 at 11:38 #15821 | |
Peter Bennet
![]() 5377 posts |
All the plans for Westbury I have just show the signal location as a generic icon, without the normal range of aspects. I'm disinclined to change it at this stage unless we know for sure that it's a one-off 4A or what other signals are also needing changed. Peter I identify as half man half biscuit - crumbs! Log in to reply |
A few bugs found. (Scrolly) 15/05/2011 at 11:59 #15822 | |
Underwood
![]() 746 posts |
Peter Bennet said:All the plans for Westbury I have just show the signal location as a generic icon, without the normal range of aspects. I'm disinclined to change it at this stage unless we know for sure that it's a one-off 4A or what other signals are also needing changed.I'm sure Simon and me could go out again on another cycle ride and get info for all the main signals between Frome and Fairwood Road or from Blatchbridge? Is this the area you would want info on Peter? Log in to reply |
A few bugs found. (Scrolly) 15/05/2011 at 12:10 #15824 | |
DrPepperExpress
![]() 44 posts |
Between Frome and Fairwood Jn would be pointless Jay, as the signals between Clink and Fairwood Jn's are correct in the sim. Between Frome and Clink Rd Jn is where the big fat question mark is atm. I'm not sure it would be possible to get photographic evidence of all 3 signals between Frome and Clink Rd jn by bike. We may need to try and find a kind driver who'd let one of us in the cab, or maybe knock on a few doors at Westbury and see if anyone would be willing to share information. Log in to reply |