Page 1 of 1
hungerford incorrect signal numbers 10/02/2010 at 23:45 #693 | |
casey jones
![]() 72 posts |
hi guys just running the westbury sim i had a track curcuit failure on the up westbury line protecting hungerford level crossing and noticed the signals on the up RK101 and RK104 down westbury are incorrect the signals are controlled signals from reading psb they should be R845 up wesbury and R856 on the down westbury the signals are cleared when the crossing keeper lowers the barriers cheer mick Log in to reply |
hungerford incorrect signal numbers 10/02/2010 at 23:45 #6600 | |
casey jones
![]() 72 posts |
hi guys just running the westbury sim i had a track curcuit failure on the up westbury line protecting hungerford level crossing and noticed the signals on the up RK101 and RK104 down westbury are incorrect the signals are controlled signals from reading psb they should be R845 up wesbury and R856 on the down westbury the signals are cleared when the crossing keeper lowers the barriers cheer mick Log in to reply |
hungerford incorrect signal numbers 11/02/2010 at 00:59 #6601 | |
UKTrainMan
![]() 1803 posts |
Could be a stab in the candlelit dark here but could this have something to do with it? [sub](see second section from the bottom)[/sub] Long shot but it could be?!! Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
hungerford incorrect signal numbers 11/02/2010 at 09:40 #6602 | |
casey jones
![]() 72 posts |
UKTrainMan said:Could be a stab in the candlelit dark here but could this have something to do with it? (see second section from the bottom) yep no probs i got that . cheers mick ps i never read instructions Log in to reply |
hungerford incorrect signal numbers 11/02/2010 at 11:34 #6606 | |
GeoffM
![]() 6344 posts |
In Kintbury crossing box the signals are identified as K104 etc, but in Reading they are identified as R856 etc. On the ground the signals are plated R856 etc. Kintbury slots the signals to Reading, allowing the signals to clear once the barriers are down and crossing clear. The decision was made in SimSig to reflect the fact that Kintbury is involved, hence the RK104 identification. The opinion of whether it's wrong really depends on whose perspective you are looking at which is why a compromise identity was chosen. SimSig Boss Log in to reply |
hungerford incorrect signal numbers 11/02/2010 at 18:31 #6610 | |
Mikey
![]() 15 posts |
And soon, someone will go out with a can of paint and spray on letter "T" on these signals to become TR856 etc.....
Log in to reply |
hungerford incorrect signal numbers 11/02/2010 at 19:11 #6611 | |
JamesN
![]() 1591 posts ![]() |
I was under the impression they were gonna be little stickers with "TR" on over the original R Mikey... ![]() Log in to reply |
hungerford incorrect signal numbers 12/02/2010 at 01:33 #6616 | |
casey jones
![]() 72 posts |
fair play geoff i only see the signal plates as a driver what ever signal plate number is shown the comunication is with the signal box at reading.i visit regular and all the signalmen or being trained at the new signalling centre at didcot on the simulator ARS etc at Reading is going to be a nightmare when it fullly opens new year time cheers mick Log in to reply |
hungerford incorrect signal numbers 12/02/2010 at 08:26 #6617 | |
Mikey
![]() 15 posts |
@ James: To be honest, I don't know how they are going to replate. I was just being a bit cheeky in suggesting that they spray paint the letter "T" on so that it is done on the cheap. I am sure that it will be a professional job done. Mick will be able to confirm this next month. Meanwhile, the moment these letter "T"s are being applied, many people on this forum wouldn't care less as they will be involved in a certain gathering in Peterborough. @Mick: Nightmare? It just depends on which approach you take to operating the IECC, like. I intend to avoid nightmares myself, and I am sure the others will too, like.... ![]() Log in to reply |
hungerford incorrect signal numbers 12/02/2010 at 10:48 #6618 | |
casey jones
![]() 72 posts |
I was down newbury-bedwyn last night with a trainee driver i was checking the signal numbers. When Reading Psb moves it will be a nightmare ive seen photos of the new signalling centre at didcot and Lavington to kintbury first stage soon then as far as theale.I guess geoff is fully involved with the design of the new workstations for the new box. Log in to reply |
hungerford incorrect signal numbers 12/02/2010 at 13:57 #6624 | |
TomOF
![]() 452 posts |
casey jones said:When Reading Psb moves it will be a nightmare I'm not sure why exactly. If properly planned and executed the move should go ahead with the minimum of fuss. casey jones said: I guess geoff is fully involved with the design of the new workstations for the new box. The new IECC style workstations are being provided by Delta Rail. The Berks and Hants line will be known as Workstation 4. It is one of the simulations that TRE are doing. Imagine flipping the layout upside down to Westbury SIMSIG and that's pretty much what it looks like. Trains on the first phase will appear on the Train describers when leaving Heywood Road Jn and Newbury. The second phase will go right past Theale to just before Reading West. To return to the Original point, There are some locations supervised by the crossing keepers with various slots needing to be given before signals will clear. Log in to reply |
hungerford incorrect signal numbers 12/02/2010 at 14:03 #6625 | |
Mikey
![]() 15 posts |
21st March: Heywood Road Jn - Hamstead LC (not quite Newbury) 25th April: Hamstead LC - Theale Sometimes in the summer (don't know exactly when): Cholsey and Goring & Streatley All of Reading Panel closed in Christmas period of December 2010 (bet you didn't know Christmas happens in December huh?) Log in to reply |
hungerford incorrect signal numbers 12/02/2010 at 15:43 #6628 | |
casey jones
![]() 72 posts |
thanks for the info the nigtmare bit is when the blockade starts a lot of diversions and movement of trains either side of the engineering works to keep some sort of service cheers mick Log in to reply |