Page 1 of 1
| Brighton: warner route from 673 27/08/2011 at 22:37 #20235 | |
Forest Pines
525 posts |
Have come across something which I think might be a bug, although it's possibly a real life feature. I have a TC failure on the track immediately in advance of signal 677. Because of that, down trains entering Hove are being signalled on warner routes into the platform. If I set the warner route from 673 before that signal's berth track is occupied, the signal never seems to clear. However, if I set the warner route after the berth track has been occupied for a while, it clears immediately. In other words: a train can have been standing at 673 for a few minutes without the route clearing, and pulling and immediately resetting the same route will give an off signal. I've looked in the manual to see if this is an official feature, but it's not mentioned. It could of course be a Real-Life Feature that isn't mentioned in the manual. Log in to reply |
| Re: Brighton: warner route from 673 27/08/2011 at 22:52 #20236 | |
|
Forest Pines
525 posts |
(The same thing seems to happen at 675)
Log in to reply |
| Re: Brighton: warner route from 673 28/08/2011 at 07:56 #20247 | |
|
Firefly
521 posts |
This is definitely wrong. I'm guessing you have a route set from 677 and this is causing 673 to step up to a main class route and never clearing, however this shouldn't happen because the overlap must be clear for 673 to step up to a main class route. Quite why it works if the berth is occupied prior to 673 being set I have no idea. It's a definite bug. FF Log in to reply |