Page 1 of 2
Quandry at the Quarry 21/04/2021 at 06:39 #138854 | |
Chrisrail
![]() 384 posts |
Morning All I am currently doing a five day Leeds NW timetable and cannot seem to get my head round this problem, which may end up being a simple solution. Most of the trains that go up to the quarry at Rhylstone come back with the same consist (Class 66 + 27 HYA) which causes no problem as trains terminating at Rhylstone have to have next working input. However in the timetable for Week 1 I have 1. A Class 4 - 66 + 2 HYAs the locomotive returns as a class 6 + 27 HYA 2. Class 6 - 66 + 27 returns to Skipton as a Class 0 Light loco which then returns to Rhylstone as another Class 0 which then returns as a Class 66 + 27. I am either getting error messages saying train A not the same length as next working. I have tried using the "New Category" button in the Timetable editor but this does not seem to apply. I know I am using Leeds NW as an example but I am sure this happens on other Sims Any help would be gratefully received Log in to reply |
Quandry at the Quarry 21/04/2021 at 07:31 #138855 | |
Peter Bennet
![]() 5377 posts |
I think the problem might be that trains do not fall off the sim and re-enter. So, although the track is hidden it has to be treated the same as if it were wholly visible and the necessary joins/divides need to be made. If a train of Cl66 +2 enters and the 66 comes back as a LE then you need to do a divide at the end of the line and leave the wagons behind. If it comes back as +27 then that must mean the 27 wagons were already there from a previous working. From memory of a holiday in the area and having driven past the facility I think there were indeed sidings there so wagons could be stored. Although the line is OTW, if that is what happens in reality then there must be some way of "hiding" the wagons from the OTW controls. One way to facilitate this is for trains to fall off and re-enter, or to have some sort of control of the sidings. Peter I identify as half man half biscuit - crumbs! Log in to reply The following user said thank you: Chrisrail |
Quandry at the Quarry 21/04/2021 at 08:20 #138856 | |
postal
![]() 5216 posts |
Peter Bennet in post 138855 said:If a train of Cl66 +2 enters and the 66 comes back as a LE then you need to do a divide at the end of the line and leave the wagons behind.So for the purposes of a SimSig TT, unless there is a previous train in the TT which has left the 27 wagons it would require the seeding of an unpowered consist of 27 wagons at the quarry at the opening time of the TT (so more than one identical seed if there is more than one seed group in the TT) with a single location of the quarry then a Join action so the incoming loco and unpowered consist can form a happy union. I haven't got the sim open but wonder if that would affect any One Train Working constraints. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 21/04/2021 at 08:20 by postal Reason: None given Log in to reply |
Quandry at the Quarry 21/04/2021 at 08:39 #138857 | |
Meld
![]() 1108 posts |
Chris/John Had a quick play and see if this test TT can be refined. I had to talk the seed past red to get up the branch even though the route was set. Passed the age to be doing 'Spoon Feeding' !!! Log in to reply The following user said thank you: Chrisrail |
Quandry at the Quarry 21/04/2021 at 09:23 #138859 | |
Chrisrail
![]() 384 posts |
Thanks All I will have a look later. I was looking at seeding groups but not really having had to use them before I am not fully au fait with them. Day Off today so might have to re ponder this a bit later Maybe a Seeding Groups Guide for Dummies is in order Log in to reply |
Quandry at the Quarry 21/04/2021 at 10:03 #138862 | |
JamesN
![]() 1591 posts ![]() |
The branch is just coded as a dead-end single line in sim, however there is an extensive complex of sidings at the end in reality. It would be better as an entry/exit point given what goes down isn’t necessarily what comes back up; the only restriction in the sectional appendix being locomotives cannot be left down there, they have to return to Skipton as early as practical either with another train or light, to clear the one train working. Alas it’s far too long after the sim was developed to really seek to change that; it would break many released user contributed timetables and so forth. Log in to reply |
Quandry at the Quarry 21/04/2021 at 10:32 #138865 | |
Albert
![]() 1315 posts |
I would imagine it could be possible to retain the current TT location for trains simply turning back and add another TT location (like Rylstone Sidings or something like that) for trains to fall off the sim. Although it would probably mess up the OTW logic.
AJP in games Log in to reply |
Quandry at the Quarry 21/04/2021 at 10:39 #138867 | |
Peter Bennet
![]() 5377 posts |
postal in post 138856 said:Peter Bennet in post 138855 said:I guess so, I was just hypothesising on the principle at play.If a train of Cl66 +2 enters and the 66 comes back as a LE then you need to do a divide at the end of the line and leave the wagons behind.So for the purposes of a SimSig TT, unless there is a previous train in the TT which has left the 27 wagons it would require the seeding of an unpowered consist of 27 wagons at the quarry at the opening time of the TT (so more than one identical seed if there is more than one seed group in the TT) with a single location of the quarry then a Join action so the incoming loco and unpowered consist can form a happy union. It only affects OTW, where the trains don't fall-off. Edinburgh, for example, has some OTW where the trains fall-off and re-enter so the question of matching lengths is by-passed. Peter I identify as half man half biscuit - crumbs! Log in to reply |
Quandry at the Quarry 21/04/2021 at 11:06 #138870 | |
Meld
![]() 1108 posts |
Had another quick play and it is possible to seed empties at Ryleston leaving the OTW green to allow another train up the branch. The down side is that the inbound to Rylestone does need talking past at Skipton. Test TT re-attached (Tidied up the length mistakes) Post has attachments. Log in to view them. Passed the age to be doing 'Spoon Feeding' !!! Log in to reply |
Quandry at the Quarry 21/04/2021 at 11:37 #138872 | |
Chrisrail
![]() 384 posts |
I Think with all the help I might have sorted it......Time will tell In True SimSig fashion I will take the laptop to the pub and give it a run through. Many thanks Once again..............................If it doesnt work I maybe BACK Log in to reply |
Quandry at the Quarry 21/04/2021 at 11:45 #138873 | |
Chrisrail
![]() 384 posts |
Albert in post 138865 said:I would imagine it could be possible to retain the current TT location for trains simply turning back and add another TT location (like Rylstone Sidings or something like that) for trains to fall off the sim. Although it would probably mess up the OTW logic.In Theory as Rhylstone has three locations in the Sim - Rhylstone / Rhylstone Quarry / Rhylstone Tilcon you could run the train to one of them. However you still need to bring the loco back Log in to reply |
Quandry at the Quarry 21/04/2021 at 15:41 #138882 | |
GeoffM
![]() 6344 posts ![]() |
We were looking at Rhylstone as part of the update just a week or two ago. There are a number of sidings down there which means what goes up does not necessarily come down. Typically in such circumstances there'd be a gate or some other physical boundary to which the OTW applies, and no man's land beyond where you anything could happen (ie shunting) - but Rhylstone has nothing obvious from satellite views, though there could be a stop board not visible from overhead. The OTW is solely based on vehicles operating and clearing a sequence of tracks/treadles at the Skipton end (confirmed with interlocking data). Seeding at the "buffer" end should work and not affect the OTW (ie it would start green even with seeding). SimSig Boss Log in to reply |
Quandry at the Quarry 21/04/2021 at 16:33 #138884 | |
Albert
![]() 1315 posts |
But if you seed a train, that train in reality must've triggered the OTW when it went into Rylstone as James said you aren't allowed to drop off locos there.
AJP in games Log in to reply |
Quandry at the Quarry 21/04/2021 at 16:43 #138885 | |
GeoffM
![]() 6344 posts ![]() |
Albert in post 138884 said:But if you seed a train, that train in reality must've triggered the OTW when it went into Rylstone as James said you aren't allowed to drop off locos there.No, because the loco can arrive with wagons, drop off the wagons, then leave on its own. At that point there will be wagons in the sidings and the OTW will be green. That's why there would normally be a gate or some other dividing line to indicate to trains approaching the sidings that the definition of "line clear" [on the OTW section] is at an end, and they can expect wagons, points set against the train, or some other situation beyond the dividing line. OTW does not count axles in/out. SimSig Boss Last edited: 21/04/2021 at 16:44 by GeoffM Reason: None given Log in to reply |
Quandry at the Quarry 21/04/2021 at 16:48 #138887 | |
jc92
![]() 3649 posts ![]() |
GeoffM in post 138882 said:We were looking at Rhylstone as part of the update just a week or two ago. There are a number of sidings down there which means what goes up does not necessarily come down. Typically in such circumstances there'd be a gate or some other physical boundary to which the OTW applies, and no man's land beyond where you anything could happen (ie shunting) - but Rhylstone has nothing obvious from satellite views, though there could be a stop board not visible from overhead.Theres a commencement and end of OTW board at the end of the line but that's it. I dont know if its still the case but the quarry had a dedicated shunter as well historically. "We don't stop camborne wednesdays" Log in to reply |
Quandry at the Quarry 21/04/2021 at 16:53 #138888 | |
Albert
![]() 1315 posts |
@Geoff, I'm sorry for the confusion, I thought you were talking about seeding a train with loco on it. Seeding just wagons is fine of course in the scenario you described.
AJP in games Log in to reply |
Quandry at the Quarry 21/04/2021 at 16:58 #138892 | |
GeoffM
![]() 6344 posts ![]() |
jc92 in post 138887 said:GeoffM in post 138882 said:Streetview shows a shunting engine. Thanks for confirming the stopboard. We'd looked but couldn't locate it on satellite views.We were looking at Rhylstone as part of the update just a week or two ago. There are a number of sidings down there which means what goes up does not necessarily come down. Typically in such circumstances there'd be a gate or some other physical boundary to which the OTW applies, and no man's land beyond where you anything could happen (ie shunting) - but Rhylstone has nothing obvious from satellite views, though there could be a stop board not visible from overhead.Theres a commencement and end of OTW board at the end of the line but that's it. I dont know if its still the case but the quarry had a dedicated shunter as well historically. MELD has confirmed seeding will do what Chris wants; however, the signal L4042 at Skipton isn't showing a proceed aspect as it should do. I will fix that. SimSig Boss Log in to reply |
Quandry at the Quarry 21/04/2021 at 17:05 #138893 | |
Shwam3
![]() 11 posts |
The stop board for arrivals is here: https://goo.gl/maps/vJvepUaJNRqcPPjY8 A shunt limit board is then here: https://goo.gl/maps/g56Mw2KGd6Xys55j6 https://signalmaps.co.uk Log in to reply The following users said thank you: GeoffM, jc92 |
Quandry at the Quarry 21/04/2021 at 17:36 #138897 | |
GeoffM
![]() 6344 posts ![]() |
V1.6.1 pushed to updates.
SimSig Boss Log in to reply The following users said thank you: JamesN, Chrisrail |
Quandry at the Quarry 22/04/2021 at 08:05 #138915 | |
Chrisrail
![]() 384 posts |
Thanks for all that it saves me contacting the Network Rail Area Freight Manager for confirmation.
Log in to reply |
Quandry at the Quarry 22/04/2021 at 17:34 #138923 | |
postal
![]() 5216 posts |
Chrisrail in post 138859 said:Maybe a Seeding Groups Guide for Dummies is in orderDoes this page of the Wiki make any sense or does it just complicate matters? “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
Quandry at the Quarry 23/04/2021 at 08:36 #138936 | |
Chrisrail
![]() 384 posts |
postal in post 138923 said:Chrisrail in post 138859 said:Hi Postal It does a bit of both. Just need to sit down properly and mess with it. CheersMaybe a Seeding Groups Guide for Dummies is in orderDoes this page of the Wiki make any sense or does it just complicate matters? Log in to reply The following user said thank you: postal |
Quandry at the Quarry 24/04/2021 at 11:49 #139006 | |
Chrisrail
![]() 384 posts |
Thought Everything was going well, However on a Thursday and Friday I have two light locos going up to the Quarry to connect to Wagons. (The locos went up to the Quarry the night(s) before and obviously come down to Skipton to stable. A single train (loco) going up and connecting works fine but when I have 2 the wrong set of wagons are seeding at Rhylstone and the others will not seed because the track is occupied (WAG2 & WAG6). As mentioned before How big a job is it making Rhystone an entry / exit point? I appriciate that it would require a lot of legwork with previous timetables Log in to reply |
Quandry at the Quarry 24/04/2021 at 12:14 #139007 | |
Tempest Malice
![]() 122 posts |
Would the usual trick for seeding two trains at one seeding point of just seeding a combined train with a divide activity not work?
Log in to reply |
Quandry at the Quarry 24/04/2021 at 13:38 #139009 | |
postal
![]() 5216 posts |
Tempest Malice in post 139007 said:Would the usual trick for seeding two trains at one seeding point of just seeding a combined train with a divide activity not work?You might need a couple of tries while working out whether it is DF or DR to make sure that the second set out is at the buffer end but it doesn't take long to sort out. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply The following user said thank you: Chrisrail |