Page 1 of 1
| Loader V4.9 15/12/2018 at 06:39 #114004 | |
GeoffM
6376 posts |
As you may have noticed, Version 4.9 of the Loader is now available via Check For Updates. This has a quite large number of improvements, bug fixes, and new features, most of which are listed here. Some of the main features are: - Faster display of the simulation list when selecting a simulation (after an initial scan, so he 2nd Loader start onwards). If, for some reason, the list of simulations appears to be incomplete, pressing the new "Rescan" button will void the cache and iterate through your sims again. - For non-TORR sims, a spent route (used but not cancelled) will now show a flashing white signal post. Panels have various ways of showing this, so this is a one-size-fits-all solution. Note: sims need to be updated to take advantage of this feature. - Splitting overlap issues on Strathfield have been fixed - You can now interpose and cancel directly into queue berths (in most cases) - When two sims were chained, and a train was supposed to ACI on the second simulation after crossing from the first, a bug prevented this from happening but has now been fixed. Strathfield will be ready in a couple of days and fixes for a few other sims are being worked on. Thanks for the ongoing support. SimSig Boss Log in to reply The following users said thank you: sunocske, 9pN1SEAp, Meld, Redbusman, Edgemaster, BenWright, bossman, KymriskaDraken, snapscan, Lyn-Greenwood, JamesN, rodney30, tjfrancis, HST125Scorton, Soton_Speed, DaveHarries, Phil-jmw, VInce, agincourt13, flabberdacks, WesternChampion, phil1044, BarryM, Mikhail, ceefax |
| Loader V4.9 15/12/2018 at 15:11 #114017 | |
HST125Scorton
1191 posts |
Thanks for the new loader v4.9. After looking a the list and seeing this below, I was kind of happy in the hope that trains would enter ontime. 0021794: [Timetabling] Train entry and Shunt moves (clive) - resolved. Sadly they seem to be still a 1min delay from the timetable entry for my example 2N94 which enters at 00:04:00 instead enters at 00:05:01. I'm not 100% sure if this is what was fix above mentioned. Any ideas? I'm starting fresh sims instead of saved ones. Aaron (AJRO) | Timetable Writer Last edited: 15/12/2018 at 15:20 by headshot119 Reason: None given Log in to reply The following user said thank you: agincourt13 |
| Loader V4.9 15/12/2018 at 15:24 #114018 | |
headshot119
4869 posts |
21794 was unrelated to that issue. 13132 is the issue in question which is still under investigation "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: HST125Scorton |
| Loader V4.9 15/12/2018 at 15:54 #114019 | |
tynie123
234 posts |
Can I ask a daft question, as I have a lot of saved sims , what are the likely compatibility issues that I could come across. Or should I just start new ones?
Log in to reply |
| Loader V4.9 15/12/2018 at 16:17 #114021 | |
|
GeoffM
6376 posts |
tynie123 in post 114019 said:Can I ask a daft question, as I have a lot of saved sims , what are the likely compatibility issues that I could come across. Or should I just start new ones?Saves should be fine. But if you have a problem with one, let us know. SimSig Boss Log in to reply |
| Loader V4.9 15/12/2018 at 16:20 #114022 | |
|
tynie123
234 posts |
GeoffM in post 114021 said:tynie123 in post 114019 said:Can I ask a daft question, as I have a lot of saved sims , what are the likely compatibility issues that I could come across. Or should I just start new ones?Saves should be fine. But if you have a problem with one, let us know. Will do. I am going to start a few again, some I haven't used for a while. I need to play one at a time from start to finish. Cheers Log in to reply |
| Loader V4.9 15/12/2018 at 16:43 #114024 | |
|
HST125Scorton
1191 posts |
headshot119 in post 114018 said:21794 was unrelated to that issue.Ah thats the one.. I got mixed up then. Thanks Karl. Aaron (AJRO) | Timetable Writer Log in to reply |
| Loader V4.9 15/12/2018 at 20:26 #114030 | |
Peter Bennet
5402 posts |
GeoffM in post 114021 said:tynie123 in post 114019 said:It's sim updates that are more likely to cause problems with saved games.Can I ask a daft question, as I have a lot of saved sims , what are the likely compatibility issues that I could come across. Or should I just start new ones?Saves should be fine. But if you have a problem with one, let us know. Peter I identify as half man half biscuit - crumbs! Log in to reply The following user said thank you: tynie123 |
| Loader V4.9 17/12/2018 at 17:25 #114105 | |
|
tynie123
234 posts |
If I see an update I tend to start a new one. While I am on, are there any plans to update any of the Mac Sims. Glasgow to Edinburgh is now all electric. Wires are up to Dunblane and Alloa / Double line working to Dyce, and Borders line. Cheers and thanks for all the excellent work you all do. I would be lost without Sim Sig. Iain
Log in to reply |
| Loader V4.9 17/12/2018 at 17:33 #114106 | |
|
tynie123
234 posts |
GeoffM in post 114021 said:tynie123 in post 114019 said:Can I ask a daft question, as I have a lot of saved sims , what are the likely compatibility issues that I could come across. Or should I just start new ones?Saves should be fine. But if you have a problem with one, let us know. I am playing Tynside (brilliant) I am now getting services stopping at Darlington ( 1S12, 1S33 ) showing as giving way to 1S11, That is currently passing Killingworth LC. Log in to reply |
| Loader V4.9 17/12/2018 at 17:58 #114108 | |
Steamer
3985 posts |
tynie123 in post 114105 said:If I see an update I tend to start a new one. While I am on, are there any plans to update any of the Mac Sims. Glasgow to Edinburgh is now all electric. Wires are up to Dunblane and Alloa / Double line working to Dyce, and Borders line. Cheers and thanks for all the excellent work you all do. I would be lost without Sim Sig. IainThe 'EGIP' era in Central Scotland includes the new layout at Stirling and the new electrification; I don't know if any timetables have been written for that era yet though. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Loader V4.9 17/12/2018 at 19:35 #114110 | |
|
tynie123
234 posts |
Steamer in post 114108 said:tynie123 in post 114105 said:If I see an update I tend to start a new one. While I am on, are there any plans to update any of the Mac Sims. Glasgow to Edinburgh is now all electric. Wires are up to Dunblane and Alloa / Double line working to Dyce, and Borders line. Cheers and thanks for all the excellent work you all do. I would be lost without Sim Sig. IainThe 'EGIP' era in Central Scotland includes the new layout at Stirling and the new electrification; I don't know if any timetables have been written for that era yet though. Yip I passed there today .New signals etc. Timetables and rolling stock much changed. Passengers still not happy. Lots of staff shortages and now no direct train from Dunblane to Polmont , Linlithgow. Log in to reply |
| Loader V4.9 18/12/2018 at 09:32 #114136 | |
Jan
906 posts |
GeoffM in post 114004 said:- Faster display of the simulation list when selecting a simulation (after an initial scan, so he 2nd Loader start onwards). If, for some reason, the list of simulations appears to be incomplete, pressing the new "Rescan" button will void the cache and iterate through your sims again. I appreciate the effort and I see some speedup, but unfortunately it's still not superfast - previously, with a warm file system cache populating the full list of sims took around 8 s, whereas with the cached list it now still takes around 5 s. Two million people attempt to use Birmingham's magnificent rail network every year, with just over a million of them managing to get further than Smethwick. Log in to reply |
| Loader V4.9 18/12/2018 at 16:15 #114146 | |
Edgemaster
332 posts |
Jan in post 114136 said:GeoffM in post 114004 said:I'm seeing a significant improvement on linux, it previously took a very long time to scan through all the sim files.- Faster display of the simulation list when selecting a simulation (after an initial scan, so he 2nd Loader start onwards). If, for some reason, the list of simulations appears to be incomplete, pressing the new "Rescan" button will void the cache and iterate through your sims again. Log in to reply |
| Loader V4.9 18/12/2018 at 18:28 #114150 | |
|
greatkingrat
75 posts |
When I go to start a new simulation, there are no sims shown and a message box pops up with "I/O error 103". The same happens if I click on Rescan manually.
Log in to reply |
| Loader V4.9 02/01/2019 at 23:00 #114547 | |
BigJacko
5 posts |
I had the same problem. Turned out my simulations and timetables were all in my personal documents file (which wasn't on C:\Users\me\Documents\Simsig which would have been the default, because my docs file was redirected to another folder on my D drive). I uninstalled, and reinstalled v4.6.9 loader again and then moved the entire SimSig folder from my personal docs folder (all of which was still there, even after uninstallation) over to C:\Users\Public\Documents\SimSig instead, and then relaunched the launcher, told v4.6.9 to use the COMMON DOCUMENTS shortcut from the 'Use Folders' widget, moved it to the top, deselected my personal folder, then checked I could seem sims (attempted start, but didn't actually launch one - just checked I could see them listed). Then I did the update to v4.9, and all was well that time. I/O Error 103 I would therefore assume is a permissions error, and is related to the launcher being able to write to the personal docs folder by default. Hope this works for you. It is entirely possible you may be able to skip the rollback to 4.6.9, by just moving your files to the Public document, resetting the folders, and trying to launch again... Do let me know if this works! Cheers Log in to reply |
| Loader V4.9 03/01/2019 at 21:45 #114563 | |
|
greatkingrat
75 posts |
Yes, I have got it working now. I also had all my simulations saved in a non-default directory which seems to be the cause of the problem. Having played around a bit the issue seems to be the C:\Users\Public\Documents\Simsig directory which is the default location. If this directory does not exist it comes up with the IO error 103. If I create the directory manually it works normally (and creates a simulations.xml file with all the installed sims). Log in to reply |
| Loader V4.9 03/01/2019 at 22:32 #114564 | |
postal
5265 posts |
greatkingrat in post 114563 said:Yes, I have got it working now. I also had all my simulations saved in a non-default directory which seems to be the cause of the problem.I've also got everything SimSig in a bespoke location. I remember many moons ago just after the loader was first released I had to create the C:\Users\Public\Documents\Simsig directory manually as the loader needed a common.cfg file which had to live in that location. That file is still there and was last modified today when I closed down the SimSig session I had been running, I've now got the xml file as well which I can't remember seeing before. Is that file is part of the speeded up process for listing the sims available on the machine when starting a new sim? “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Loader V4.9 03/01/2019 at 22:37 #114565 | |
|
headshot119
4869 posts |
Yes it's a cache of all the Sims available.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: postal |
| Loader V4.9 19/01/2019 at 19:52 #114904 | |
jc92
3687 posts |
Regarding signal stems flashing when the route needs replacing. I have noticed this applies on colour lights but not semaphores. I can understand the reasoning but it does provide a weird situation where some signals on a panel have this feature and others dont
"We don't stop camborne wednesdays" Log in to reply |
| Loader V4.9 19/01/2019 at 20:03 #114906 | |
|
Noisynoel
989 posts |
jc92 in post 114904 said:Regarding signal stems flashing when the route needs replacing. I have noticed this applies on colour lights but not semaphores. I can understand the reasoning but it does provide a weird situation where some signals on a panel have this feature and others dontIt is down the the Developer to provide this functionality with semaphores. The sims I am working at the moment have it and Peak Forest is being "retro fitted" prior to a forthcoming update Noisynoel Log in to reply The following user said thank you: jc92 |