Page 1 of 2
Timetable 2013 for version 3 Carlisle sim. 24/12/2013 at 14:13 #53156 | |
woodruff
204 posts |
Timetable for Carlisle [version 3 sim], submitted for approval. Timetable is for the 28th November 2013. Please post any errors or issues vie this topic. Enjoy and merry x mass. Log in to reply The following users said thank you: tjfrancis, John, duncan89 |
Timetable 2013 for version 3 Carlisle sim. 24/12/2013 at 14:18 #53157 | |
AndyG
1842 posts |
Carlisle 28 Nov 2013 WTT approved
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 24/12/2013 at 15:06 #53158 | |
tjfrancis
359 posts |
hi woodruff got the timetable likening. I got two seed trains one going at26mph the id is 6e841. the other train is going at 10 mph id is 4s471. the other trains are fine so far do you have any ideas why. well done for a good tt so far I am dyslexic so please consider this when reading my posts Last edited: 24/12/2013 at 15:14 by tjfrancis Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 24/12/2013 at 15:46 #53162 | |
woodruff
204 posts |
Yes noticed this when I tested that the seed trains take a bit to speed up ! Think it might be due to the gradients on the sim ,as the seeds start on the uphill section.
Log in to reply The following user said thank you: tjfrancis |
Timetable 2013 for version 3 Carlisle sim. 24/12/2013 at 17:45 #53166 | |
tjfrancis
359 posts |
ok thanks
I am dyslexic so please consider this when reading my posts Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 26/12/2013 at 22:53 #53244 | |
Stanyon
141 posts |
just to say the 5c92 preston - carlisle and returns worked by tpe were/are class 350 4 cars on hire from london midland on driver training (now there own on test) runs not 185's hope this helps
Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 26/12/2013 at 23:05 #53245 | |
Stanyon
141 posts |
also when a train re-enters on the down goods from the yard after already coming down from the north, it shows twice about re-entry.
Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 27/12/2013 at 11:09 #53256 | |
woodruff
204 posts |
Thanks for the tip. I went off the nr wtt. Should have realised from all the "tweets" from Northern trains!
Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 27/12/2013 at 11:11 #53257 | |
woodruff
204 posts |
Just to check is this the sim message or the train entering twice? If it is the sim message I had that happen when I tested but thought it was a setting I had on the F3 options screen. I will check out when I finish messing with the new SimSig loader.
Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 27/12/2013 at 16:27 #53262 | |
postal
5264 posts |
" said:Just to check is this the sim message or the train entering twice? If it is the sim message I had that happen when I tested but thought it was a setting I had on the F3 options screen. I will check out when I finish messing with the new SimSig loader.It's a known bug which will be fixed if/when Carlisle is re-released. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 30/12/2013 at 11:16 #53419 | |
uboat
219 posts |
I think some rules could be added. eg i had 6C272 exiting Tebay siding while 6C271 was trying to enter. i had a 4Sxx2 come out of Carlisle yard before 4Sxx1 went in. Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 30/12/2013 at 15:33 #53436 | |
john havenhand
58 posts |
2 so far 6c27 should just run around at Tebay loop rather than CE 1E23 goes ECS to collier Lane sidings to allow 2H89 to arrive and depart also 1S55s booked stop at Carlisle isnt shown
Last edited: 30/12/2013 at 15:33 by john havenhand Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 30/12/2013 at 15:37 #53437 | |
woodruff
204 posts |
Thank you for the info ubout, There are rules but most were put into place for the trains entering Carlisle yard. Might have missed some off the list I had, but will update for the next version.
Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 30/12/2013 at 19:23 #53455 | |
woodruff
204 posts |
Had a problem with 6C27 as I could not get it to use the DGL at Tebay to run around its train. So easiest way was for it to run in to the ce sidings and then re appear.
Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 03/01/2014 at 19:31 #53563 | |
john havenhand
58 posts |
Completed the sim bar ones already reported all no other problems there is a Newcastle - Whitehaven service which didnt show up but this often gets cancelled at carlisle
Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 03/01/2014 at 20:02 #53567 | |
woodruff
204 posts |
Thank you for the feed back john. As you have completed, is there any thing that you think was missing or could have been added or done better?
Last edited: 03/01/2014 at 20:03 by woodruff Reason: typing error Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 05/01/2014 at 11:27 #53591 | |
john havenhand
58 posts |
I got so far with a sunday timetable but never got it finished going to do one complete with pocession trains for today when I get time
Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 06/01/2014 at 07:04 #53604 | |
chrisdmadd
242 posts |
One problem I'm having which I presume is a sim error rather then TT error is when I'm sending trains towards Wigton they are just stopping there and a message displaying 'no more timetabled trips' I just shunt them forward and they disappear. I'm only up to 6am and I think I've only sent two up there but could be quite annoying later in the game! Really enjoying it so far though. Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 06/01/2014 at 09:34 #53605 | |
postal
5264 posts |
" said:One problem I'm having which I presume is a sim error rather then TT error is when I'm sending trains towards Wigton they are just stopping there and a message displaying 'no more timetabled trips' I just shunt them forward and they disappear. I'm only up to 6am and I think I've only sent two up there but could be quite annoying later in the game!From the Sim Manual available on the Wiki: "Known Bugs Trains not leaving sim at Wigton Trains leaving the sim on the Up M&C fail to exit the sim at Wigton. F2 shows as “no more timetabled trips”. The workround is to use F2 to abandon the trains timetable after which is proceeds forward and exits the sim." “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply The following user said thank you: chrisdmadd |
Timetable 2013 for version 3 Carlisle sim. 06/01/2014 at 19:38 #53625 | |
chrisdmadd
242 posts |
I must have read the manual 10 times aswell! Thanks Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 06/01/2014 at 22:23 #53631 | |
woodruff
204 posts |
Hi chrismadd when you have copmpleted can you give some feed back on what was good and what was not so good on the tt for me?
Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 10/01/2014 at 06:21 #53734 | |
BarryM
2158 posts |
" said:Thank you for the feed back john. As you have completed, is there any thing that you think was missing or could have been added or done better?Steven, when writing a timetable, you need to take into consideration the intermediate stations/locations that a train passes so as to identify the true locations of trains in the Train List (F2). F2 will only show a train's Current/Prev Location that appears in its timetable. Example, In your current timetable, 1S35 is approaching Penrith on the down whilst F2 shows the train at Tebay. The train having gone through Shap Summit, Harrisons Sidings and Eden Vale. All crossing loops need to be shown. This information is needed when a person hosts a session. Keep up the good work. Barry Barry, Sydney, New South Wales, Australia Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 10/01/2014 at 16:10 #53750 | |
woodruff
204 posts |
Thank you for the info Barry M. When I tested I did wonder why the trains seemed to lag! Now I understand why.
Log in to reply |
Timetable 2013 for version 3 Carlisle sim. 10/01/2014 at 18:08 #53763 | |
Sacro
1171 posts |
" said:" said:You don't need to take intermediate timing points into consideration unless they are defined as mandatory (or a train is booked to do something there).Thank you for the feed back john. As you have completed, is there any thing that you think was missing or could have been added or done better?Steven, when writing a timetable, you need to take into consideration the intermediate stations/locations that a train passes so as to identify the true locations of trains in the Train List (F2). F2 will only show a train's Current/Prev Location that appears in its timetable. Example, In your current timetable, 1S35 is approaching Penrith on the down whilst F2 shows the train at Tebay. The train having gone through Shap Summit, Harrisons Sidings and Eden Vale. All crossing loops need to be shown. This information is needed when a person hosts a session. There are no mandatory timing points between Penrith and Tebay so unless a train is booked into one of the loops it won't be timed there. Log in to reply The following user said thank you: woodruff |
Timetable 2013 for version 3 Carlisle sim. 11/01/2014 at 00:37 #53779 | |
RainbowNines
272 posts |
Apologies if this has already been mentioned - 1S26 is the Lowland Sleeper but you've set it as an 11-car 390 - causes it to arrive fifteen minutes early to Carlisle! (I understand early running tends to happen with the sleeper anyway, but point still stands). Great TT. Thanks for your hard work. Log in to reply The following user said thank you: woodruff |