Page 1 of 1
Era difficulty 26/03/2015 at 03:32 #70276 | |
Nutter
![]() 83 posts |
Thank you for an amazing sim, one of those missing jigsaw pieses. One possible anomaly I have found is that I can't select era 2006 onwards, it loads up as 2000, with the line speed on the mains south of Winchor Junction being 90 (I believe they are 125 - at least in places) There is only mention in the wiki of 1980s and 2000, both 1980 (pre 1999) and 2000 seem to be presenting fine. Thank you again for all your hard work Mark Log in to reply |
Era difficulty 26/03/2015 at 04:12 #70280 | |
jc92
![]() 3649 posts |
in Pre 1999 there is no path found between Sinfin North and Peartree including when you use Melbourne Jct.
"We don't stop camborne wednesdays" Log in to reply |
Era difficulty 26/03/2015 at 16:32 #70303 | |
58050
![]() 2652 posts |
Further to the above posts another route which won't validate in the pre-1999 era mode is anything running Down from North Staffs Jn to Derby & then through via the 'TL' due to missing path between LNW Jn Derby & location Derby London Rd Jn. The 1st northbound freight in the 1987 WTT is 7E95 MGR from Oakdale Colliery - Scunthorpe BSC CHP which is booked to stand at London Road Jn from 00*19 - 00*38 before moving onto the 'TL' for a 2 minute crew change 00C42 - 00C44. I suspect there's going to be alot of this.
Log in to reply |
Era difficulty 26/03/2015 at 18:26 #70311 | |
Steamer
![]() 3958 posts |
Possibly relating to Nutter's issue, there's a cosmetic problem with the eras: the eras shown in the 'Settings' box near Kingsbury Jn don't correspond to those selected on start-up. Pre-1999 is shown as 1980, and both 2000-2005 and 2006 onwards are shown as 2000. I still get three different layouts, the text just needs correcting.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 26/03/2015 at 18:26 by Steamer Log in to reply |
Era difficulty 26/03/2015 at 20:30 #70324 | |
58050
![]() 2652 posts |
I've had to abandon writing Derby summer 1987 tt as there are a few locations missing in the locations list at Coalville. EG: Coalville LHS & Coalville Marcrofts. The entrance/exit to Marcrofts was where ML11 GPS is.![]() This photo shows the walkway from Coalville signing on point on the right to the signalbox on the left. To the left of the Cl.58 is a pair of Cl.20s & Marcrofts wagon repair depot was on the left of the Cl.20s in this photo. Photo taken in 1987. ![]() This is the private diesel shunter used at Marcrofts facility at Coalville. Also there needs to be a location ML5(rev) required to allow LD movements on & off the LHS which is also missing. Post has attachments. Log in to view them. Log in to reply |
Era difficulty 28/03/2015 at 09:34 #70422 | |
derbybest
![]() 274 posts |
I have found a quick fix for this although not ideal. If you DELETE Peartree from the timetable the route becomes valid
Log in to reply |
Era difficulty 28/03/2015 at 13:26 #70434 | |
derbybest
![]() 274 posts |
Also i have found is in the pre 1999 mode St Mary's Yard is not on the sim and also there is no entry point for Willington PS and no route available from Willington PS to Stenson Jcn.
Log in to reply |
Era difficulty 28/03/2015 at 17:20 #70448 | |
Phil-jmw
![]() 674 posts |
In the Pre-1999 era Thomas Hill's Ground Frame and siding off the Up Goods at St Mary's are missing. Scrap trains were still calling there in the early-mid 90's, although I can't remember when this traffic ceased or when the connection was removed. Phil. Log in to reply |
Era difficulty 28/03/2015 at 19:01 #70461 | |
jc92
![]() 3649 posts |
" said:Also i have found is in the pre 1999 mode St Mary's Yard is not on the sim and also there is no entry point for Willington PS and no route available from Willington PS to Stenson Jcn.Willington P.S. sidings? "We don't stop camborne wednesdays" Log in to reply The following user said thank you: derbybest |
Era difficulty 28/03/2015 at 20:00 #70464 | |
jc92
![]() 3649 posts |
theres no path available from Derby 4 shed to derby and vice versa.
"We don't stop camborne wednesdays" Log in to reply |
Era difficulty 28/03/2015 at 22:36 #70473 | |
TomOF
![]() 452 posts |
" said:theres no path available from Derby 4 shed to derby and vice versa. Wouldn't that require a reversal? Log in to reply |
Era difficulty 28/03/2015 at 22:51 #70476 | |
AndyG
![]() 1842 posts |
Entry Derby Loco Sidings (aka #4 shed) -> Chadeston Curve -> Derby and v/v appear to validate OK in 1990 era.
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Last edited: 28/03/2015 at 22:52 by AndyG Reason: typo Log in to reply |
Era difficulty 28/03/2015 at 23:29 #70478 | |
Danny252
![]() 1461 posts |
Isn't S476 on the Pilot Line part of "Derby"? I certainly can't find any other location that matches it.
Log in to reply |
Era difficulty 29/03/2015 at 08:45 #70483 | |
jc92
![]() 3649 posts |
" said:" said:I want to send a pilot from the LHS to litchurch lane. This requires a reversal on the pilot line which i would expect to report as location derby.theres no path available from Derby 4 shed to derby and vice versa. "We don't stop camborne wednesdays" Log in to reply |
Era difficulty 29/03/2015 at 18:14 #70503 | |
jc92
![]() 3649 posts |
Another thought - I'm sure the line to Denby must have been OTW or OTW with staff or similar given the length of the branch?
"We don't stop camborne wednesdays" Log in to reply |
Era difficulty 29/03/2015 at 18:44 #70508 | |
LucasLCC
![]() 94 posts |
Can't seem to get from Bardon Hill to Lounge Junction. Am I missing something?
Log in to reply |
Era difficulty 29/03/2015 at 22:24 #70524 | |
Phil-jmw
![]() 674 posts |
" said:" said:Joe," said:I want to send a pilot from the LHS to litchurch lane. This requires a reversal on the pilot line which i would expect to report as location derby.theres no path available from Derby 4 shed to derby and vice versa. To get from 4 Shed to Litchurch Lane you need to reverse on Chad Curve, not the Pilot line. There is no route from the Pilot Line to Lit Lane. The Denby Branch was worked by a train staff released from an instrument by the driver on the branch end at Little Eaton Jn. If memory serves it required track circuit occupation on the branch to obtain a release. Regards, Phil. Last edited: 29/03/2015 at 22:26 by Phil-jmw Log in to reply |