Page 1 of 1
Can anybody explain this? 09/04/2013 at 09:23 #43215 | |
Rickurd
![]() 128 posts |
I was playing Brighton and I got this error message. I thought it was a bit odd so I went back to the previous snapshot, and it happened again. Rick. Post has attachments. Log in to view them. Log in to reply |
Can anybody explain this? 09/04/2013 at 10:40 #43220 | |
jimgos2005
![]() 129 posts |
I have had those a few times I normally save game log out and log back in to the sim or ignore them
Log in to reply |
Can anybody explain this? 09/04/2013 at 10:42 #43221 | |
Rickurd
![]() 128 posts |
A few trains stopped dead when it happened though, even though it said they were moving via F2, there wern't
Log in to reply |
Can anybody explain this? 09/04/2013 at 10:56 #43224 | |
alvinhochun
![]() 249 posts |
" said:I thought it was a bit odd so I went back to the previous snapshot, and it happened again. It might be a good idea to upload your "previous snapshot" so that we can see if we get the problem. Log in to reply |
Can anybody explain this? 09/04/2013 at 11:01 #43226 | |
Rickurd
![]() 128 posts |
Good idea
Post has attachments. Log in to view them. Log in to reply |
Can anybody explain this? 09/04/2013 at 15:39 #43237 | |
vontrapp
![]() 210 posts |
See this topic: http://www.SimSig.co.uk/index.php?option=com_kunena&view=topic&catid=38&id=34830&Itemid=0 Log in to reply |
Can anybody explain this? 10/04/2013 at 12:49 #43271 | |
Rickurd
![]() 128 posts |
I tried the snapshot again this morning, and the error seems to be happen as soon as 1H31 finishes joining.
Log in to reply |
Can anybody explain this? 10/04/2013 at 17:53 #43285 | |
jwsetford
![]() 164 posts |
Maybe your not aloud to set a route for a train while its joining. Occasionally if your joining you'll have a red, yellow or double yellow. just depends what type of signaler is on. ![]() Log in to reply |
Can anybody explain this? 10/04/2013 at 17:54 #43286 | |
Rickurd
![]() 128 posts |
" said:Maybe your not aloud to set a route for a train while its joining. Occasionally if your joining you'll have a red, yellow or double yellow. just depends what type of signaler is on. ;)I had the route set becasue he was late, and I wanted him to depart sharpish ![]() Log in to reply |
Can anybody explain this? 10/04/2013 at 18:11 #43289 | |
Lardybiker
![]() 771 posts |
Whether a train is joining or not has no bearing on whether you are allowed to set a route or not.
Log in to reply |
Can anybody explain this? 11/04/2013 at 01:25 #43305 | |
BarryM
![]() 2158 posts |
Richard, I could not get the snapshot to produce the message. I have seen this error message elsewhere and I believe it could be a result of too many "windows" open at the one time. I notice you have a big clock in the background. Try running the snapshot with the minimum number of windows and other programs required to be open and see if the message occurs. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
Can anybody explain this? 11/04/2013 at 06:38 #43306 | |
alvinhochun
![]() 249 posts |
That clock is just a desktop gadget. IIRC, I played sims with ten Chrome windows (not simply tabs), a few Windows Explorer windows and Eclipse opened at a time but never saw this error message. A bit searching on Google seems that most people encountered this problem when writing Delphi programs (and SimSig is written in Delphi). Usually some code just set disabled or hid a control and then try to call SetFocus on it will cause this exception, so there may be a few buggy lines of code in SimSig that is doing that. (Or just blame Delphi, because it could just silently ignore the call to SetFocus if the control is hidden or disabled instead of telling Windows to set focus and causing an error which make Delphi throws an exception.) Anyway, according to a reply by Hpotter of the post linked by vontrapp, it should already be fixed in the core code and should not happen again in future release (let's say not long from now), I guess. Log in to reply |
Can anybody explain this? 11/04/2013 at 15:03 #43323 | |
jwsetford
![]() 164 posts |
I once had 37 other windows open, (12 google chromes with about 20 tabs,) and no problems. josh. Log in to reply |
Can anybody explain this? 11/04/2013 at 16:41 #43328 | |
Late Turn
![]() 697 posts |
" said:Maybe your not aloud to set a route for a train while its joining. Occasionally if your joining you'll have a red, yellow or double yellow. just depends what type of signaler is on. ;) Just picked up on this, and - noting Lardybiker's reply - I'm a little perplexed! If a second train has been signalled into a platform, and it's had time to come to a stand, the interlocking can't possibly know whether it's joining what's already in there or merely sharing a platform with it. There's nothing, then, to stop the platform starter (in both directions if you want) showing a proceed aspect - whether that's Y, YY or G depends on the state of subsequent signals and has very little to do with the Signalman's mood! Obviously Huddersfield Control might apply if the second train is still in the process of being signalled in, but that doesn't sound like what's going on here. I'm guessing and hoping you're not referring to the signal in rear of the platform clearing for the second train - which, under those circumstances, certainly shouldn't clear to a yellow! Tom Log in to reply |
Can anybody explain this? 11/04/2013 at 16:44 #43329 | |
Rickurd
![]() 128 posts |
" said:Richard,I doubt its related to the number of windows I have open, as I would have thought that would cause general slowdowns/RAM issues as well as issues in other programs as well, and I can assure you I have no issues with lack of RAM ![]() Log in to reply |
Can anybody explain this? 11/04/2013 at 17:44 #43333 | |
GeoffM
![]() 6344 posts ![]() |
I forget the actual cause but simply something to do with Delphi trying to activate a window that wasn't visible. Nothing to do with the number of windows open. If the sim is still running quite happily then you can ignore the warning.
SimSig Boss Log in to reply The following users said thank you: Rickurd, BarryM |
Can anybody explain this? 11/04/2013 at 18:02 #43335 | |
Rickurd
![]() 128 posts |
" said:I forget the actual cause but simply something to do with Delphi trying to activate a window that wasn't visible. Nothing to do with the number of windows open. If the sim is still running quite happily then you can ignore the warning.Thanks Geoff Log in to reply |
Can anybody explain this? 12/04/2013 at 02:02 #43341 | |
BarryM
![]() 2158 posts |
" said:" said:.Richard,I doubt its related to the number of windows I have open, as I would have thought that would cause general slowdowns/RAM issues as well as issues in other programs as well, and I can assure you I have no issues with lack of RAM :) Richard, I was not referring to RAM/slowdowns. I am interested to know what was the result of running the snapshot from a clean boot? Did you still get the error? Barry Barry, Sydney, New South Wales, Australia Log in to reply |
Can anybody explain this? 12/04/2013 at 13:52 #43346 | |
Rickurd
![]() 128 posts |
" said:" said:I get the error both from a clean boot and if I run it when the PC on has been on a few hours" said:.Richard,I doubt its related to the number of windows I have open, as I would have thought that would cause general slowdowns/RAM issues as well as issues in other programs as well, and I can assure you I have no issues with lack of RAM :) Log in to reply |
Can anybody explain this? 12/04/2013 at 15:10 #43353 | |
Danny252
![]() 1461 posts |
The cause of the error has already been stated by Geoff (who also said it is now solved), so I'm not sure what Barry and Rickurd are trying to find?
Log in to reply |
Can anybody explain this? 12/04/2013 at 19:23 #43391 | |
vontrapp
![]() 210 posts |
Neither could I!
Log in to reply |
Can anybody explain this? 12/04/2013 at 19:24 #43392 | |
vontrapp
![]() 210 posts |
" said:Richard,Neither could I! Last edited: 12/04/2013 at 19:24 by vontrapp Log in to reply |
Can anybody explain this? 13/04/2013 at 00:19 #43405 | |
BarryM
![]() 2158 posts |
" said:The cause of the error has already been stated by Geoff (who also said it is now solved), so I'm not sure what Barry and Rickurd are trying to find?Solved!? Why does Richard get the message and I and others do not. May be other Delphi programs running? There is more in it than the explanation above. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
Can anybody explain this? 14/04/2013 at 13:01 #43439 | |
Rickurd
![]() 128 posts |
I'm going to try running in a clean OS on a virtual machine to see if there is a software conflict somewhere :) I shall report back my findings Log in to reply |
Can anybody explain this? 14/04/2013 at 15:17 #43445 | |
Rickurd
![]() 128 posts |
On a clean install I got no error.
Log in to reply |