Page 1 of 1
| Dividing Error 20/10/2018 at 18:41 #112760 | |
SamTDS
153 posts |
While playing today during a normal on-time divide I received this error which subsequently halted the operation of the train. This error on the train carried over with the save as attached and was fixed by reloading an older save. https://prnt.sc/l8csrj
Post has attachments. Log in to view them. SamTDS - STDS | My comments are my opinions and interpretations and do not reflect on the wonderfull SimSig team. I am in no way part of the team. Log in to reply |
| Dividing Error 20/10/2018 at 19:54 #112761 | |
headshot119
4869 posts |
Did you do anything to cause the issue? I can't say I can reproduce it from a fresh start. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Dividing Error 20/10/2018 at 19:55 #112762 | |
9pN1SEAp
1181 posts |
I haven’t check the attachment but I’ll bet that one of the trains is the same size as the original leaving the other as length zero.
Jamie S (JAMS) Log in to reply |
| Dividing Error 20/10/2018 at 20:00 #112763 | |
|
headshot119
4869 posts |
9pN1SEAp in post 112762 said:I haven’t check the attachment but I’ll bet that one of the trains is the same size as the original leaving the other as length zero.5N51 hasn't actually divided, it's status is "Error (1)-". I initially suspected the length was an issue, but everything is kosher. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Dividing Error 20/10/2018 at 21:26 #112764 | |
|
SamTDS
153 posts |
headshot119 in post 112763 said:9pN1SEAp in post 112762 said:yeah, the wierdest thing was that it didn't repeat when i loaded the autosave from just before. i got that error and hadnt notices anything until i checked the train list which showed that. I normally run the legacy train list as i find it to be better for when i have to manual reverse. Included is the autosave from 4 minutes before i got the message. Anyhow its good to mention the error incase it comes up again then there is some infomation already know making it a bit easier to diagnose the issueI haven’t check the attachment but I’ll bet that one of the trains is the same size as the original leaving the other as length zero.5N51 hasn't actually divided, it's status is "Error (1)-". Post has attachments. Log in to view them. SamTDS - STDS | My comments are my opinions and interpretations and do not reflect on the wonderfull SimSig team. I am in no way part of the team. Log in to reply |
| Dividing Error 20/10/2018 at 23:15 #112765 | |
clive
2789 posts |
SamTDS in post 112760 said:While playing today during a normal on-time divide I received this error which subsequently halted the operation of the train. This error on the train carried over with the save as attached and was fixed by reloading an older save. https://prnt.sc/l8csrjIf this happens again, please note that there will be information in the log file that might be of use to Geoff and me. We'd also need to know the loader version. Log in to reply |
| Dividing Error 20/10/2018 at 23:36 #112766 | |
|
SamTDS
153 posts |
clive in post 112765 said:SamTDS in post 112760 said:Loader Version 4.8.2While playing today during a normal on-time divide I received this error which subsequently halted the operation of the train. This error on the train carried over with the save as attached and was fixed by reloading an older save. https://prnt.sc/l8csrjIf this happens again, please note that there will be information in the log file that might be of use to Geoff and me. We'd also need to know the loader version. When i had closed SimSig to restart it one of the things was the loader showing updates to the sim so i did it. Might just be a SEU (single-event upset), basically a bit flip causing tiny data loss but when the machine is relying on it and a SEU happenes then it becomes a rabit of negative neuphoria aka not a happy bunny. As for logs i dont really know the first place to go look for them right off the bat. When i get problems i usually google the stuff. PS: yes i google to fix my tech even if i did software development Level 3 SamTDS - STDS | My comments are my opinions and interpretations and do not reflect on the wonderfull SimSig team. I am in no way part of the team. Last edited: 20/10/2018 at 23:37 by SamTDS Reason: None given Log in to reply |
| Dividing Error 21/10/2018 at 01:00 #112768 | |
postal
5265 posts 
|
SamTDS in post 112766 said:As for logs i dont really know the first place to go look for them right off the bat.Log files are normally held in the first of the locations ticked under the Folder Options list from the Loader start-up screen. They are txt files named in the format SimSig Loader0.log with the numeric increasing when more than one instance of the loader is running and parallel log files are being updated. IIRC the level of data saved in the log file depends on the user licence available for the sim (User/Tester etc. etc.) so it is not guaranteed to be of the depth helpful to Geoff/Clive. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Dividing Error 21/10/2018 at 14:45 #112773 | |
|
SamTDS
153 posts |
Heres the log, unfortunatly looking at it it seems to only have shown loading the sim and not the error message
Post has attachments. Log in to view them. SamTDS - STDS | My comments are my opinions and interpretations and do not reflect on the wonderfull SimSig team. I am in no way part of the team. Log in to reply |