Page 4 of 4
| Manchester East 07/07/2018 at 19:56 #110110 | |
pedroathome
915 posts |
Available via check for updates is an update for Manchester East. For those interested, the change log is as follows Manchester East - 1.5 ======================================== - 0019547: [Suggestion] Guide Bridge Yards - Calls to and from Shunters (Pedroathome) - resolved. - 0021054: [Bug] Trains not phoning from signals when entering from Man North via Ashburys (Pedroathome) - resolved. - 0020163: [Bug] Missing TT locations (Pedroathome) - resolved. - 0020172: [Bug] TD doesn't step/clear for route from AS894 to AS988 (Pedroathome) - resolved. - 0020261: [Question] Slot from Heaton Norris (Pedroathome) - resolved. Log in to reply The following user said thank you: norman B |
| Manchester East 07/07/2018 at 20:47 #110111 | |
whatlep
377 posts |
pedroathome in post 110110 said:Available via check for updates is an update for Manchester East. For those interested, the change log is as followsMany thanks for the updates and effort involved. 1 comment and 3 possible error/ bug reports after loading the changes: 1) Are users supposed to be seeing the fringe activities around Philips Park and Piccadilly? I quite like it! 2) Just loaded the game using my own 1985 timetable and was advised that an error condition had been recorded in the loader log. The simulatioon loads OK and appears to run, but the info below was logged. Hope it's of assistance. CompilerVersion: 4.7.1 CompileDateTime: 2018/07/07 13:52:30 YSLOT_GB_AVENUE-PUL: ID not found in GetObjectArray (PUL): U1373AD Simulation loaded 3) BUG1? - Signal GB969 does not seem to clear when a train is standing in the Up & Down Loop east of Guide Bridge. See attached screen print. Train has been timetabled to sit at Guide Bridge end of loop to await loco, rather than use default location. Post has attachments. Log in to view them. Last edited: 07/07/2018 at 21:42 by whatlep Reason: None given Log in to reply |
| Manchester East 07/07/2018 at 21:30 #110112 | |
|
pedroathome
915 posts |
whatlep in post 110111 said:pedroathome in post 110110 said:I can only apologist for the issues which I've put into this update. This should be correctly resolved in the update which I believe is being pushed as I type (1.5.1)Available via check for updates is an update for Manchester East. For those interested, the change log is as followsMany thanks for the updates and effort involved. 1 comment and 2 possible error/ bug reports after loading the changes: James Log in to reply The following users said thank you: norman B, whatlep |
| Manchester East 07/07/2018 at 21:47 #110114 | |
|
whatlep
377 posts |
No apology required. Stuff happens. It's great that M/cr East is getting even better than it already was.
Last edited: 07/07/2018 at 21:47 by whatlep Reason: None given Log in to reply |
| Manchester East 07/07/2018 at 23:59 #110120 | |
|
Class 92
359 posts |
I've just routed 6E06 from Ashburys towards Philips Park South Junction and then routed behind that 5J51 bound for Newton Heath but both trains have re-entered at Baguley Fold Junction when only 6E06 should have done? Overall though, I'm loving the sim and have already put many hours into it!
Log in to reply |
| Manchester East 08/07/2018 at 01:15 #110122 | |
|
whatlep
377 posts |
Just to confirm that the 3 items I raised on Saturday evening are all fixed in the latest release. Many thanks for that.
Log in to reply |
| Manchester East 31/07/2018 at 01:10 #110601 | |
|
whatlep
377 posts |
I've spotted what appears to be a bug introduced in the latest version of M/cr East. It affects trains moving from Piccadilly to Ashburys sidings via the bi-directional goods line. Basically the locations previously used for timetabled moves no longer appear to be valid. See the attached V1.1 1989 timetable in which 6H21MX-0550 and 6M08MX-0451 no longer validate correctly, having been fine in V1.0. A third train - 5J41-1248 - also failed to validate, but inserting Ashburys as a location for the route Ashburys sidings - Piccadilly via the reversible goods line seems to have fixed that problem. Post has attachments. Log in to view them. Log in to reply |
| Manchester East 03/08/2018 at 16:43 #110717 | |
|
whatlep
377 posts |
whatlep in post 110601 said:I've spotted what appears to be a bug introduced in the latest version of M/cr East. It affects trains moving from Piccadilly to Ashburys sidings via the bi-directional goods line. Basically the locations previously used for timetabled moves no longer appear to be valid. See the attached V1.1 1989 timetable in which 6H21MX-0550 and 6M08MX-0451 no longer validate correctly, having been fine in V1.0.Found fixes for the above problems and released new version of the 1989 timetable which covers them, but in doing so identified three further issues that may be bugs in M/cr East v1.5.1: 1) Signal AS987 not clearing for trains leaving Ashburys Yard via the Up Arrival. 2) Unable to obtain release for Ashburys Reception (Ardwick TMD) 3) Approach warning not being given for trains from Brewery Sidings to Baguley Fold Jn. Trains can be cautioned past red signals to get around items (1) & (2). See attached saved file for illustration of problems. Post has attachments. Log in to view them. Log in to reply |
| Manchester East 04/08/2018 at 11:57 #110740 | |
|
pedroathome
915 posts |
whatlep in post 110717 said:1 - I've fixed thi. for some reason the signal was trying to set as a main aspect route. This should have been a sub. Fixed for the next update. 2 - Unable to reproduce this. Sorry I have to ask the obvious first, but did you try phoning the yard. Tried with your 6H21 and he was accepted without issues. 3 - Are you meaning that you dont see him in the appropach berth as soon as he enters the sim? If so, there is a few second delay before the off sim onwards route is set at Philips West Junction. The same would apply with trains going to Ashburys in this situation coming from eitehr Miles Platting Junction or Brewery Junction ==== ORIGIONAL ABOVE, EDITED BELOW ==== Looking at the thread here, for point 3, is this what you was refering to? https://www.SimSig.co.uk/Forum/ThreadView/48977 James Last edited: 04/08/2018 at 12:19 by pedroathome Reason: None given Log in to reply |
| Manchester East 04/08/2018 at 17:57 #110752 | |
|
whatlep
377 posts |
pedroathome in post 110740 said:whatlep in post 110717 said:James1 - I've fixed thi. for some reason the signal was trying to set as a main aspect route. This should have been a sub. Fixed for the next update. Thanks for your usual quick response. 1) Noted: thanks 2) Good question! My error of forgetfulness, compounded by the way users obtain a clearance for the goods line directly above by clicking on the empty circle. 3) Exactly that. All other entrances produce the usual "ping" when a train enters the area, but neither Miles Platting nor Brewery Sidings do so. Log in to reply |
| Manchester East 19/10/2018 at 19:49 #112751 | |
9pN1SEAp
1180 posts 
|
6H36 from New Mills stopped at RJ38, detached lco, and ran around happily around Wododley before shunting off RJ35 to head the train into Bredbury. However, it's not cleared the points so I have had to manually reverse the train to force it to reach "RJ34 (rev)" and pull out of the control area. Sim 1.5, Groundhog 0000 1.1.3, Loader 4.8.2. Attached is where I'm at. Thanks Jamie Post has attachments. Log in to view them. Jamie S (JAMS) Last edited: 19/10/2018 at 19:49 by 9pN1SEAp Reason: None given Log in to reply |
| Manchester East 20/10/2018 at 17:12 #112759 | |
Meld
1111 posts |
Fixed - should have had near end + 25 stopping position all timetables updated to TT ver 1.1.5 I'm sure they'll be available later this evening via check for updates Passed the age to be doing 'Spoon Feeding' !!! Log in to reply The following user said thank you: 9pN1SEAp |
| Manchester East 27/12/2018 at 10:13 #114282 | |
|
Trainfan344
262 posts |
Signal SE7058 displays double yellow when the next signal SE7054 shows red. Signal SE7056 is shown as a repeating signal so shouldn't count in the signalling system.
Log in to reply |
| Manchester East 27/12/2018 at 10:33 #114283 | |
jc92
3685 posts |
Trainfan344 in post 114282 said:Signal SE7058 displays double yellow when the next signal SE7054 shows red. Signal SE7056 is shown as a repeating signal so shouldn't count in the signalling system.I'm not sure what you mean by shouldn't count. This aspect sequence is correct. A repeater is a signal that cannot display a red aspect (like a distant signal) . It is still spaced to provide suitable braking distance from the next signal so does "count" for signalling. Are you thinking of a cooacting signal or a banner repeater? "We don't stop camborne wednesdays" Last edited: 27/12/2018 at 10:33 by jc92 Reason: None given Log in to reply |
| Manchester East 27/12/2018 at 10:35 #114284 | |
|
jc92
3685 posts |
While looking into train fans problem I did notice however that reddish South I'd shown as being on the south side of the Denton line rather than the North which is how its displayed on Stockport sim. North is correct.
"We don't stop camborne wednesdays" Log in to reply |
| Manchester East 27/12/2018 at 11:15 #114285 | |
|
pedroathome
915 posts |
jc92 in post 114284 said:While looking into train fans problem I did notice however that reddish South I'd shown as being on the south side of the Denton line rather than the North which is how its displayed on Stockport sim. North is correct.Just to be clear, and I'm agreeing at one sim is wrong. Stockport is correct? James Log in to reply |
| Manchester East 27/12/2018 at 11:20 #114286 | |
|
jc92
3685 posts |
pedroathome in post 114285 said:jc92 in post 114284 said:Stockport is definetely correctWhile looking into train fans problem I did notice however that reddish South I'd shown as being on the south side of the Denton line rather than the North which is how its displayed on Stockport sim. North is correct.Just to be clear, and I'm agreeing at one sim is wrong. Stockport is correct? "We don't stop camborne wednesdays" Log in to reply |
| Manchester East 27/12/2018 at 11:21 #114287 | |
|
pedroathome
915 posts |
jc92 in post 114286 said:pedroathome in post 114285 said:Have fixed for the next update. Easy mistake to make, at least this time I rememberd to add the location :Pjc92 in post 114284 said:Stockport is definetely correctWhile looking into train fans problem I did notice however that reddish South I'd shown as being on the south side of the Denton line rather than the North which is how its displayed on Stockport sim. North is correct.Just to be clear, and I'm agreeing at one sim is wrong. Stockport is correct? James Log in to reply The following user said thank you: jc92 |
| Manchester East 27/12/2018 at 17:24 #114294 | |
|
TUT
532 posts |
Trainfan344 in post 114282 said:Signal SE7058 displays double yellow when the next signal SE7054 shows red. Signal SE7056 is shown as a repeating signal so shouldn't count in the signalling system.The simulation is correct. SE7056 is a repeater/distant signal. Would have been numbered SE7054R in the old style. It is part of the signalling sequence, it just cannot display a red aspect. Don't confuse with a banner repeater which, you're right, don't count. Log in to reply The following user said thank you: Trainfan344 |
| Manchester East 06/02/2019 at 19:47 #115438 | |
|
Oddjob
131 posts |
This link is to a drivers view of the route from Piccadilly to Glossop and return. As always with Don Coffey's videos it is excellent quality and very informative. https://www.youtube.com/watch?v=9KokIdfs75g Last edited: 06/02/2019 at 19:49 by Oddjob Reason: None given Log in to reply The following user said thank you: GeoffM |
| Manchester East 07/02/2019 at 11:10 #115449 | |
|
norman B
111 posts |
Watched this last evening. I have watched all of his videos on You Tube .Great details too. Log in to reply |