Page 1 of 2
| Crewe SX 08 04 2015 17/04/2023 at 17:28 #151192 | |
headshot119
4869 posts |
Crewe SX 08 04 2015 This thread is for discussion of the Crewe SX 08 04 2015 timetable. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Crewe SX 08 04 2015 18/04/2023 at 12:44 #151235 | |
tjtbcork
75 posts |
Hi, Something up with the Decisions and rules for 4L81? At Seeding Decision 4L81 Seed chooses 4L81/H00325S not 4L81/H38937S Rule 4L81/H00325 must appear 48 Mins after 4L81/H00325S Leaves Rule 4L81/H38937 must appear 39 Mins after 4L81/H38937S Leaves Decision Coatbridge FLT 4L81 chooses 4L81/H38937 not 4L81/HH00325 4L81/H00325 can't enter because 4L81/H38937 is chosen 4L81/H38937 can't enter because 4L81/H38937S has not left the area Is the second decision redundant because of the rules? Tim. Log in to reply |
| Crewe SX 08 04 2015 18/04/2023 at 12:54 #151236 | |
|
Diesel Rider
62 posts |
Signal GL41 not clearing from red for train 1w78 from Shrewsbury. Route is set across the junction to grey triangle for crewe station. Train sits at signal and phones in. Stalk is lit but nothing happens. Save attached showing 1w78 at previous signal GL57 and route set. Great sim by the way. John Rowley Post has attachments. Log in to view them. Log in to reply |
| Crewe SX 08 04 2015 18/04/2023 at 13:01 #151237 | |
|
y10g9
895 posts |
Diesel Rider in post 151236 said:Signal GL41 not clearing from red for train 1w78 from Shrewsbury. Route is set across the junction to grey triangle for crewe station. Train sits at signal and phones in. Stalk is lit but nothing happens. Save attached showing 1w78 at previous signal GL57 and route set. Great sim by the way.Opening youre save game, you have set GL41 to the exit arrow on Gresty Lane correctly, however on Crewe South you need to set the other half of the route from the red arrow (CE111) to CE115. The half route is explained in the manual here Log in to reply The following user said thank you: Diesel Rider |
| Crewe SX 08 04 2015 18/04/2023 at 13:11 #151238 | |
|
y10g9
895 posts |
tjtbcork in post 151235 said:Hi,Mantis 38488 Applies. The second decision is for the trains entering at 2344. The departures from Basford Hall should not have the decision applied to them as they are goverened by which version seeds and the re entry rules Log in to reply |
| Crewe SX 08 04 2015 19/04/2023 at 08:35 #151262 | |
|
Diesel Rider
62 posts |
4S88 at SSN/SSMproblem as loco 0K88 detaches to go neck then arrival at basford hall no problem. 0S88 supposed to join from signal NH9/NH8 but as you can see in 2nd save a few seconds before it arrives to join 4S88 it says in F2 waiting for 4S88 then both move then wait moves and will never join. First save shows a few minutes beofre that with an awful lot of freight trying to stop and crewe change more or less at the same time at Basford Hall SSN/SSM. Is that normal? I have the default timetable 2007-215 supplied with sim and TORR, Extra ARS, Level Crossings on. AB internal and external are disabled. Any ideas what I am doing wrong? Thanks John Rowley Let it run a few more minutes and now the train is deciding to join. Weird Post has attachments. Log in to view them. Last edited: 19/04/2023 at 09:35 by Diesel Rider Reason: None given Log in to reply |
| Crewe SX 08 04 2015 19/04/2023 at 09:37 #151266 | |
|
y10g9
895 posts |
Diesel, I've run your 005511 SSG multiple times and the AC Loco eventually couples up after about a minute of doing the shuffle. Each time I restarted the save, the loco started to join to the wagons by 0057. Mantis 31244 has a report of the issue where when you have a powered train and a non powered train they end up doing a big shuffle to join to each other but I've never had them not eventually join Log in to reply The following user said thank you: Diesel Rider |
| Crewe SX 08 04 2015 19/04/2023 at 12:00 #151269 | |
|
Diesel Rider
62 posts |
I see on Gresty Lane Panel Dn Salop Goods Loop has Crewe TMd, but on Crewe PSB panel the same area shows Crewe TMD as D.E.D.with Crewe TMD above Platform 12. Is that correct and are they the same? Just wondering as cannot find D.E.D on south end towards heritage siding as you can phone either end. I assume it may be Crewe TMD which is blocked and collared. Thanks John Rowley Log in to reply |
| Crewe SX 08 04 2015 19/04/2023 at 16:15 #151275 | |
|
slatteryc
254 posts |
4S88 and 4V89 so far ( only up to 0230 ) drop a loco and a new one couples on at SSN/SSM . The new loco will not couple on (in both trains) unless the train 4xxx timetable is abandoned and then run to another timetable and pick it up again . Then it goes to "joining loco" and all is well. ( it's not a shunt forward thing, the F2 says of the LE that "train 4xxx in front" so its in the right place ) ( I see others have the same issue ) Last edited: 19/04/2023 at 16:17 by slatteryc Reason: None given Log in to reply |
| Crewe SX 08 04 2015 19/04/2023 at 16:25 #151277 | |
|
headshot119
4869 posts |
slatteryc in post 151275 said:4S88 and 4V89 so far ( only up to 0230 ) drop a loco and a new one couples on at SSN/SSM . The new loco will not couple on (in both trains) unless the train 4xxx timetable is abandoned and then run to another timetable and pick it up again . Then it goes to "joining loco" and all is well.Are you seeing the light loco and the train doing a shuffle in F2 of "Waiting for joining train 4S88 / Train 4S88 in front / Moving at 0mph (Or 3mph sometimes) " and repeat? If you just leave them be they will join after a couple of minutes. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Crewe SX 08 04 2015 19/04/2023 at 16:25 #151278 | |
GeoffM
6377 posts |
y10g9 in post 151266 said:eventually couples up after about a minute of doing the shuffleThere's a sharp curve there and there's a known issue joining trains on sharp bends... (Ok, I tried. It's true in real life, not so much in SimSig. Will investigate) SimSig Boss Log in to reply |
| Crewe SX 08 04 2015 19/04/2023 at 16:56 #151282 | |
jc92
3690 posts |
Ran it last night. 4S88 and 4M89 both changed without any issues (I wasn't hawking F2 so can't say how much shuttling occurred)
"We don't stop camborne wednesdays" Log in to reply |
| Crewe SX 08 04 2015 19/04/2023 at 17:05 #151283 | |
pedroathome
916 posts 
|
Diesel Rider in post 151269 said:I see on Gresty Lane Panel Dn Salop Goods Loop has Crewe TMd, but on Crewe PSB panel the same area shows Crewe TMD as D.E.D.with Crewe TMD above Platform 12. Is that correct and are they the same? Just wondering as cannot find D.E.D on south end towards heritage siding as you can phone either end. I assume it may be Crewe TMD which is blocked and collared.Good spot on this one. This is part of the display which is seen by both Gresty Lane and Crewe SCC signallers. Mantis 38502 Log in to reply The following user said thank you: Diesel Rider |
| Crewe SX 08 04 2015 19/04/2023 at 18:43 #151286 | |
BenWright
195 posts |
headshot119 in post 151277 said:slatteryc in post 151275 said:4S88 and 4V89 so far ( only up to 0230 ) drop a loco and a new one couples on at SSN/SSM . The new loco will not couple on (in both trains) unless the train 4xxx timetable is abandoned and then run to another timetable and pick it up again . Then it goes to "joining loco" and all is well.Are you seeing the light loco and the train doing a shuffle in F2 of "Waiting for joining train 4S88 / Train 4S88 in front / Moving at 0mph (Or 3mph sometimes) " and repeat? If you just leave them be they will join after a couple of minutes. Can confirm that's what happens Last edited: 19/04/2023 at 18:44 by BenWright Reason: None given Log in to reply The following user said thank you: headshot119 |
| Crewe SX 08 04 2015 19/04/2023 at 19:49 #151287 | |
|
slatteryc
254 posts |
Yes, that is the scenario. Because there is another train right behind it ( and I am used to this issue on New Street sim ) I just do what comes naturally - abandon tt and get it to pick up the tt again at the same time, then all well
Log in to reply |
| Crewe SX 08 04 2015 19/04/2023 at 20:12 #151289 | |
|
mfloyd
189 posts |
No issues with either join on either train with me, although as JC92 says, I wasnt watching the train list
Ripley, Derbyshire Log in to reply |
| Crewe SX 08 04 2015 20/04/2023 at 07:57 #151300 | |
flabberdacks
636 posts |
Because they eventually join, it isn't immediately obvious what's happening unless you are looking at the train list. I've experienced it myself on New Street sim, especially with all the joins on the 1990 timetable. I only noticed it because the New Street timetable can be so tight, I'm waiting for the 'joined' message and TRTS. A few of them took seemingly forever to join, and I started watching them in the train list. As mentioned earlier, Mantis 31244 covers it. Log in to reply |
| Crewe SX 08 04 2015 20/04/2023 at 10:10 #151302 | |
|
bill_gensheet
1420 posts |
Does not add much time.... 00:51:08 4S88 has finished dividing (run off 0K88, bring in 0S88) 00:57:32 4S88 has finished joining Also tried setting 0S88 to far end stop but still about 50 steps of waiting - in front - moving - waiting. (15 cycles or so) Log in to reply |
| Crewe SX 08 04 2015 20/04/2023 at 10:35 #151304 | |
|
Diesel Rider
62 posts |
Re 4s88 when joined and you send it to salp goods at the junction it says unidentified thing in berth and 4 stars so you just have to interpose 4s88 and it will go as normal. John Rowley Log in to reply |
| Crewe SX 08 04 2015 20/04/2023 at 18:49 #151317 | |
|
slatteryc
254 posts |
yes, same
Log in to reply |
| Crewe SX 08 04 2015 20/04/2023 at 19:25 #151321 | |
|
pedroathome
916 posts
|
Diesel Rider in post 151304 said:Re 4s88 when joined and you send it to salp goods at the junction it says unidentified thing in berth and 4 stars so you just have to interpose 4s88 and it will go as normal.Please can you attach a save game just prior to the issue occurring if you have one? James Log in to reply |
| Crewe SX 08 04 2015 20/04/2023 at 23:35 #151325 | |
|
bill_gensheet
1420 posts |
pedroathome in post 151321 said:Diesel Rider in post 151304 said:Appeared to me to be normal(ish) behaviour:Re 4s88 when joined and you send it to salp goods at the junction it says unidentified thing in berth and 4 stars so you just have to interpose 4s88 and it will go as normal.Please can you attach a save game just prior to the issue occurring if you have one? The 4S88 TD goes with the 0K88 light engine into the neck. That leaves the train without a TD, and 0S88 does not step in either as it is a shunt. So if then sent forward it will be a train without TD and report at the next TD step Last edited: 20/04/2023 at 23:36 by bill_gensheet Reason: None given Log in to reply |
| Crewe SX 08 04 2015 21/04/2023 at 08:04 #151334 | |
|
kbarber
1743 posts |
bill_gensheet in post 151325 said:pedroathome in post 151321 said:Agreed. As soon as the TC in advance of a clear signal occupies, the TD in the berth will step forward whatever the actual movement is. In real life the describer system is not linked directly to the trains, only to the signalling system, so it can't distinguish between an engine being released and the train going forward.Diesel Rider in post 151304 said:Appeared to me to be normal(ish) behaviour:Re 4s88 when joined and you send it to salp goods at the junction it says unidentified thing in berth and 4 stars so you just have to interpose 4s88 and it will go as normal.Please can you attach a save game just prior to the issue occurring if you have one? Pity the poor bobby in the days before these new-fangled 4-digit describers, when all the information consisted of a bell signal from the box in rear (repeated 3-2-5s if it was all freightliners), a timetable and (depending on local instructions) calls on the phone circuit to say what order everything was running in. Log in to reply |
| Crewe SX 08 04 2015 21/04/2023 at 20:14 #151363 | |
|
chrisdmadd
244 posts |
Never mind im an idiot.
Last edited: 21/04/2023 at 20:18 by chrisdmadd Reason: None given Log in to reply |
| Crewe SX 08 04 2015 22/04/2023 at 22:28 #151394 | |
|
Diesel Rider
62 posts |
4m89 as it his signal SG13 non described train in berth. Also 6m02 if you request slot for signal NH17 SSN as coming from harlescott crossing it flashes to accept but never goes solid white. Works perfrectly the other direction. John Rowley Post has attachments. Log in to view them. Log in to reply |