Page 1 of 1
| Dalston Carlisle Oil depot 24/01/2017 at 01:12 #91737 | |
Tony Gardner
11 posts |
I have downloaded the Dalston Oil terminal tutorial and I have managed to link it into the Carlisle sim. However, I cannot now find the tutorial again to look at the scenario instructions. I am fine with the Ground Frames and the panel which appears on the extreme right of the main panel. I have managed also to reverse the train onto the down platform, but I am now at a loss as to where the train should go and how it will get there. Just as an aside, I am using Version 3,238.2.0 Carlisle 11-10-14 1980's and when I load this timetable I receive the "Warning: Timetable may not be compatible with this scenario. Continue anyway?" Any help would be appreciated. Great simulations by the way. Thanks Tony Gardner Log in to reply |
| Dalston Carlisle Oil depot 24/01/2017 at 14:53 #91751 | |
Steamer
3984 posts |
Tony Gardner in post 91737 said:I have downloaded the Dalston Oil terminal tutorial and I have managed to link it into the Carlisle sim. However, I cannot now find the tutorial again to look at the scenario instructions. I am fine with the Ground Frames and the panel which appears on the extreme right of the main panel. I have managed also to reverse the train onto the down platform, but I am now at a loss as to where the train should go and how it will get there.Provided the train is fully on the Down line and you've reset all the ground frames to the 'Normal' position, it should continue back to Carlisle as per its timetable like any other train. Tony Gardner said: Just as an aside, I am using Version 3,238.2.0 Carlisle 11-10-14 1980's and when I load this timetable I receive the "Warning: Timetable may not be compatible with this scenario. Continue anyway?"If you're using a timetable set in 2014, the simulation should be running in 2000s mode, not 1980s mode. You'll probably get away with it for most trains, but trains to/from Carlisle Yard might cause problems. It's also possible that speed limits are different between the two eras, so trains might not be able to keep to time. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 24/01/2017 at 14:53 by Steamer Reason: . Log in to reply |
| Dalston Carlisle Oil depot 24/01/2017 at 16:00 #91755 | |
postal
5264 posts |
Steamer in post 91751 said:Provided the train is fully on the Down line and you've reset all the ground frames to the 'Normal' position, it should continue back to Carlisle as per its timetable like any other train.Depends on the TT. The Oil Terminal is single ended and there is no RR facility so IRL I think that the train sits on the Down Line while the loco hooks off from the Wigton end, crosses to the Up and than back over the North GF to rejoin and draw the train to Kingmoor Yard. There may be a RR move in the TT which is muddying the waters. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Dalston Carlisle Oil depot 24/01/2017 at 16:45 #91756 | |
|
Steamer
3984 posts |
postal in post 91755 said:Steamer in post 91751 said:Fairly sure that's what happens in real life, but I don't think running round at Dalston is possible in the (currently available) simulation.Provided the train is fully on the Down line and you've reset all the ground frames to the 'Normal' position, it should continue back to Carlisle as per its timetable like any other train.Depends on the TT. The Oil Terminal is single ended and there is no RR facility so IRL I think that the train sits on the Down Line while the loco hooks off from the Wigton end, crosses to the Up and than back over the North GF to rejoin and draw the train to Kingmoor Yard. There may be a RR move in the TT which is muddying the waters. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |