Page 1 of 1
| Cross Panel route A 24/03/2017 at 11:54 #94064 | |
MarkC
1105 posts |
I am on Cardiff 1.0.4 and latest loader 4.5.15 I just sent a train from Taff to West Via route 'A' the train TD initially show on the West panel, but once the train has left Taff and gone on to the West panel on the relief line the TD disappears and is replaced down the road with *X** I do not belive it is a TT issue but I am using "Cardiff SO 21 11 2015 0400 Start" and the train involved was 3S59. Other cross panel routes I have used the TD steps along with the movement of the train. And having looked at the other threads in the Cardiff board I have not seen this mentioned, nor is it mentioned as an exception in wiki. Log in to reply |
| Cross Panel route A 24/03/2017 at 15:55 #94072 | |
|
Stephen Fulcher
2078 posts |
When routed from Platform 7 (Signal C455) to Signal C127 on the Up Relief the TD confirmed not stepping - logged on Mantis 17094. Works correctly from Platform 6 (Signal C425). Log in to reply The following user said thank you: MarkC |
| Cross Panel route A 24/03/2017 at 18:31 #94081 | |
headshot119
4869 posts |
Fixed in version 1.0.5 (Press check for updates)
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: MarkC |
| Cross Panel route A 24/03/2017 at 21:59 #94084 | |
JohnMiller
321 posts |
Try as I have, I cannot get signal 323 on the TAFF panel to clear when the routes set to line `C` I have tried the pressing request on Taff & click the flashing requested on the west panel but nothing happens, whats the correct procedure please
Log in to reply |
| Cross Panel route A 24/03/2017 at 22:02 #94085 | |
|
headshot119
4869 posts |
JohnMiller in post 94084 said:Try as I have, I cannot get signal 323 on the TAFF panel to clear when the routes set to line `C` I have tried the pressing request on Taff & click the flashing requested on the west panel but nothing happens, whats the correct procedure pleaseJohn where are you trying to set a route to? You only need to slot to route back onto the Taf panel. If you are just routing to the West the half route on West needs setting as well. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Cross Panel route A 24/03/2017 at 22:04 #94086 | |
|
MarkC
1105 posts |
JohnMiller in post 94084 said:Try as I have, I cannot get signal 323 on the TAFF panel to clear when the routes set to line `C` I have tried the pressing request on Taff & click the flashing requested on the west panel but nothing happens, whats the correct procedure pleaseThe cross panel routes are operated by both Taff and West panels, Taff sets half the route and West compleates the route or vice versa. The Cardiff wiki page may be of help. And also a youtube video was made to help explain its working's Log in to reply |
| Cross Panel route A 24/03/2017 at 22:07 #94087 | |
|
JohnMiller
321 posts |
mark265 in post 94086 said:JohnMiller in post 94084 said:I set the route from 323 onto line C on taff panel then from line C to line B on the west panel but 323 does not clearTry as I have, I cannot get signal 323 on the TAFF panel to clear when the routes set to line `C` I have tried the pressing request on Taff & click the flashing requested on the west panel but nothing happens, whats the correct procedure pleaseThe cross panel routes are operated by both Taff and West panels, Taff sets half the route and West compleates the route or vice versa. Log in to reply |
| Cross Panel route A 24/03/2017 at 22:12 #94088 | |
|
MarkC
1105 posts |
JohnMiller in post 94087 said:mark265 in post 94086 said:I would advise to watch the Youtube video,JohnMiller in post 94084 said:I set the route from 323 onto line C on taff panel then from line C to line B on the west panel but 323 does not clearTry as I have, I cannot get signal 323 on the TAFF panel to clear when the routes set to line `C` I have tried the pressing request on Taff & click the flashing requested on the west panel but nothing happens, whats the correct procedure pleaseThe cross panel routes are operated by both Taff and West panels, Taff sets half the route and West compleates the route or vice versa. But if I interpret you correctly you are trying to go to P6 or 7 at Cardiff After you have gone from line C to B you need to go back on to Taff and set the route from B to the platform signal Log in to reply |
| Cross Panel route A 24/03/2017 at 22:37 #94089 | |
Steamer
3984 posts |
JohnMiller in post 94087 said:mark265 in post 94086 said:Either set the route 323-> line C on Taff, Line C-> Line B on West, then Line B-> 425 or 455 on Taff.JohnMiller in post 94084 said:I set the route from 323 onto line C on taff panel then from line C to line B on the west panel but 323 does not clearTry as I have, I cannot get signal 323 on the TAFF panel to clear when the routes set to line `C` I have tried the pressing request on Taff & click the flashing requested on the west panel but nothing happens, whats the correct procedure pleaseThe cross panel routes are operated by both Taff and West panels, Taff sets half the route and West compleates the route or vice versa. Alternately, grant the slot on West and set the route directly from 323 to 425 or 455 on Taff. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following user said thank you: JohnMiller |
| Cross Panel route A 24/03/2017 at 22:37 #94090 | |
|
headshot119
4869 posts |
Grant the slot on the West. Click 323 then click 425. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: JohnMiller |
| Cross Panel route A 24/03/2017 at 22:38 #94091 | |
Splodge
717 posts |
I have had a problem where a route set from 412 to 414 (I think) has prevented the route from being set correctly - the slot can be given but the route won't fill and it is not possible to 'complete' it using the arrow buttons. Inevitably I now can't replicate it; it seemed to depend on the signals set and positions of trains within Queen St platforms 6 and 7.
There's the right way, the wrong way and the railway. Log in to reply |