Page 2 of 3
Moss Vale Issues/Bugs 01/08/2018 at 18:37 #110666 | |
Mattyq
![]() 259 posts |
jc92 in post 110622 said:a new one. a phone call from train (none) advising me it is approaching SL22 signal but no train has entered the area to trigger a call, hence(none) not being populated with the ID.Fixed in Vers1.2 Not fat ..... fluffy!! (G Iglesias) Log in to reply |
Moss Vale Issues/Bugs 04/08/2018 at 12:12 #110741 | |
hotwellian
![]() 211 posts |
Train 1223-2 from Gouldburn S yard for Tarrago. Tried phoning CRN Control for a train order for Tarrago, but the only option given is for Temora. Save attached.
Post has attachments. Log in to view them. Log in to reply |
Moss Vale Issues/Bugs 04/08/2018 at 13:54 #110743 | |
Mattyq
![]() 259 posts |
hotwellian in post 110741 said:Train 1223-2 from Gouldburn S yard for Tarrago. Tried phoning CRN Control for a train order for Tarrago, but the only option given is for Temora. Save attached.Just had a look at the save. If you open you train list (F2), you'll see SP31 is still in sim. It's actually still on the section between Joppa Jn and Tarago. That is the reason you can't get a Train Order. Once SP31 drops off sim, you can request a Train Order for 1223. That said, your issue has exposed a sim fault - SP31 should show last location Joppa Jn on the F2 screen. Fixed in V1.1. Lastly, why do you have 1223 turning out onto the branch on a shunt signal, if you don't mind me asking? Hope you're enjoying the sim! :-) Not fat ..... fluffy!! (G Iglesias) Log in to reply The following user said thank you: hotwellian |
Moss Vale Issues/Bugs 04/08/2018 at 16:43 #110748 | |
hotwellian
![]() 211 posts |
Thanks, I should have held 1223 on the main line. Will look out for what is still on the line in future. I am very much enjoying the new Aussie challenges! Log in to reply The following user said thank you: Mattyq |
Moss Vale Issues/Bugs 08/08/2018 at 13:53 #110835 | |
Nazarail
![]() 6 posts |
Downloaded V1.1 tonight Train 2134 at 00:01:14 entered: Berrima Boral Sidings, timetable is 12/1300's. The Right way, The Wrong way and the Railway Log in to reply |
Moss Vale Issues/Bugs 08/08/2018 at 19:05 #110839 | |
grahamj42
![]() 130 posts |
It seems there is a data error in the Moss Vale interlocking (sim. version 1.1). Train 2124 called waiting at 152.6 on the up main, but on the panel, it was stopped at 155.4 and occupying 158_2A1T. 155_4AT and 152_6AT were clear and 150_2AT occupied. Log in to reply |
Moss Vale Issues/Bugs 08/08/2018 at 21:04 #110842 | |
Joe S
![]() 129 posts |
I may have one... (I'm on the updated loaded version.) Got 3MB7 at a stand at CA30 signal bound for Moss Vale. The previous train went down the Stockinbingal branch and as such the overlap is set that way. 3MB7 is now sitting at CA30 with the overlap locked in towards Stockinbingal with no way it seems of swinging it back towards Jindalee. It just says 'no overlap available'. There are no other trains in the area to affect it. Any help?! Last edited: 08/08/2018 at 21:07 by Joe S Reason: None given Log in to reply |
Moss Vale Issues/Bugs 08/08/2018 at 21:42 #110843 | |
Gwasanaethau
![]() 509 posts |
One more (sorry!) – with a route set from MV69 to MV79 at Moss Vale, the overlap seems to ‘jump’ over Yarrawa Street crossing (see attached image).![]() Post has attachments. Log in to view them. Log in to reply |
Moss Vale Issues/Bugs 09/08/2018 at 03:45 #110845 | |
TylerE
![]() 149 posts |
Played about 2 sim hours on the new version. I saw multiple instances of TDs getting "stranded" and not stepping with the train. One for sure was from the Up Relief at Moss Vale on the Underra line. Another was on one of the long simple double track sections on the right side. Log in to reply |
Moss Vale Issues/Bugs 09/08/2018 at 09:29 #110847 | |
Mattyq
![]() 259 posts |
Joe S in post 110842 said:I may have one... (I'm on the updated loaded version.)Known fault. Mantis 21363 to name just one. Unfortunately, there is no workaround available at this stage other than to remove the train. Not fat ..... fluffy!! (G Iglesias) Log in to reply |
Moss Vale Issues/Bugs 09/08/2018 at 09:30 #110848 | |
Mattyq
![]() 259 posts |
grahamj42 in post 110839 said:It seems there is a data error in the Moss Vale interlocking (sim. version 1.1).Can you provide a game save please? Not fat ..... fluffy!! (G Iglesias) Log in to reply |
Moss Vale Issues/Bugs 09/08/2018 at 09:30 #110849 | |
Mattyq
![]() 259 posts |
grahamj42 in post 110839 said:It seems there is a data error in the Moss Vale interlocking (sim. version 1.1).Can you provide a game save please? Not fat ..... fluffy!! (G Iglesias) Log in to reply |
Moss Vale Issues/Bugs 09/08/2018 at 09:55 #110850 | |
Mattyq
![]() 259 posts |
Gwasanaethau in post 110843 said:One more (sorry!) – with a route set from MV69 to MV79 at Moss Vale, the overlap seems to ‘jump’ over Yarrawa Street crossing (see attached image).Known issue. This is a "lesser of 2 evils" situation. It's the only way we could fix the previous rendering issue of green blue green over that section of track. The "Show overlaps" is really only a player aid so, unless a full fix is found, we've had to settle with that. It looks wrong but it is not prototypical anyway and at least it shows the full extent of the overlap, albeit with a bit missing in the middle. This issue has been added to the "Known faults" section of the manual. Not fat ..... fluffy!! (G Iglesias) Log in to reply The following user said thank you: Gwasanaethau |
Moss Vale Issues/Bugs 09/08/2018 at 10:20 #110852 | |
Mattyq
![]() 259 posts |
TylerE in post 110845 said:Played about 2 sim hours on the new version.Was able to reproduce MV62 stepping error. Fixed in V1.2. Need more specific information for other areas where the error exists. Please quote signal numbers and/or locations and provide a game save where possible. Thank you for the feedback. Not fat ..... fluffy!! (G Iglesias) Log in to reply |
Moss Vale Issues/Bugs 09/08/2018 at 16:01 #110863 | |
TylerE
![]() 149 posts |
Ok, found a save with another one. Note off the TD for ST21 is just past Yass Jct, but the train is almost to Cunnigar Post has attachments. Log in to view them. Log in to reply |
Moss Vale Issues/Bugs 09/08/2018 at 19:24 #110865 | |
grahamj42
![]() 130 posts |
Mattyq in post 110849 said:grahamj42 in post 110839 said:Here is a saved game at the point where 2124 has just stopped.It seems there is a data error in the Moss Vale interlocking (sim. version 1.1).Can you provide a game save please? Post has attachments. Log in to view them. Log in to reply |
Moss Vale Issues/Bugs 09/08/2018 at 21:10 #110869 | |
jc92
![]() 3649 posts |
When points PHN105A (left end of harden Station) are reversed, the overlap and occupied TC illuminations bleed as if a train has been authorised to pass a signal at danger with no route set. Also marulan boral sidings might need to be a bit longer. I've observed a couple of train disappear off the sim as they reach the exit before the rear of the train has cleared the last track circuit. "We don't stop camborne wednesdays" Last edited: 09/08/2018 at 21:42 by jc92 Reason: None given Log in to reply |
Moss Vale Issues/Bugs 11/08/2018 at 11:55 #110904 | |
Sparky
![]() 84 posts |
grahamj42 in post 110865 said:Mattyq in post 110849 said:I have been able to reproduce this fault with the save & have reported it in Mantis 21424. It will be resolved in the next release.grahamj42 in post 110839 said:Here is a saved game at the point where 2124 has just stopped.It seems there is a data error in the Moss Vale interlocking (sim. version 1.1).Can you provide a game save please? I intend to live forever. So far so good Log in to reply The following user said thank you: grahamj42 |
Moss Vale Issues/Bugs 11/08/2018 at 22:27 #110923 | |
jc92
![]() 3649 posts |
Another. Passenger trains using platform 2 at Yass Jct report wrong platform if booked into P1. The manual says they should use 2 whenever possible even if booked into a different platform. Same at gouldbourn.
"We don't stop camborne wednesdays" Log in to reply |
Moss Vale Issues/Bugs 14/08/2018 at 12:58 #111031 | |
Mattyq
![]() 259 posts |
jc92 in post 110923 said:Another. Passenger trains using platform 2 at Yass Jct report wrong platform if booked into P1. The manual says they should use 2 whenever possible even if booked into a different platform. Same at gouldbourn.Mantis 21438 Not fat ..... fluffy!! (G Iglesias) Log in to reply |
Moss Vale Issues/Bugs 20/08/2018 at 18:03 #111306 | |
Mattyq
![]() 259 posts |
Nazarail in post 110835 said:Downloaded V1.1 tonightUnable to reproduce this one. 2134 not meant to enter until 1215hrs. Let me know if the problem persists please. Not fat ..... fluffy!! (G Iglesias) Log in to reply |
Moss Vale Issues/Bugs 20/08/2018 at 19:31 #111310 | |
Phil-jmw
![]() 674 posts |
Train TM72 1040 Tahmoor Colliery - Kembla routed via Inspection Road and North Fork calls up from MV17 sig with an incorrect route, stating booked via Moss Vale Jct. If I ran the train towards Moss Vale there would be no road with sufficient length to be able to get in clear behing a signal to then go towards Calwalla. I got him on the move towards the north fork by instructing him to bypass Moss Vale Jct., but I've now encountered further problems as I can't clear MV26 sig towards Calwalla (points locked normal by another route). Another problem I've had is with trains that terminate at Moss Vale then shunt to the Up Refuge before shunting back out to Pfm.1 claiming they are wrongly routed when signalled from MV74 towards the Up Refuge. Edit - I set TM72 back behind MV17 sig, cancelled the route from MV17 - NV26 (the overlap of which was locking the North Jn points normal) then backset routes MV25 - 34.6 followed by MV17 - MV26 to get the overlaps to fall correctly and TM72 is now on the move. I do now recall reading somewhere in the forum that it is wise to backset routes because of the way the overlaps can stitch you up. Regards, Phil. Last edited: 20/08/2018 at 19:47 by Phil-jmw Reason: None given Log in to reply |
Moss Vale Issues/Bugs 21/08/2018 at 01:25 #111323 | |
rosslamont
![]() 2 posts |
Really enjoying the Australian Sims. Have a general problem with trains from Boral Marulan. They are all timetabled to stop at Medway Junction, but they never do. Where are they meant to stop? The problem is they just carry on up the main line, and end up very early at Moss Vale, with the timetable still showing the next stop as Medway. Cheers Ross Ross Log in to reply |
Moss Vale Issues/Bugs 21/08/2018 at 10:04 #111324 | |
Mattyq
![]() 259 posts |
Phil-jmw in post 111310 said:Train TM72 1040 Tahmoor Colliery - Kembla routed via Inspection Road and North Fork calls up from MV17 sig with an incorrect route, stating booked via Moss Vale Jct. If I ran the train towards Moss Vale there would be no road with sufficient length to be able to get in clear behing a signal to then go towards Calwalla. I got him on the move towards the north fork by instructing him to bypass Moss Vale Jct., but I've now encountered further problems as I can't clear MV26 sig towards Calwalla (points locked normal by another route).TM72 fixed. SN jobs for Moss Vale UR being worked on. If not next release, then the one after. Not fat ..... fluffy!! (G Iglesias) Log in to reply The following user said thank you: Phil-jmw |
Moss Vale Issues/Bugs 21/08/2018 at 10:05 #111325 | |
Mattyq
![]() 259 posts |
rosslamont in post 111323 said:Really enjoying the Australian Sims.Fixed in Vers 1.2 (next release) Not fat ..... fluffy!! (G Iglesias) Log in to reply |