Page 1 of 1
| 0M05/6/7 15/04/2011 at 02:10 #2841 | |
michaeltrs
17 posts |
I might be missing something but these 3 trains I cannot make them re-appear from anchor sdgs? 0M06-0 goes in but never comes out, have tried with and without a phone call.
Log in to reply |
| 0M05/6/7 15/04/2011 at 02:10 #15109 | |
|
michaeltrs
17 posts |
I might be missing something but these 3 trains I cannot make them re-appear from anchor sdgs? 0M06-0 goes in but never comes out, have tried with and without a phone call.
Log in to reply |
| 0M05/6/7 15/04/2011 at 02:38 #15110 | |
|
indian_railways_fan
72 posts |
Yes I have had the same problem everytime at this place.The runaround loco never appears.As a stopgap I go to F4 TT and duplicate the loco and it appears immidietly.Though the original loco never appears. Also,for all I've searched,I can't find BSC Ent. C.Any trains having this location show wrong routes no matter what combination I try. Log in to reply |
| 0M05/6/7 15/04/2011 at 02:41 #15111 | |
|
Lardybiker
771 posts |
A phone call have no affect on whether a train re-appears on not. A bug has already been reported with the run around and the fix has already been added to the update version. Incidentally, BSC Ent C is at signal 353.
Log in to reply |
| 0M05/6/7 15/04/2011 at 03:09 #15112 | |
BarryM
2158 posts |
Go to timetables and delete the Rule for the particular loco and see what happens. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| 0M05/6/7 15/04/2011 at 05:51 #15114 | |
|
indian_railways_fan
72 posts |
I tried that at the very outset but to no avail.Anyway as Lardybiker has said,there is a bug.
Log in to reply |
| 0M05/6/7 15/04/2011 at 11:46 #15120 | |
|
Noisynoel
989 posts |
Right, a quick fix until the next release comes out. Open the TT editor via F4. All the loco's that appear from Anchor Sidings are currently shown with an entry time of 00:00. Change this to 00:01 and the rule will work and the train will enter as booked. However, you will need to do this when you first start the TT, NOT halfway through a game otherwise it won't work. Noisynoel Log in to reply |
| 0M05/6/7 15/04/2011 at 12:34 #15124 | |
58050
2659 posts |
Noel if you are writing a new timetable for South Humberside will you need this fix & also alter the times to 00:01, as I've got quite a few in my forth coming 1997-1998 timetable?
Log in to reply |
| 0M05/6/7 15/04/2011 at 13:52 #15132 | |
|
Noisynoel
989 posts |
If a train is shown entering the sim at 00:00 (Not this only applies to trains ENTERING) and also has a rule saying that it must not enter until x mins after y has done whatever you want it too, then it will not work. it MUST have an entry time, either 00:01 or however mins after the initial train leaves the sim
Noisynoel Log in to reply |
| 0M05/6/7 15/04/2011 at 13:59 #15133 | |
|
58050
2659 posts |
It's a good job this has been raised, will have to do some more editing then. Thanks for that Noel.
Log in to reply |
| 0M05/6/7 16/04/2011 at 02:37 #15142 | |
|
Jsun
212 posts |
On a related not trains going to the 38 signal to reverse onto the wagons at Scunthorpe call wrong route even though they are set the only way to access the reverse signal.
Log in to reply |
| 0M05/6/7 16/04/2011 at 04:13 #15143 | |
|
Lardybiker
771 posts |
This may have already been reported and fixed but I need to know the exact route set to verify that
Log in to reply |
| 0M05/6/7 17/04/2011 at 06:50 #15161 | |
|
BarryM
2158 posts |
Noisynoel said:However, you will need to do this when you first start the TT, NOT halfway through a game otherwise it won't work. Noel, I found it does work provided the related train in the rule has not entered the location concerned. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| 0M05/6/7 19/04/2011 at 08:51 #15227 | |
|
Jsun
212 posts |
Trains reversing at S38 call wrong route for S343/5-->S325 a main aspect, also for the call-ons S343/5--->S43.
Log in to reply |