Page 1 of 2
| Gloucester 2012 WTT 28/10/2012 at 15:10 #36999 | |
Steamer
3984 posts 
|
A new WTT for Gloucester, awaiting moderator approval. TT notes: A full WTT for Gloucester in the second half of 2012. Passenger CrossCountry operates frequent express services to Manchester, Nottingham, Cardiff, Scotland and the South West, along with First Great Western who operate 2-hourly HSTs to London Paddington. Between these, London Midland provide an hourly service between Birmingham and Worcester (and beyond), Arriva Trains Wales operate services between Cheltenham and Cardiff, and First Great Western provide local services to Worcester, Bristol and Swindon. Good regulation is needed to ensure that these all run with minimal delay, as well as the fairly frequent freight traffic. Freight At the start of the simulation, a light engine will leave the loco sidings. In it's description, it will say which day's WTT the freight traffic will run to.This, combined with quite a few 'Q' trains, means that the timetable should be different each time you play it. I have used guesswork for the type of traffic conveyed, and the length of freight trains. Lickey Banker: At the start of the TT, a loco will shunt from Bromsgrove sidings to the Banker Spur. When a train arrives that requires the banker, you must run the train standing in the spur to the relative timetable. For example, 6E49 show J:0E49 at Bromsgrove south. Therefore, when 6E49 enters the loop, use F2 to run the train in the banker spur (0B00 or 0Z99) to timetable 0E49. When the train arrives at Blackwell, the banker will detach (running as 0B00), and should be returned to the banker spur at Bromsgrove as soon as other traffic allows. The process then repeats for the next train that requires banking. I don't think this method of working is used now, but it's the easiest way to do it in the sim. If you encounter any bugs, or have problems/questions, please post them below. Enjoy! "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Gloucester 2012 WTT 28/10/2012 at 17:09 #37002 | |
|
Steamer
3984 posts
|
I've tried to upload it twice and I get the message "You must enter at least one recipient e-mail adress", however I can't see where I can write this on the submit file form. However, under this message, there is another saying "All done" and then a note saying that files are checked. Mods, has the upload worked, or can you not see it? Appologies if I've sent it twice.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Gloucester 2012 WTT 29/10/2012 at 23:38 #37031 | |
Underwood
748 posts |
Yes it will say that but it will have been sent. Congratulations on managing to upload it later than my submitted Peterborough V1.2, and you got yours uploaded first, I'm still waiting for my 1.2 to be approved so people have a fixed version  Anyway, I am off to give this TT a try! James. Log in to reply |
| Gloucester 2012 WTT 30/10/2012 at 00:11 #37032 | |
|
Underwood
748 posts |
One found already, 2G95-1 has a stop time at Horton Road, is that right? I had a call from the driver saying it will be delayed until 0035 due to assistance being given to a passenger :blink: :blink:  I then noticed a stop time is given here, don't know if it's supposed to be a pass time? Log in to reply |
| Gloucester 2012 WTT 30/10/2012 at 09:25 #37034 | |
|
Steamer
3984 posts
|
" said:One found already, 2G95-1 has a stop time at Horton Road, is that right?Probably someone a little too keen to get off at Gloucester! It should be a pass time, I'll correct it for the next version. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Gloucester 2012 WTT 30/10/2012 at 14:16 #37041 | |
|
Underwood
748 posts |
A bit keen! lol A couple more: - 0E20 has no join code for 6E20, though I haven't tried the other banker moves with J:xxx in them won't couple up to the trains properly anymore, though I believe there is a workaround I just removed the banker altogether and abandoned joins/detaches from the trains. - 0Z01-TH ran for Thursdays, but 6M03 runs with 'FO' in the description, is that correct? Cheers, James. Log in to reply |
| Gloucester 2012 WTT 30/10/2012 at 15:56 #37047 | |
|
Steamer
3984 posts
|
" said:- 0E20 has no join code for 6E20, though I haven't tried the other banker moves with J:xxx in them won't couple up to the trains properly anymore, though I believe there is a workaround I just removed the banker altogether and abandoned joins/detaches from the trains. Which trains were affected? I had problems during testing with trains which overhang the points to the Unitank sidings, and I thought I had shortened everything so that they didn't overhang. Underwood said: No it isn't, some rules missing there. Thanks for the bug reports, keep 'em coming! "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 02:22 #37101 | |
|
Underwood
748 posts |
Up to 0610 and a couple of minor things, very quick fixes you'll be glad to hear! - 6M81 has no '-' between Margam TC and Round Oak, pedantic maybe but it just looks like one place name otherwise lol - As for 6V74, there is no 'E' in Bridgwater! :angry: :lol: Sorry, just when it is spelt with an 'e', it drives me up the wall! I don't live or never have lived there, probably just because I'm a westerner 
Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 13:18 #37106 | |
|
Steamer
3984 posts
|
" said:- 6M81 has no '-' between Margam TC and Round Oak, pedantic maybe but it just looks like one place name otherwise lolDuly noted. Underwood said: - As for 6V74, there is no 'E' in Bridgwater!Umm, I think you'll find there is! Just kidding, I'll correct it. Thanks for all the reports, and for being so observant! "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 01/11/2012 at 13:21 by Steamer Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 13:50 #37107 | |
|
WesternChampion
173 posts |
Trouble over Bridgwater?
Log in to reply The following user said thank you: guidomcc |
| Gloucester 2012 WTT 01/11/2012 at 20:26 #37143 | |
|
AlexH
161 posts |
Interesting timetable, thank you to the author. I have one slight problem, which is quite possibly more of a simulation problem than a function of the timetable. I train 6E49 waiting in Bromsgrove Loop for its banking engine. I assigned the relevant timetable to the loco waiting in the spur (which started off facing the wrong way in case that's important) and off it went to meet the train awaiting its arrival in the loop. However, it now claims that train 6E49 is in front and won't do anything. Could anyone suggest a work around. Incidentally, it's meant to be running a Friday timetable, and train 6E80 has turned up, which is a MO train. Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 20:37 #37144 | |
jc92
3685 posts
|
" said:Interesting timetable, thank you to the author.tell it to run to another TT and step it up to its final destination, that should fix it "We don't stop camborne wednesdays" Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 20:44 #37145 | |
|
AlexH
161 posts |
Tried that, no banana.
Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 20:51 #37146 | |
postal
5264 posts
|
Just in case - have you checked that the TT for 6E49 is showing the current location as Bromsgrove Loop. Unless the train and the banker are both showing the joining point as their current locations, the join won't work. It's a long shot but it might be worth a quick look. If that fails, can you upload a saved game so that someone else can cast a different eye over things to try and solve it.
“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 20:53 #37147 | |
|
AlexH
161 posts |
Thanks for the replies. They are both saying that they are at the same location. I have tried setting the loco to run to different timetables etc to no avail. This is doubtless a stupid question, but which file is it that I need to upload? And to where do I upload it?
Last edited: 01/11/2012 at 20:54 by AlexH Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 20:54 #37148 | |
|
Steamer
3984 posts
|
" said:I train 6E49 waiting in Bromsgrove Loop for its banking engine. I assigned the relevant timetable to the loco waiting in the spur (which started off facing the wrong way in case that's important) and off it went to meet the train awaiting its arrival in the loop. However, it now claims that train 6E49 is in front and won't do anything.F2> right-click 0E49> Timetable options> Edit timetable. Click on the last line of the timetable, and click 'set next/current location. Ensure that the train is pointing in the Up direction, and it should join. AlexH said: Incidentally, it's meant to be running a Friday timetable, and train 6E80 has turned up, which is a MO train.Thanks, that's a TT problem that I'll sort out, let me know if you get any other trains that don't run on Fridays. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 21:04 #37149 | |
|
AlexH
161 posts |
Tried that a few times now, and still cannot persuade them to join.
Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 21:14 #37150 | |
|
Steamer
3984 posts
|
Can you save the game and attatch the save file to a forum post? The file is saved in the Program Files>SimSig>Gloucester folder and will have the suffx .SSG
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 01/11/2012 at 21:14 by Steamer Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 21:31 #37151 | |
|
AlexH
161 posts |
I'm sorry to be dense, but when I try look in the Gloucester folder I only see WTR and WTT and photos available. And yet I save the simulation every time as an SSG in the same folder. Where does it go??
Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 21:31 #37152 | |
|
MikeW
65 posts |
There is actually a typo in the action for two of the banker locos (so far) - they are instructed to join to themselves rather than to the train. They are 0M94-2 and 0E50-2, which have J:0M94-2 or J:0E50-2 in the action field, instead of J:6M94-2 or J:60E50-2. Easily done and easily missed! Mike (up to about 1300 so far) Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 21:41 #37153 | |
|
Steamer
3984 posts
|
" said:I'm sorry to be dense, but when I try look in the Gloucester folder I only see WTR and WTT and photos available. And yet I save the simulation every time as an SSG in the same folder. Where does it go??Check your Public Documents folder- it may be there. Failing that, try searching the C drive for the file name. MikeW said: There is actually a typo in the action for two of the banker locos (so far) - they are instructed to join to themselves rather than to the train. They are 0M94-2 and 0E50-2, which have J:0M94-2 or J:0E50-2 in the action field, instead of J:6M94-2 or J:60E50-2.Oops! Thanks for that, I'll fix them "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 21:42 #37154 | |
|
jc92
3685 posts
|
" said:I'm sorry to be dense, but when I try look in the Gloucester folder I only see WTR and WTT and photos available. And yet I save the simulation every time as an SSG in the same folder. Where does it go??it will only be viewable if "compatability files" is ticked on the browser box "We don't stop camborne wednesdays" Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 22:17 #37155 | |
|
AlexH
161 posts |
I hope this is the right file. I couldn't find the right button the attach file box, but I found it in the regular My Computer box and copied them over to the main registry. Sorry for the bother, colossal hang over. I'm sure someone will find an obvious problem with that I was doing. Post has attachments. Log in to view them. Log in to reply |
| Gloucester 2012 WTT 01/11/2012 at 22:43 #37156 | |
|
Steamer
3984 posts
|
" said:Sorry for the bother, colossal hang over. I'm sure someone will find an obvious problem with that I was doing.Spotted the problem- my fault not yours. 0E49 had the join location set as Bromsgrove, not Bromsgrove (south). To fix it, Edit the timetable via F2, and change the location to Bromsgrove (south) "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following user said thank you: AlexH |
| Gloucester 2012 WTT 02/11/2012 at 10:51 #37165 | |
|
John
884 posts |
I have 6M57-1 at Barnwood Jcn Up Goods Loop from 06.26 until 08/08. I now have 6E50-1 wanting the Up Goods Loop between 07.37 and 08/08... ...plus 6M57-2 dwelling at Barnwood Jcn between 07.36 and 08/07 (tt does not specify the UGL). Log in to reply |