Page 1 of 1
| York North/South 25/09/2017 at 17:10 #101933 | |
keredsonej
16 posts |
I have recently purchased the York North/South sim and have been very happy with it. However, I have two questions and hope that someone will be able to help and make the sim much more enjoyable? 1/ How may I add sound for things such as the telephone, train entering the area and TRTS? I have downloaded some sounds as wav files and saved them in my Simsig folder but can't get them to work with the active simulation. 2/ Is there a file with the signal layout and numbers on? If so, where do I obtain it? Many thanks in advance for any help. Log in to reply |
| York North/South 25/09/2017 at 17:30 #101934 | |
Steamer
3985 posts |
keredsonej in post 101933 said:1/ How may I add sound for things such as the telephone, train entering the area and TRTS? I have downloaded some sounds as wav files and saved them in my Simsig folder but can't get them to work with the active simulation.F3 (Options), Messages tab. Select the message type from the drop-down list, use the '...' button to find the sound file you want, and click the 'play sound' box. See this Wiki page. Quote: 2/ Is there a file with the signal layout and numbers on? If so, where do I obtain it?Yes, it's linked to in the York manual, under 'Signal Number Plan'. Direct link to the PDF here: https://www.SimSig.co.uk/Media/Wiki/%2Fsimulations%2Fyork%2Fyork_signal_number_plan_rev1.pdf "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| York North/South 26/09/2017 at 17:22 #101949 | |
|
keredsonej
16 posts |
Thank you very much for your reply and advice. Unfortunately, I have followed your instructions regarding the sound but still can't get it to work. I may be doing something very basic wrongly but I'm not sure what exactly. Is it possible for you to take me through the process step by step please. I have downloaded the sound files (wav) and saved them in my Simsig folder in My Documents.
Log in to reply |
| York North/South 26/09/2017 at 17:51 #101950 | |
postal
5265 posts |
keredsonej in post 101949 said:Thank you very much for your reply and advice. Unfortunately, I have followed your instructions regarding the sound but still can't get it to work. I may be doing something very basic wrongly but I'm not sure what exactly. Is it possible for you to take me through the process step by step please. I have downloaded the sound files (wav) and saved them in my Simsig folder in My Documents.Did you open the F3 panel and click on the Messages tab? This brings up a page with an Event Settings section. Using the drop-down you can select which event you would like to generate a sound warning (maybe something like "train ready to start"). Then check the "play sound" box and use the icon with the three pips at the right hand end of the box to navigate to the sound you want to play when the event takes place. Finally, have you got the loudspeaker on your system enabled? “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| York North/South 27/09/2017 at 13:51 #101963 | |
|
keredsonej
16 posts |
I have done everything you've suggested but I'm still soundless. When I select the wav file, eg TRTS, and then select 'play sound', I hear the correct sound for an instant, then but it does not happen for TRTS on the actual simulation. I'm still pleading for help here.
Log in to reply |
| York North/South 27/09/2017 at 17:48 #101973 | |
|
postal
5265 posts |
keredsonej in post 101963 said:I have done everything you've suggested but I'm still soundless. When I select the wav file, eg TRTS, and then select 'play sound', I hear the correct sound for an instant, then but it does not happen for TRTS on the actual simulation. I'm still pleading for help here.Don't know what to suggest then. However, other people have sounds working correctly so it may be that there is either something oddball about your system or you have missed one of the steps in the setting-up process. Have you tried assigning any sounds to any of the other actions that show in the drop down box to see if that works? Also bear in mind that a lot of the downloaded sounds last for only a second or two so you won't get anything ringing away at you for a length of time to attract your attention. You can check the individual sounds by opening the wav file in a media player. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 27/09/2017 at 19:03 by postal Reason: None given Log in to reply |
| York North/South 28/09/2017 at 05:43 #101979 | |
BarryM
2158 posts |
postal in post 101973 said:keredsonej in post 101963 said:Keredsonej said above that he heard the TRTS sound when inserting the wave file. When testing, York could be a bit touchy sometimes. Are you able to send a copy of a saved file. Ctrl S will send a file (xxxx.ssg) to the "Simulation\yorkns" folder?I have done everything you've suggested but I'm still soundless. When I select the wav file, eg TRTS, and then select 'play sound', I hear the correct sound for an instant, then but it does not happen for TRTS on the actual simulation. I'm still pleading for help here.Don't know what to suggest then. However, other people have sounds working correctly so it may be that there is either something oddball about your system or you have missed one of the steps in the setting-up process. Barry Barry, Sydney, New South Wales, Australia Last edited: 28/09/2017 at 05:47 by BarryM Reason: None given Log in to reply |
| York North/South 28/09/2017 at 12:15 #101980 | |
|
Chromatix
190 posts |
Do you have aggressive power-saving settings on your soundcard? It often takes a moment for a soundcard to wake up when a sound needs to be played - potentially longer than most of the sounds used by SimSig.
Log in to reply |
| York North/South 28/09/2017 at 13:57 #101982 | |
|
Steamer
3985 posts |
BarryM in post 101979 said:postal in post 101973 said:There's no point asking for a saved game: Message settings aren't stored in saved games. If you, me, or anyone else loaded the save, we'd get messages and sounds according to our own set-ups.keredsonej in post 101963 said:Keredsonej said above that he heard the TRTS sound when inserting the wave file. When testing, York could be a bit touchy sometimes. Are you able to send a copy of a saved file. Ctrl S will send a file (xxxx.ssg) to the "Simulation\yorkns" folder?I have done everything you've suggested but I'm still soundless. When I select the wav file, eg TRTS, and then select 'play sound', I hear the correct sound for an instant, then but it does not happen for TRTS on the actual simulation. I'm still pleading for help here.Don't know what to suggest then. However, other people have sounds working correctly so it may be that there is either something oddball about your system or you have missed one of the steps in the setting-up process. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following user said thank you: BarryM |
| York North/South 28/09/2017 at 14:42 #101983 | |
|
MarkC
1105 posts |
From the sounds of it when you set the sounds in F3 they play when you click the play button, but when you exit they don't. So first question is when you go back into F3 are the sounds still assigned or not? The second is when you exit from F3 do you click on the window exit (the red X in the top right hand corner) or click "OK". Last edited: 28/09/2017 at 14:42 by MarkC Reason: None given Log in to reply |