Upcoming Games

(UTC times)


Full list
Add a game

Upcoming Events

No events to display

Who's Online

Person82, 442s3, andi, 0D07, jem771, Terry, rodney30, StephenB2988 (8 users seen recently)

PD20A uncontrollable

You are here: Home > Forum > Simulations > Released > Wigan Wallgate > PD20A uncontrollable

Page 1 of 1

PD20A uncontrollable 25/12/2020 at 10:18 #135260
grahamj42
Avatar
130 posts
PD20A is drawn as a distant in rear of a distant with an ERS, which seems a bit strange.

On startup, it briefly dispays a double-yellow before reverting to green.

Neither the ERS nor the Incident Control Panel "Hold at most restictive aspect" change the aspect (nor, in fact, does the passage of a train !).

Is there a module for an "automatic" gate box in Simsig which could be used at Chapel Lane?

(Lest I should seem ungrateful, many thanks to pedroathome and the rest of the team for this Christmas present !)

Log in to reply
PD20A uncontrollable 25/12/2020 at 10:29 #135261
headshot119
Avatar
4869 posts
Jsst a quick note to say yes it's to do with the gate box at Chapel Lane.

I'll provide a greater explanation post turkey.

"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer
Log in to reply
The following user said thank you: grahamj42
PD20A uncontrollable 25/12/2020 at 19:39 #135313
headshot119
Avatar
4869 posts
If you are running with "Show automatic signal aspects" turned on you will see that PD20A shows a double yellow and PD20B shows a single yellow unless PD19 and PD18 are cleared.

If you are running with "Show automatic signal aspects" turned off both PD20A and PD20B will show green, as they are showing "off" as far as the signaller at Parbold is concerned.

The ERS; which is simulated to allow the distant signals to be maintained at caution during a block failure, does replace both signals to there most restrictive aspect as far as Parbold box is concerned (YY - Y), and the drivers will react to that in the sim if defensive driving rules are programmed in. The brief glimpse of double yellow is the simulation working through the draw data to decide how to draw the signal on the screen.

In reality PD20B can in effect show red, yellow, green in semaphore form (Protecting Chapel Lane Crossing and acting as an inner distant for Parbold) and PD20A can show yellow, double yellow, or green (Acting as Chapel Lanes Distant and an outer distant for Parbold).

There is no core code module which could accurately represent the working of Chapel Lane as it works in reality, if in the future something is implemented then we can look at updating the simulation. Though I am reliably informed the crossing is only busy for the school run, the work run, and on bin day when the bin lorry turns up.

"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer
Last edited: 25/12/2020 at 19:45 by headshot119
Reason: Spelling

Log in to reply
The following user said thank you: grahamj42
PD20A uncontrollable 25/12/2020 at 19:51 #135314
Steamer
Avatar
3984 posts
headshot119 in post 135313 said:

In reality PD20B can in effect show red, yellow, green in semaphore form (Protecting Chapel Lane Crossing and acting as an inner distant for Parbold)
As shown on splash screen 105

"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q)
Log in to reply
The following user said thank you: headshot119
PD20A uncontrollable 25/12/2020 at 21:33 #135327
grahamj42
Avatar
130 posts
Karl, thanks for the clear explanation.

Quote:
If you are running with "Show automatic signal aspects" turned off both PD20A and PD20B will show green, as they are showing "off" as far as the signaller at Parbold is concerned.
The effect you describe is normally that of "Panel signals" and not "Show automatic signal aspects", which shows automatics as grey (or am I dreaming?).

Log in to reply
PD20A uncontrollable 25/12/2020 at 22:01 #135329
headshot119
Avatar
4869 posts
grahamj42 in post 135327 said:
Karl, thanks for the clear explanation.

Quote:
If you are running with "Show automatic signal aspects" turned off both PD20A and PD20B will show green, as they are showing "off" as far as the signaller at Parbold is concerned.
The effect you describe is normally that of "Panel signals" and not "Show automatic signal aspects", which shows automatics as grey (or am I dreaming?).
I've put the laptop away so I haven't got it to hand to confirm, but off the top of my head...

What we've simulated is a mix of a repeater signal; Parbold doesn't really care that one of them can show a red, and an automatic stop signal as it also protects the crossing at chapel lane. Custom draw data has been used to simulate what the Parbold Signaller would see rather than from the perspective of the crossing keeper at Chapel Lane. It's a mixture of automatic Signals and repeater Signals which leads to the affect as you allude.

Another similar situation will arise if the Cumbrian Coast is ever simulated. I don't sign that far down but I think that Limestone crossing box home is also the distant for silecroft on the down.

"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer
Last edited: 25/12/2020 at 22:03 by headshot119
Reason: Further explanation

Log in to reply