Page 1 of 1
| SHEFFIELD 2020 Timetable 09/06/2020 at 06:46 #127442 | |
BarryM
2158 posts |
I have attached a save involving 4 trains at Sheffield's Platform 1 namely 5R00 forming 2R00 and 2R02, and 1B61. 5R00 has not stopped correctly in P1A blocking 1B61 from leaving on the UP direction. 1B61 should fit in the TL clear of the points but does not. Looking at the puzzle, am I correct in saying that if the train lengths are correct then the track lengths are not according to those shown in Sheffield's manual? Barry Post has attachments. Log in to view them. Barry, Sydney, New South Wales, Australia Last edited: 09/06/2020 at 06:49 by BarryM Reason: None given Log in to reply |
| SHEFFIELD 2020 Timetable 09/06/2020 at 07:26 #127443 | |
jc92
3685 posts 
|
5R00 is overlength and really needs to be 2 seperate ECS workings from the holding sidings. I beleive Chris is aware that this issue and is currently updating the timetable
"We don't stop camborne wednesdays" Log in to reply The following user said thank you: BarryM |
| SHEFFIELD 2020 Timetable 10/06/2020 at 06:59 #127468 | |
Chrisrail
384 posts |
From the other Thread Update and thanks for your help and comments C92 the NT class 170s all seem to be described as 4 car sets but set as 2 car sets. all the NT sets are 3 car units. similarly TPE 185s are all described as 4 car however they are 3 car sets C DONE JC92 chris - 4E68 should seed at S405 in order to change crew at Masbro SS jcn - it currently seeds at masbro junction instead.# C DONE JC92 also none of the units seem to have dwell times for reversing. they ring out and move immediately when shunting round the station overnight. C DONE JC92 5N01 has a, typo and its TD has a O rather than a 0. C DONE JC92 up trains at barrow hill north junction seem to have 241 selected as their line code , causing them to be routed by the UDG rather than the up main. C Looking for an example(s) hotwellian Hi, enjoying this timetable. I have a query about 5R04. this enters from holding sidings then proceeds to U2B, which I assume is the same location as 2B va S80. There the display changes to 2R04 (away @ 06:05). the train list shows it as 5R04 (away @ 05:50 to S142). However 5S49 is due away from DSS at 04:33, so there appears to be a conflict here? Save attached. C DONE I believe JC92 I've had two 6J03's enter, both are Immingham - tinsley workings. C DONE peterb See attached save - standoff in Sheffield P1. 5R00 fouls the points between the sidings and 101 (too long for 1A?) which is an issue as 1B61 is booked via Dore. 2R00/2R02 can't go anywhere as both booked via Nunnery Jn. C WIP JC92 There's a lot of trains into 1A that foul the south end where they don't clear so far. Standage realistically is 3 vehicles. 4 at a push but northern don't like that. I think some of the ECS needs splitting into 2 workings. C WIP WDavy Having an issue at present with 5N05 & 2N00 which join in platform 5. 5N05 enters platform 5B ok but when 2N00 enters platform 5 there isn't enough room and the train extends out of platform 5 over the pointwork. I'm then having issues being able to allow the resulting 2N05 to leave the station as it just says the points are set against the train. I've tried telling 5N05 to shunt forward when it first arrives in the platform but it makes no difference. C WIP WDavy Something i've just found i have 7M19 come in from Doncaster and then shortly afterwards 7X19 also from Doncaster. Upon checking the timetables they are both exactly the same and are both also the same consist (Class 66 & 6 NRSC, What are NRSC?). C DONE WDavy 0Z89 Barrow Hill C Solution found to test WIP Log in to reply |
| SHEFFIELD 2020 Timetable 16/06/2020 at 01:47 #127595 | |
|
BarryM
2158 posts |
0E96 TT needs adjustment due to route Up Barrow Hill S248 to Up Sidings (North) not available? After Barrow Hill North Jn DM Add Barrow Hill REC SDGS Plat 1 Rev Next Barrow Hill SHUNT LINE Rev Leaving BARROW HILL UP SDGS 13:51 13:51 as last entry. Barry, Sydney, New South Wales, Australia Last edited: 16/06/2020 at 01:49 by BarryM Reason: None given Log in to reply |
| SHEFFIELD 2020 Timetable 16/06/2020 at 02:11 #127596 | |
|
BarryM
2158 posts |
0M62 and 6M03 have the same timetable leaving Sheffield at 12:45.
Barry, Sydney, New South Wales, Australia Log in to reply |
| SHEFFIELD 2020 Timetable 16/06/2020 at 02:55 #127597 | |
|
BarryM
2158 posts |
Does the timetable for locomotive 0Z90 at Barrow Hill Staveley Gds at 14:03 imply that the engine reveres before moving off?
Barry, Sydney, New South Wales, Australia Log in to reply |
| SHEFFIELD 2020 Timetable 17/06/2020 at 16:59 #127642 | |
|
Chrisrail
384 posts |
Thanks Barry All these have been rectified over the weekend. I will send you an updated copy. Sorry have been rather manic at work Chris Post has attachments. Log in to view them. Log in to reply The following users said thank you: Silverstar, BarryM |
| SHEFFIELD 2020 Timetable 26/06/2020 at 15:02 #128099 | |
|
Chrisrail
384 posts |
With the release of Loader v5.2 I am going to have to go through Sheffield again as some new features, moves etc have been added. Thanks for all the help testing using the old loader and I apologise for the delay.
Log in to reply |