Page 1 of 1
Track circuit length / sig171 placement at Streatham pl2 query 22/01/2015 at 15:42 #68282 | |
TimTamToe
![]() 658 posts |
Hi everyone Just doing the last bit off testing for a 2012 TT update on the Central. According to the diagrams I have, an 8 car 319 from Sutton is scheduled to reversal at Streatham platform 2 and go back to Sutton, however the train overhangs the shunt signal 171 and crossover and therefore is unable to reverse. I believe it should fit as train length is 164m and the platform around 190m. Is this a case of the track circuit length at Streatham platform 2 being too short in the sim? Gareth Log in to reply |
Track circuit length / sig171 placement at Streatham pl2 query 22/01/2015 at 18:40 #68289 | |
AndyG
![]() 1842 posts ![]() |
I reported an issue with 8 car non-reversing trains leaving their rear-end hanging out (forgive the vision!) fouling shunt 171, reported as fixed in V1.2, and issue closed out. Edit: try making the stopping position near end {exact}, see if that forces a reverser to tuck itself in behind 171. I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Last edited: 22/01/2015 at 18:42 by AndyG Log in to reply The following user said thank you: TimTamToe |
Track circuit length / sig171 placement at Streatham pl2 query 23/01/2015 at 04:00 #68299 | |
kaiwhara
![]() 587 posts |
" said:I reported an issue with 8 car non-reversing trains leaving their rear-end hanging out (forgive the vision!) fouling shunt 171, reported as fixed in V1.2, and issue closed out.Must admit I have noticed the same. My Vic Central is up to date (updated yesterday). Does this perhaps need to be revisited again? Andrew Sorry guys, I am in the business of making people wait! Log in to reply |
Track circuit length / sig171 placement at Streatham pl2 query 24/01/2015 at 00:27 #68325 | |
kaiwhara
![]() 587 posts |
" said:I reported an issue with 8 car non-reversing trains leaving their rear-end hanging out (forgive the vision!) fouling shunt 171, reported as fixed in V1.2, and issue closed out.Andy, tested again. All 319's at Streatham are overhanging the previous track circuit, train length of 164m. The issue is not resolved, and needs to be reopened. Andrew Sorry guys, I am in the business of making people wait! Log in to reply |
Track circuit length / sig171 placement at Streatham pl2 query 24/01/2015 at 10:37 #68335 | |
TimTamToe
![]() 658 posts |
" said:I reported an issue with 8 car non-reversing trains leaving their rear-end hanging out (forgive the vision!) fouling shunt 171, reported as fixed in V1.2, and issue closed out.Cheers Andy Near end exact stops its rear hanging out like a Kardashian! (I thought it was far end exact I needed :doh ) Gareth Log in to reply |
Track circuit length / sig171 placement at Streatham pl2 query 24/01/2015 at 13:39 #68338 | |
GeoffM
![]() 6344 posts |
" said:Near end exact stops its rear hanging out like a Kardashian!Hopefully SimSig trains are more pretty.... :whistle: (I don't find the Ks attractive at all but maybe that's just me) SimSig Boss Log in to reply |
Track circuit length / sig171 placement at Streatham pl2 query 24/01/2015 at 14:10 #68340 | |
JamesN
![]() 1591 posts ![]() |
" said:" said:Who would...Near end exact stops its rear hanging out like a Kardashian!Hopefully SimSig trains are more pretty.... :whistle: (I don't find the Ks attractive at all but maybe that's just me) Log in to reply |
Track circuit length / sig171 placement at Streatham pl2 query 24/01/2015 at 17:01 #68341 | |
TimTamToe
![]() 658 posts |
" said:" said:No not just you Geoff!Near end exact stops its rear hanging out like a Kardashian!Hopefully SimSig trains are more pretty.... :whistle: (I don't find the Ks attractive at all but maybe that's just me) Log in to reply |
Track circuit length / sig171 placement at Streatham pl2 query 25/04/2017 at 14:41 #94695 | |
bri2808
![]() 162 posts |
Apologies for bouncing an old thread but this still appears a problem and I cant see a way around it in the timetable I am playing. Any ideas please
Log in to reply |
Track circuit length / sig171 placement at Streatham pl2 query 25/04/2017 at 15:26 #94696 | |
AndyG
![]() 1842 posts ![]() |
bri2808 in post 94695 said:Apologies for bouncing an old thread but this still appears a problem and I cant see a way around it in the timetable I am playing. Any ideas pleaseAs I suggested upthread, and TimTamToe confirms it works, just edit the TT of any reversers at P2 to make it near end ( or near end exact), and the train should tuck its rear end behind the down starter signal. (If you wish, just sort the TT by exit location so any reversers appear together, or edit on the hoof before the train arrives.) I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply The following user said thank you: bri2808 |
Track circuit length / sig171 placement at Streatham pl2 query 25/04/2017 at 20:32 #94702 | |
bri2808
![]() 162 posts |
Thanks Andy, But put it simply I wouldn't have a clue how to do that so I think best bet is to remove the train, shouldn't have an adverse affect I guess
Log in to reply |