Page 1 of 1
Marylebone screen 05/08/2010 at 10:36 #1564 | |
jamie
![]() 8 posts |
Whilst waiting for my Wrexham & Shropshire train yesterday at Marylebone I noticed this on the back wall of the Customer Help point between Upper Crust and WHSmiths - http://www.flickr.com/photos/ketmonkey/4862909038/
Log in to reply |
Marylebone screen 05/08/2010 at 14:00 #10487 | |
officer dibble
![]() 397 posts |
nice stuff, looks like a considerably larger version of TMIS by Bombardier that we have in our announcers office at work.
Log in to reply |
Marylebone screen 08/08/2010 at 15:06 #10573 | |
tgb
![]() 19 posts |
There's quite a few of these about if you have time to look around. They're usually to aid staff. I noticed one the other day on Gatwick Airport platform 3. Its by the London end escalators/stairs, about waist high in a small metal cabinet. The lid is usually open and it shows the Gatwick area. Tony Log in to reply |
Marylebone screen 31/08/2010 at 20:53 #11218 | |
Sprite
![]() 3 posts |
I think there are a few small ones in the help point by the barriers (Platform side) at Leeds
Log in to reply |
Marylebone screen 03/09/2010 at 01:14 #11261 | |
tccb
![]() 14 posts |
There's one at Manchester Picc at the information desk in the middle of the concourse. They don't look like IECC, more like an overview. I couldn't understand at all what was going on!
Log in to reply |
Marylebone screen 15/11/2010 at 19:14 #12515 | |
jimgos2005
![]() 129 posts |
I think its for train despatch staff to see where certain trains are in case of late running and delays also helpful during the peak especially at Marylebone due to the short turn round times of trains there never had it when I was there had to radio the signalman. Hope this helps Log in to reply |
Marylebone screen 21/11/2010 at 12:07 #12583 | |
outofsection
![]() 149 posts |
The one at Marylebone is very useful for me to see which platform my train is coming in on - which gives me a better chance of actually getting a seat on the train! Amersham trains are usually 2BXX or 2CXX ![]() Log in to reply |
Marylebone screen 21/11/2010 at 14:14 #12584 | |
Osprey
![]() 35 posts |
I remember in the early/mid 80s when I worked on Plumstead Station some of the busier stations had vdus about the size of an old portable that showed all the different panels in London Bridge and Dartford boxes.Woolwich Arsenal had one as did Dartford and Sidcup.Generally they were used so the Foremen could phone up the smaller stations and let them know about trains running out of booked order to save the signalman phoning everybody.It was very interesting to watch the rush hour in the London Bridge area.
Log in to reply |
Marylebone screen 21/11/2010 at 15:31 #12585 | |
wellgroomed
![]() 110 posts |
outofsection said:The one at Marylebone is very useful for me to see which platform my train is coming in on - which gives me a better chance of actually getting a seat on the train! Amersham trains are usually 2BXX or 2CXXxCxx is for trains Coming into Marylebone from the Amersham line and xBxx is for trains heading Back towards the Amersham line. Once you get to know your inward train, then it will always give you an indication of where your train will normally be... ...unless it's moved onto a different service of course! Log in to reply |
Marylebone screen 25/11/2010 at 13:27 #12636 | |
outofsection
![]() 149 posts |
wellgroomed said:outofsection said:Thanks Wellgroomed! I could never work out from the limited time I was able to study the display which was which... now I know! VERY useful!The one at Marylebone is very useful for me to see which platform my train is coming in on - which gives me a better chance of actually getting a seat on the train! Amersham trains are usually 2BXX or 2CXXxCxx is for trains Coming into Marylebone from the Amersham line and xBxx is for trains heading Back towards the Amersham line. Log in to reply |
Marylebone screen 25/11/2010 at 15:44 #12642 | |
ajax103
![]() 1113 posts |
officer dibble said:nice stuff, looks like a considerably larger version of TMIS by Bombardier that we have in our announcers office at work.They have this at Oxford as well, looks impressive - can you see the signals change colour as you can with CCF? I have tried Googling TMIS but can't find anything on it, help please............ Log in to reply |
Marylebone screen 25/11/2010 at 16:15 #12646 | |
UKTrainMan
![]() 1803 posts |
ajax103 said:I have tried Googling TMIS but can't find anything on it, help please............Try Googling 'Train Management Information System' instead? Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
Marylebone screen 25/11/2010 at 17:11 #12647 | |
officer dibble
![]() 397 posts |
ajax103 said:officer dibble said:On our Reading screen at work we can see routes set/cancelled, but with the Paddington screen (IECC) signals can be seen changing from Red to Green and v.v.nice stuff, looks like a considerably larger version of TMIS by Bombardier that we have in our announcers office at work.They have this at Oxford as well, looks impressive - can you see the signals change colour as you can with CCF? Log in to reply |
Marylebone screen 25/11/2010 at 19:10 #12651 | |
wellgroomed
![]() 110 posts |
ajax103 said:officer dibble said:The company that provides TMIS is not on-line.nice stuff, looks like a considerably larger version of TMIS by Bombardier that we have in our announcers office at work.They have this at Oxford as well, looks impressive - can you see the signals change colour as you can with CCF? The age of the signalbox generally has a bearing on the level of information that can be displayed. Marylebone ASC shows the colour of the signals (i.e. on or off), manual main aspect routes having been set (like the white routes set in SimSig), and manual shunt routes or ROL routes having been set (yellow routes). Banbury South shows the routes but not the colour of the signals. Banbury North doesn't show anything. This pattern is repeated across the network. Log in to reply |