Page 1 of 1
| Wishaw - Shieldmuir Crossing 02/03/2014 at 14:40 #56443 | |
LucasLCC
94 posts |
Hi, So running the standard timetable (Motherwell August 2006 v4.1.0 (0445 start)), I've come across a little bit of a issue. 0H03 has come across a little bit of a issue. Due to signalman error, I send it through Holytown and onto Wishaw, before realising that I had no way of getting it across to the Down Passenger Line to join with 5H03. A slight issue. My solution was to try and reverse it down the Shieldmuir line and onto the Down Main, where it could then be reversed at Shieldmuir and continue with it's normal route. So 0H03 was signaled up to signal M520, and stopped at the red aspect correctly. I then set the route across from M515 to M475 across the crossover. The route cleared correctly as far as I can tell, and the shunt signal was off. 0H03 was reversed, and proceeded up to M515 signal, before stopping and complaining that it was at a buffer stop. There is obviously no buffer at this location, as that could be a slight issue. Screenshot as follows: [img size=600]http://i.imgur.com/Qg2qUrD.jpg[/img] Also included the save file should it be of use. Cheers, Lucas Post has attachments. Log in to view them. Last edited: 02/03/2014 at 14:42 by LucasLCC Log in to reply The following user said thank you: Late Turn |
| Wishaw - Shieldmuir Crossing 02/03/2014 at 16:23 #56444 | |
Peter Bennet
5402 posts |
For some reason it's gone into the 1980's siding. I think it's because there is no route strip to follow so it goes the line of least resistance. I need to block. If you f2 tell it to stop earlier, at the station then it should have been OK. Peter I identify as half man half biscuit - crumbs! Log in to reply |