Upcoming Games

(UTC times)


Full list
Add a game

Upcoming Events

No events to display

Who's Online

Person82, jem771, waucott, Kage, uboat, BenWright (6 users seen recently)

Minor Edinburgh Niggles

You are here: Home > Forum > Simulations > Released > Edinburgh > Minor Edinburgh Niggles

Page 1 of 1

Minor Edinburgh Niggles 25/06/2011 at 17:26 #3296
agilchrist
Avatar
258 posts
During the testing of the 85 tt noticed the following odd things some of which maybe known

    If glencraig gf is released whilst the track circuit still illuminated then an exception error occurs on windows. the train came from thornton going up on the bidi down
      The lengths of p20/21 are missing from the wiki however a long train can fit in the sls but not in either platform, in fact the length of train in the platform is very short in comparison to even p10.
        Cockenzie PS gave a slot to a train which was in the up loop then proceeded to release a train towards the loop, this maybe possible but was unexpected
          Trains are assuming the nll position is a platform, so if your going to p1 and you have to check the train at the signal then it assumes its arrived and the passengers are systematically killed falling onto the track

          Hope these all make sense, im sure some if not all are known

          Blessed are the true believers, for only they shall walk the Path, and they shall be welcomed unto the realm of the Ori and made as one with Them.
          Log in to reply
          Minor Edinburgh Niggles 25/06/2011 at 17:26 #16982
          agilchrist
          Avatar
          258 posts
          During the testing of the 85 tt noticed the following odd things some of which maybe known

            If glencraig gf is released whilst the track circuit still illuminated then an exception error occurs on windows. the train came from thornton going up on the bidi down
              The lengths of p20/21 are missing from the wiki however a long train can fit in the sls but not in either platform, in fact the length of train in the platform is very short in comparison to even p10.
                Cockenzie PS gave a slot to a train which was in the up loop then proceeded to release a train towards the loop, this maybe possible but was unexpected
                  Trains are assuming the nll position is a platform, so if your going to p1 and you have to check the train at the signal then it assumes its arrived and the passengers are systematically killed falling onto the track

                  Hope these all make sense, im sure some if not all are known

                  Blessed are the true believers, for only they shall walk the Path, and they shall be welcomed unto the realm of the Ori and made as one with Them.
                  Log in to reply
                  Minor Edinburgh Niggles 25/06/2011 at 22:09 #16986
                  Peter Bennet
                  Avatar
                  5402 posts
                  Glencraig: Added a test or O/L dropped (equivalent to train arriving at GF)

                  P20/21 are both 295m but you do lose a few m as trains stop short by around 9m as I recall- I'll double check is all adds up.

                  Cockenzie has since been fixed

                  The NLL bit is a known issue that there was no easy solution to- may revisit to see if code code updates alter its operation.

                  Peter

                  I identify as half man half biscuit - crumbs!
                  Log in to reply
                  Minor Edinburgh Niggles 25/06/2011 at 23:11 #16987
                  postal
                  Avatar
                  5265 posts
                  Alan

                  While Peter is working out the code to fix for the Platform 1 problem, there is a fix which will work for most operational circumstances. The stopping point needs to be set as Edinburgh Waverley (East) rather than Edinburgh Waverley. You then see the train waiting at red signal if it is held at the South end of P19 or NLL.

                  If you do have to put the train into P10 or P20/21 because things are going belly-up, you then get a message about waiting at red signal at the South end of the platform, which you can work round by editing the TT in F2 without depositing passengers in the 6ft.

                  This won't help if you are putting the train into P1 when it should have gone to P10/19/20/21 or one of the North End terminators, but it may solve some of the problems.

                  JG

                  “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
                  Log in to reply
                  Minor Edinburgh Niggles 02/07/2011 at 00:07 #17124
                  agilchrist
                  Avatar
                  258 posts
                  Thanks for the replies been trying various solutions but whats been working best is reducing the use of that side of the station just a few trains has made all the difference as it provides some gaps so trains can be routed into the platform.

                  i am going to revisit the p20 again once i finish my test, as i was positive the train ended up being 245m to fit but i could be talking rubbish, i shall find out. I solved it be doing a far end +15 on the stop which means signalled through the platform where he stops and detatches a front portion.

                  Blessed are the true believers, for only they shall walk the Path, and they shall be welcomed unto the realm of the Ori and made as one with Them.
                  Log in to reply
                  Minor Edinburgh Niggles 02/07/2011 at 08:54 #17128
                  Peter Bennet
                  Avatar
                  5402 posts
                  You've not said what length you were originally trying but I've just tested (current build) and it appears trains are stopping short of the signal by 20m (not 9m as I'd thought) so a 275m train should fit OK.

                  It is possible that the lengths were wrong in the release version.

                  Peter

                  EDIT- gone back to 2009 data and no apparent anomalies in lengths found.

                  I identify as half man half biscuit - crumbs!
                  Log in to reply
                  Minor Edinburgh Niggles 02/07/2011 at 09:28 #17135
                  AndyG
                  Avatar
                  1842 posts
                  If it helps for a work-around, a train with a default 'far end' stop will stop 20m shy of the signal, but a 'far end exact' will force the train to within 1m of the signal.

                  Another way is to use 'near end', which should ensure the (rear of the) train fits in even if it has to get closer to the signal than the 20m 'viewing' distance.

                  I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either.
                  Log in to reply