Page 1 of 1
| HS @ Buxton Relief sidings 22/09/2018 at 15:49 #112274 | |
hotwellian
211 posts |
Running 1987 TT. Despite operating the GF I cannot get a loco (0T88) to move from Relief siding #2 into the headshunt.
Log in to reply |
| HS @ Buxton Relief sidings 22/09/2018 at 22:06 #112279 | |
|
Phil-jmw
675 posts 
|
hotwellian in post 112274 said:Running 1987 TT. Despite operating the GF I cannot get a loco (0T88) to move from Relief siding #2 into the headshunt.Have you checked the box in the ground frame window giving him the handsignal to exit the headshunt? Log in to reply |
| HS @ Buxton Relief sidings 23/09/2018 at 09:02 #112285 | |
|
hotwellian
211 posts |
I have checked the hand signal from arrival line to headhsunt, train list reports that the train is stopped at BXRR2
Log in to reply |
| HS @ Buxton Relief sidings 23/09/2018 at 11:56 #112287 | |
KymriskaDraken
963 posts |
hotwellian in post 112285 said:I have checked the hand signal from arrival line to headhsunt, train list reports that the train is stopped at BXRR2BXRR2 is the handsignal from the arrivals road into the headshunt. The loco should move forward if that handsignal is given and the points are set correctly (ie Normal). Can you check that the points are the correct way round, and that the correct handsignal (H/S from arrival road to headshunt - the top one) is given? When the loco is clear of the points in the headshunt the indicator light will go out.   Post has attachments. Log in to view them. Log in to reply |
| HS @ Buxton Relief sidings 24/09/2018 at 17:09 #112309 | |
|
Phil-jmw
675 posts
|
hotwellian in post 112285 said:I have checked the hand signal from arrival line to headhsunt, train list reports that the train is stopped at BXRR2Sounds like you've left the handpoints reverse after a previous movement. You need to normalise the points, handsignal him into the headshunt, uncheck the 'Handsignal from Arrival line to Headshunt' box, pull the points then check the 'Departure from Headshunt' box. Last edited: 24/09/2018 at 17:11 by Phil-jmw Reason: None given Log in to reply |