Page 3 of 5
| York North/South 18/05/2016 at 11:45 #82499 | |
headshot119
4869 posts |
" said:I noticed on viewing a very recent video of York Station in Youtube that platform 5 is actually split into 5a and 5b. This simulation seems to make no mention of this.The phone call list is set up so that you ring up for the end which the train will enter. So for the North Yard there are two options; "York Yard North (Y248)" and "York Yard North (Y253)". A train arriving into the Yard from Y243 will pass Y248 signal on the way in, and you need to ring up that end for permission. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| York North/South 18/05/2016 at 15:34 #82503 | |
Splodge
716 posts |
Not sure if it's even a bug (and it may have been mentioned) but on the post 2012 layout, Y201's auto button applies for moves into the Holgate HLG line (Y211) and not main line moves to Y205
There's the right way, the wrong way and the railway. Log in to reply |
| York North/South 18/05/2016 at 15:54 #82506 | |
GeoffM
6376 posts 
|
" said:Not sure if it's even a bug (and it may have been mentioned) but on the post 2012 layout, Y201's auto button applies for moves into the Holgate HLG line (Y211) and not main line moves to Y205Thanks - sort of was and this was the result: I picked the wrong route for auto working :doh Fixed ready for the next version. SimSig Boss Log in to reply |
| York North/South 18/05/2016 at 17:00 #82510 | |
Class 92
359 posts |
Not sure if this is a bug but I turned the ARS LColton sub-area off as I had a user using the Earfit Lane MWL but yet ARS still routed a train across the junction and crossing from signal 767 to 773.
Log in to reply |
| York North/South 18/05/2016 at 17:55 #82511 | |
|
GeoffM
6376 posts
|
" said:Not sure if this is a bug but I turned the ARS LColton sub-area off as I had a user using the Earfit Lane MWL but yet ARS still routed a train across the junction and crossing from signal 767 to 773.The Leeds lines over Colton North, and all of Colton South, are under the LCHFEFIT subarea; Colton Junction on the Main/Normanton and the Main lines over Colton North are under the LCOLTON subareas. Per real life. SimSig Boss Log in to reply |
| York North/South 18/05/2016 at 17:57 #82512 | |
|
Noisynoel
989 posts |
" said:" said:If you have someone using a crossing you should be putting reminders on the protecting signals as turning the ARS off doesn't stop you routing a train over it in errorNot sure if this is a bug but I turned the ARS LColton sub-area off as I had a user using the Earfit Lane MWL but yet ARS still routed a train across the junction and crossing from signal 767 to 773.The Leeds lines over Colton North, and all of Colton South, are under the LCHFEFIT subarea; Colton Junction on the Main/Normanton and the Main lines over Colton North are under the LCOLTON subareas. Per real life. Noisynoel Log in to reply The following user said thank you: DriverCurran |
| York North/South 18/05/2016 at 19:53 #82514 | |
|
Class 92
359 posts |
" said:" said:I normally would but this time decided to just turn off ARS as the indication that the crossing is occupied, luckily they got across in time. :whistle:" said:If you have someone using a crossing you should be putting reminders on the protecting signals as turning the ARS off doesn't stop you routing a train over it in errorNot sure if this is a bug but I turned the ARS LColton sub-area off as I had a user using the Earfit Lane MWL but yet ARS still routed a train across the junction and crossing from signal 767 to 773.The Leeds lines over Colton North, and all of Colton South, are under the LCHFEFIT subarea; Colton Junction on the Main/Normanton and the Main lines over Colton North are under the LCOLTON subareas. Per real life. Log in to reply |
| York North/South 18/05/2016 at 22:51 #82519 | |
DaveHarries
1285 posts |
I thnk I have just picked up an unreported bug. I have noticed that, if you try and interpose a train code on the Down Main platform at Northallerton then the code does not appear even if you enter one, which you can do. This occurs on both simulation eras. Dave Last edited: 18/05/2016 at 22:51 by DaveHarries Log in to reply |
| York North/South 18/05/2016 at 23:07 #82520 | |
|
Sacro
1171 posts |
" said:I thnk I have just picked up an unreported bug. I have noticed that, if you try and interpose a train code on the Down Main platform at Northallerton then the code does not appear even if you enter one, which you can do. This occurs on both simulation eras.Not a bug. It's a queue berth that applies to both signals. Log in to reply |
| York North/South 18/05/2016 at 23:09 #82521 | |
|
GeoffM
6376 posts
|
" said:I thnk I have just picked up an unreported bug. I have noticed that, if you try and interpose a train code on the Down Main platform at Northallerton then the code does not appear even if you enter one, which you can do. This occurs on both simulation eras.In reality there are two berths, 0467 and 0476. The IECC/SimSig display shows whichever is occupied (preferring 0467 if both occupied). You can use the signals to interpose and cancel. SimSig Boss Log in to reply |
| York North/South 20/05/2016 at 10:30 #82548 | |
Mattyq
259 posts |
Multi-playing game, 1P04 to Malton sitting at signal 217 (York P5) misrouted straight ahead. Player on South decided not to wait for the call and threw the road back. ACOA phone call sent to North player, not the south player.
Not fat ..... fluffy!! (G Iglesias) Log in to reply |
| York North/South 20/05/2016 at 10:58 #82550 | |
--miki--
68 posts |
In the top-left corner, there is text "TEL" which is definitely in wrong place, if it's supposed to exist.
Post has attachments. Log in to view them. Log in to reply |
| York North/South 20/05/2016 at 12:06 #82552 | |
|
y10g9
895 posts |
" said:In the top-left corner, there is text "TEL" which is definitely in wrong place, if it's supposed to exist.Already mentioned in posts #15&16 in this thread Log in to reply |
| York North/South 20/05/2016 at 14:47 #82553 | |
|
--miki--
68 posts |
" said:" said:Whoops, didn't notice... :whistle:In the top-left corner, there is text "TEL" which is definitely in wrong place, if it's supposed to exist.Already mentioned in posts #15&16 in this thread Log in to reply |
| York North/South 20/05/2016 at 20:17 #82556 | |
|
Ray
211 posts |
Going back to the youtube videos of York station, I notice that there is a wide empty space between platforms 3 and 5 and I was wondering if there was once additional roads, which fitted between these platform roads before the layout was rationalised.
Log in to reply |
| York North/South 21/05/2016 at 10:45 #82565 | |
|
peterb
452 posts |
Many thanks Geoff et al. for releasing another classic 'childhood' area. I know there will be many hours of enjoyment spent on it. A couple of things I would say which is almost a simulation request - I can't contribute any data etc but would there be the potential to simulate the mechanical boxes on the line to Scarborough? It would be fantastic to see this and could form part of a larger 'NE Yorkshire' sim down to Hull and back to Selby. With regard to chaining etc I noticed that the sim boundary here is Malton and not somewhere intermediate (i.e. Strensall). There are other locations between Malton and York (Haxby, Kirkham Abbey, etc) and I wondered why these weren't simulated if Malton was the exit point. Finally is there any reason why many trains 'terminate' when they leave the area of F4 and not 'exit'? Many thanks again for a great sim. Log in to reply The following user said thank you: Sacro |
| York North/South 21/05/2016 at 11:21 #82566 | |
|
Sacro
1171 posts |
" said:Many thanks Geoff et al. for releasing another classic 'childhood' area. I know there will be many hours of enjoyment spent on it.Malton was picked as it's a mandatory timing point (all trains have it in their timetable). The external box data is heavily simplified. Given there's nearly 40 crossings between Malton station and Scarborough Branch Jn there's a lot going on. Malton box itself has 25 crossings, all to the east of the station. Haxby is just a couple of CCTV crossings. Trains terminate because the location is not marked as 'external', Mantis 15353. Log in to reply |
| York North/South 21/05/2016 at 16:05 #82575 | |
|
GeoffM
6376 posts
|
" said:" said:I believe Peter is referring to the F4 option of sort by exit location. All locations that should be external are marked as such, otherwise the timetable analyser would have picked them up. 15353 summarily rejected.Finally is there any reason why many trains 'terminate' when they leave the area of F4 and not 'exit'?[...] Trains terminate because the location is not marked as 'external', Mantis 15353. 
SimSig Boss Log in to reply |
| York North/South 21/05/2016 at 16:22 #82576 | |
|
Sacro
1171 posts |
" said:" said:I did sort by exit location, I assumed that was the cause!" said:I believe Peter is referring to the F4 option of sort by exit location. All locations that should be external are marked as such, otherwise the timetable analyser would have picked them up. 15353 summarily rejected. :PFinally is there any reason why many trains 'terminate' when they leave the area of F4 and not 'exit'?[...] Trains terminate because the location is not marked as 'external', Mantis 15353. Log in to reply |
| York North/South 23/05/2016 at 19:18 #82607 | |
jc92
3685 posts
|
Something I've noticed is Springhall AHB's protecting signals have slots for Low Gates to release. Why is this the case for an AHB? I can only think it allows low gates to hold them at red if the crossing is faulty/blocked/other but I would have thought the slot would be left off 99% of the time with the signal clearing straight away, whereas it currently functions like an MCB. Also theres no apparent slotting arrangement for setting a route onto th LOS at Low gates. Does this reflect reality? "We don't stop camborne wednesdays" Log in to reply |
| York North/South 23/05/2016 at 21:04 #82610 | |
|
GeoffM
6376 posts
|
Springwell Lane telephones go to Low Gates which is presumably why it's slotted. As for the LOS, I haven't found a signaller who has ever used it and can thus explain the procedure. SimSig Boss Log in to reply |
| York North/South 23/05/2016 at 21:05 #82611 | |
|
jc92
3685 posts
|
http://photos.signalling.org/picture?/12717/category/1224-2008 Photo shows the slot in the off position without the route called. "We don't stop camborne wednesdays" Log in to reply |
| York North/South 24/05/2016 at 16:17 #82615 | |
|
Class 92
359 posts |
Not sure if this is a bug but when you set a route into the one of the platforms at York without using the warner route then the overlap sets correctly but then once the train has passed the signal if you set the route again using the warner route the overlap then drops to the warner over lap despite it not previously dropping out which means you could in a sense cheat the overlap out. I've noticed this will signal 300 to 222 and 213 to 223 but I think other signals may do it as well.
Log in to reply |
| York North/South 24/05/2016 at 16:38 #82617 | |
|
Danny252
1461 posts |
This occurs for every example I tried on York - and also examples I tried on other sims! For example, 329-331 on Wembley Mainline (Down Slow at Kensal Green) behaves the same. It therefore looks like this is, perhaps unsurprisingly, a core code issue.
Last edited: 24/05/2016 at 16:39 by Danny252 Log in to reply The following user said thank you: headshot119 |
