Page 1 of 1
Via buttons 03/12/2011 at 23:02 #24406 | |
djdeadman
![]() 7 posts |
Hi. I am unable to find the via buttons on the Euston sim. Can yo please tell me where they are. This looks an excellent sim but I am having trouble with these butons! Thanks to all for your hard work. David. David Deadman Log in to reply |
Re: Via buttons 03/12/2011 at 23:10 #24407 | |
agilchrist
![]() 258 posts |
Really ! on mine they are blue with a letter beside them. You cant see these, I think outside platform 10 there is the "A" button (from memory) Blessed are the true believers, for only they shall walk the Path, and they shall be welcomed unto the realm of the Ori and made as one with Them. Log in to reply |
Re: Via buttons 03/12/2011 at 23:14 #24408 | |
jc92
![]() 3649 posts |
a fair point (from a beginners point of view) is that there is no definition of via buttons or their use shown in the manual, the knowledge of their appearance and purpose is assumed
"We don't stop camborne wednesdays" Log in to reply |
Re: Via buttons 03/12/2011 at 23:31 #24409 | |
agilchrist
![]() 258 posts |
I suppose, it says to go from here to here you need buttons a/b/x etc..... But you then have to realise what the buttons actually are. In previous games got used to a blue arrow, but on this its a round blue button. Blessed are the true believers, for only they shall walk the Path, and they shall be welcomed unto the realm of the Ori and made as one with Them. Log in to reply |
Re: Via buttons 04/12/2011 at 07:33 #24414 | |
alvinhochun
![]() 249 posts |
One (or a few) of the signals are actually via buttons, am I right? It took me quite a long time to figure it out. It's the 5th or 6th signal from the rightmost.
Log in to reply |
Re: Via buttons 04/12/2011 at 08:48 #24415 | |
AndyG
![]() 1842 posts |
Via buttons (glossary) and display
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Last edited: 04/12/2011 at 08:50 by AndyG Log in to reply |
Re: Via buttons 04/12/2011 at 13:07 #24425 | |
maxand
![]() 1637 posts |
Added extra image of blue roundel to Wiki Signalling Display page, also added "Via Button" to description line. HTH.
Log in to reply |
Re: Via buttons 04/12/2011 at 14:40 #24429 | |
clive
![]() 2766 posts |
" said:a fair point (from a beginners point of view) is that there is no definition of via buttons or their use shown in the manual, the knowledge of their appearance and purpose is assumedVia buttons aren't new to Euston, so I didn't consider that they needed a lot of discussion. I did write: "You will notice 13 blue buttons in this area, labelled A to N. These are "via" buttons" and "click on the entrance signal, then the via buttons, then the exit signal" What's insufficient about that? Log in to reply |
Re: Via buttons 04/12/2011 at 14:41 #24430 | |
clive
![]() 2766 posts |
" said:In previous games got used to a blue arrow, but on this its a round blue button.Arrows are suitable when the via button can only be used in one direction. These are bidirectional. Log in to reply |
Re: Via buttons 04/12/2011 at 14:41 #24431 | |
clive
![]() 2766 posts |
" said:One (or a few) of the signals are actually via buttons, am I right?No. Log in to reply |
Re: Via buttons 04/12/2011 at 15:27 #24434 | |
TomOF
![]() 452 posts |
As has been said before, Via buttons are not a new concept in Simsig but where not too common. They only exist in complicated places and if you see them on SimSig then chances are that's because they exist in real life. New street also has via buttons which are needed to set routes. You need to think carefully about which way to send trains to their destation to avoid delaying subsequent trains. The same applies with Euston. Log in to reply |
Re: Via buttons 04/12/2011 at 20:36 #24450 | |
Steamer
![]() 3958 posts |
" said:" said:The signals require an overlap to be selected before the entry signal can clear, so while they may act a little bit like via buttons when a route is set to them, they are proper signals, and the exit arrows associated with them are for selecting which way the overlap goes: they do not set a route to another signal in the way they do everywhere else.One (or a few) of the signals are actually via buttons, am I right?No. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
Re: Via buttons 05/12/2011 at 13:38 #24477 | |
slatteryc
![]() 254 posts |
I have to say that after being so used to King's Cross not having to do the Via work, this causes some amount of exertion !
Log in to reply |
Re: Via buttons 05/12/2011 at 14:34 #24478 | |
postal
![]() 5216 posts |
" said:I have to say that after being so used to King's Cross not having to do the Via work, this causes some amount of exertion !The perils of trying to be true to life rather than having a game for the Playstation! “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
Re: Via buttons 05/12/2011 at 20:53 #24502 | |
Tristan
![]() 60 posts |
If memory serves me correcty there were 3 via buttons on Kings Cross, that were blue button type like Euston.
Log in to reply |
Re: Via buttons 05/12/2011 at 21:03 #24505 | |
headshot119
![]() 4869 posts |
" said:If memory serves me correcty there were 3 via buttons on Kings Cross, that were blue button type like Euston.You are quite correct. A for going into and out of platform 1. B for around platform 5. And C for platform 8 and 9. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Re: Via buttons 06/12/2011 at 00:37 #24528 | |
UKTrainMan
![]() 1803 posts |
" said:You are quite correct. A for going into and out of platform 1. 'fraid I don't think that is completely correct. Via button A is for trains on Fast Line 2 (Line A) going into Platform 1. Normally, you set the route from Signal 296 (K296) into Platform 1 and it'll set it via the long route, but if you set the route via Via button A then it'll go via the short route which crosses the line out of Platforms 2 and 3. I cannot see the use of it (Via button A) for trains leaving Platform 1. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
Re: Via buttons 06/12/2011 at 02:01 #24536 | |
BarryM
![]() 2158 posts |
I thought there was sufficient room for an engine to stand at sig. 287 but unfortunately there is no overlap. Strange! Barry Barry, Sydney, New South Wales, Australia Last edited: 06/12/2011 at 02:08 by BarryM Reason: edit my reply Log in to reply |
Re: Via buttons 06/12/2011 at 09:20 #24547 | |
headshot119
![]() 4869 posts |
" said:" said:For leaving via the short routeYou are quite correct. A for going into and out of platform 1. ![]() "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Re: Via buttons 06/12/2011 at 10:10 #24551 | |
Late Turn
![]() 697 posts |
The 'short route' in the Down direction from P1 is automatically selected if the route is set from 285 to 295 (an attempt to use the 'via' button will fail) as the other route requires a route set to 287 and then on from there. You only need to use the 'via' button in the up direction. But I think we all understood what the post meant. Log in to reply The following user said thank you: UKTrainMan |
Re: Via buttons 26/12/2011 at 19:41 #26203 | |
djdeadman
![]() 7 posts |
Thanks Agilchrist for a rather abrupt reply. I used to drive trains, not signal them! I would not reply like that to questions concerning my profession, if a member wanted any information no matter how obvious it would seem!
David Deadman Log in to reply |