Page 1 of 2
| V4.3.1 02/03/2018 at 08:19 #106302 | |
Peter Bennet
5402 posts |
There should shortly be an update released (4.3.1). Users should be aware that there are a couple of significant changes which have required the timetable to be amended. The problem related to ARS and the way I'd coded the paths which, for some reason, no longer worked as previously. I just alert you this fact as it will mean existing saved games and timetables will not work out of the box. They should be able to be edited to make them compatible once loaded. The two main changes are to add in specific reversing locations for ECS in Whifflet loops and behind 405 at Motherwell, and a minor change in Dalzell loop. John (Postal) has kindly amended the 2006 timetables and also made some recasting and added-in the crew change stops. These will be V4.4.1 timetables and will be available through updates. Note that the analyser does throw up some warnings but, subject to confirmation, we think that they are the result of zealotry on the part of the analyser rather than something that need concern us. Peter I identify as half man half biscuit - crumbs! Last edited: 02/03/2018 at 08:20 by Peter Bennet Reason: None given Log in to reply The following users said thank you: Hap, HST125Scorton, BarryM |
| V4.3.1 02/03/2018 at 09:36 #106303 | |
postal
5265 posts 
|
To amplify what Peter has said, the 2006 TTs have been revised following lengthy study of the WTTs for the year. The changes of substance are the inclusion of crew changes where the data is shown in the WTT and adjustment of several of the Class 1 TTs to make some stops set-down only in the Simsig TT where they are shown in the WTTs (mainly at Motherwell and Carstairs). The TTs have had over 100 hours of testing so I am hopeful that the errors have been minimised but it is a manually entered TT so there will still be some typos or errors. Please report them here so that remedial action can be taken. Finally, as Peter notes the TT analyser is showing 17 warnings. 16 of these refer to crew changes which are booked at the likes of Bellshill and Holytown. Now that the crew changes are an action in the TT the analyser is reporting that it is unsafe to have actions at the relevant locations because they are not set up by the developer as key locations. Peter is aware but the amount of work to change these locations to key locations would be substantial and the warnings make no difference to the operation of the sim/TT. The 17th. warning refers to the morning Pendolino working to Edinburgh to form an Edinburgh - Euston service. This runs as an ECS working from Polmadie to Carstairs (5B11) where it forms 1B11, Carstairs - Edinburgh. There are 2 incarnations of 5B11 in the TT as there are two paths in the WTT depending on whether the set needs to be turned to put the first class at the rear from Carstairs. 5B11-A and 5B11-B both have an action of N 1B11. The analyser takes offence at this and complains that when it gets to 5B11-B, 1B11 has already been used for 5B11-A. Again no impact on the operation of the sim/TT. Hope you enjoy when the re-release is pushed out. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 02/03/2018 at 09:36 by postal Reason: None given Log in to reply The following users said thank you: BarryM, MarkC, Hap, Ardmaraig |
| V4.3.1 02/03/2018 at 10:05 #106304 | |
Ray
211 posts
|
I hope this update sorts out the 2EXX services which turnback at Newton. After the service has left the turnback and sits on the platform 1 at Newton, it wants to go in the wrong direction. All the 2Exx services want to do that and there are a lot of them. I refer to the Motherwell 1984 timetable (set correctly in the 1980 era).
Log in to reply |
| V4.3.1 02/03/2018 at 11:31 #106306 | |
|
Peter Bennet
5402 posts |
Ray in post 106304 said:I hope this update sorts out the 2EXX services which turnback at Newton. After the service has left the turnback and sits on the platform 1 at Newton, it wants to go in the wrong direction. All the 2Exx services want to do that and there are a lot of them. I refer to the Motherwell 1984 timetable (set correctly in the 1980 era).Can you point me in the direction of the report so I can remind myself? Peter I identify as half man half biscuit - crumbs! Log in to reply |
| V4.3.1 02/03/2018 at 12:07 #106307 | |
Hap
1039 posts
|
Thanks guys.
How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
| V4.3.1 02/03/2018 at 14:48 #106310 | |
|
Ray
211 posts
|
I hope this update sorts out the 2EXX services which turnback at Newton. After the service has left the turnback and sits on the platform 1 at Newton, it wants to go in the wrong direction. All the 2Exx services want to do that and there are a lot of them. I refer to the Motherwell 1984 timetable (set correctly in the 1980 era). Can you point me in the direction of the report so I can remind myself? This could be the report #105284 and the chain of messages after same. Log in to reply |
| V4.3.1 02/03/2018 at 20:17 #106320 | |
|
Peter Bennet
5402 posts |
Ray in post 106310 said:I hope this update sorts out the 2EXX services which turnback at Newton. After the service has left the turnback and sits on the platform 1 at Newton, it wants to go in the wrong direction. All the 2Exx services want to do that and there are a lot of them. I refer to the Motherwell 1984 timetable (set correctly in the 1980 era).No, that's to do with trains being misrouted as M138 so I can't see how it relates to this point. Peter I identify as half man half biscuit - crumbs! Log in to reply |
| V4.3.1 02/03/2018 at 20:36 #106323 | |
HST125Scorton
1191 posts |
Has this update been released yet? Not had anything come through since this post was started..
Aaron (AJRO) | Timetable Writer Log in to reply The following user said thank you: Hap |
| V4.3.1 02/03/2018 at 21:51 #106328 | |
|
y10g9
895 posts |
Peter Bennet in post 106302 said:There should shortly be an update released (4.3.1).Aka there is one on its way, but it will be with us when it’s ready Log in to reply The following users said thank you: Hap, Ar88 |
| V4.3.1 02/03/2018 at 22:05 #106331 | |
|
HST125Scorton
1191 posts |
A valid point, was been impatient that I didn't read the first post on this... I'll happily wait.
Aaron (AJRO) | Timetable Writer Log in to reply |
| V4.3.1 02/03/2018 at 22:06 #106332 | |
|
Peter Bennet
5402 posts |
I sent it to Karl last night. Peter I identify as half man half biscuit - crumbs! Log in to reply The following user said thank you: HST125Scorton |
| V4.3.1 02/03/2018 at 23:07 #106335 | |
headshot119
4869 posts |
Peter Bennet in post 106332 said:I sent it to Karl last night.I've been in Cornwall for most of the last 48 hours. As soon as I have internet better than a piece of string you'll have it. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: Hap |
| V4.3.1 02/03/2018 at 23:07 #106336 | |
|
headshot119
4869 posts |
Peter Bennet in post 106332 said:I sent it to Karl last night.I've been in Cornwall for most of the last 48 hours. As soon as I have internet better than a piece of string you'll have it. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following users said thank you: HST125Scorton, Peter Bennet |
| V4.3.1 04/03/2018 at 19:31 #106441 | |
|
headshot119
4869 posts |
Press check for updates and it will appear.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following users said thank you: HST125Scorton, Peter Bennet, BarryM |
| V4.3.1 04/03/2018 at 19:39 #106443 | |
|
HST125Scorton
1191 posts |
Thanks again Karl, sorry for been slightly impatience.
Aaron (AJRO) | Timetable Writer Log in to reply |
| V4.3.1 04/03/2018 at 19:43 #106444 | |
|
Hap
1039 posts
|
Just started the 2006 TT up. 1S03 waiting at law junction (For loop), given priority overlap to 6S54 which has just entered at Gretna... And again with 6S48 and 1S03. Post has attachments. Log in to view them. How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Last edited: 04/03/2018 at 19:50 by Hap Reason: None given Log in to reply |
| V4.3.1 04/03/2018 at 20:48 #106457 | |
|
postal
5265 posts
|
Hap in post 106444 said:Just started the 2006 TT up. 1S03 waiting at law junction (For loop), given priority overlap to 6S54 which has just entered at Gretna...Lots of ARS issues which have been reported and await resolution. Afraid you'll just have to work round them. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply The following user said thank you: Hap |
| V4.3.1 05/03/2018 at 11:17 #106476 | |
|
Hap
1039 posts
|
No worries, I thought this update was to fix that, hence reporting them again. :-) back to good old fashioned signalling...and a reinforced scroller on the mouse. Ha!
How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
| V4.3.1 05/03/2018 at 11:46 #106477 | |
Andrew G
552 posts |
Hap in post 106476 said:and a reinforced scroller on the mouse. Ha!Although it is a personal preference I find Hot Keys preferable to scrolling and Motherwell has Alpha & Numeric ones. Log in to reply |
| V4.3.1 05/03/2018 at 13:00 #106479 | |
|
Hap
1039 posts
|
Andrew G in post 106477 said:Hap in post 106476 said:It’s just pure habit Andy. Though I am going to attempt to break it.and a reinforced scroller on the mouse. Ha!Although it is a personal preference I find Hot Keys preferable to scrolling and Motherwell has Alpha & Numeric ones. How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
| V4.3.1 05/03/2018 at 13:47 #106482 | |
|
postal
5265 posts
|
Andrew G in post 106477 said:Hap in post 106476 said:Might just be my system, but I can't be doing with the hot keys. The Motherwell diagram is taller than my screen so I run things with the main view manually maximised and scrolled down a few pixels so I can see what I need at the bottom of the screen. If I use a hot key I jump to the right place laterally but it scrolls the screen back to the top and I then have to scroll back down to get the screen in the right position for my needs. Drives me round the bend so I never use the hot keys.and a reinforced scroller on the mouse. Ha!Although it is a personal preference I find Hot Keys preferable to scrolling and Motherwell has Alpha & Numeric ones. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| V4.3.1 06/03/2018 at 01:03 #106492 | |
BarryM
2158 posts |
John, you need a 27 inch monitor. It fits the sims perfectly. No scrolling up & down. Cheers Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| V4.3.1 06/03/2018 at 09:54 #106493 | |
|
Danny252
1461 posts |
The physical size of a monitor does not correspond to a certain number of pixels (though there is presumably a correlation). Also, I doubt that most people aren't inclined to spend at least £100 just because Motherwell is a bit too tall! Last edited: 06/03/2018 at 09:54 by Danny252 Reason: None given Log in to reply |
| V4.3.1 06/03/2018 at 16:38 #106501 | |
|
Hap
1039 posts
|
I got two 22" TV's and planning on adding a 3rd next month  The only sims I need to scroll up and down on ever so slightly is New Street and Marylebone.
How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply |
| V4.3.1 07/03/2018 at 13:08 #106529 | |
Ar88
310 posts |
Danny252 in post 106493 said:The physical size of a monitor does not correspond to a certain number of pixels (though there is presumably a correlation).I find very-few people will spend that much merely for 1 simulation unless they're hardcore simulation players. That being said - I bought my 2 24" monitors purely for Simsig! The Welsh contingent. Aron, or Ar to mates. Also known as 88E or ThatManCalledAr. Log in to reply |