Page 1 of 1
Signalling in Rio. 24/10/2013 at 00:19 #50301 | |
CTCThiago
![]() 232 posts |
Here some old pictures from signal box already out of use:
Post has attachments. Log in to view them. Last edited: 24/10/2013 at 00:20 by CTCThiago Log in to reply The following user said thank you: Temple Meads |
Signalling in Rio. 24/10/2013 at 00:26 #50302 | |
CTCThiago
![]() 232 posts |
Another from the new system installed (ERTMS Level 1) balise (White) and some screenshot of the new panel.
Post has attachments. Log in to view them. Last edited: 24/10/2013 at 00:35 by CTCThiago Log in to reply The following users said thank you: Temple Meads, GeoffM |
Signalling in Rio. 24/10/2013 at 10:32 #50308 | |
kbarber
![]() 1723 posts |
I'm trying to work out the mode of operation of the old panel. There's not enough switches, I suspect, for it to be One Control Switch or Individual Function Switch, and in any case it doesn't look very logically laid out for such a panel. Also, it would seem unusual to have buttons rather than two position switches for such working (I know London Underground OCS panels of the early 1960s were an exception, but they were laid out very differently). On the other hand, the buttons don't seem to be laid out in a way that I'd expect for eNtrance-eXit working. Do you have any further information about this system? Or do you know who the manufacturer was? The oldest of all looks like a GRS slide frame; our Great Western Railway installed a number of them in the 1930s, including a very large example at Bristol Temple Meads East. Log in to reply The following user said thank you: CTCThiago |
Signalling in Rio. 24/10/2013 at 20:43 #50326 | |
CTCThiago
![]() 232 posts |
" said:Not at the moment, but i'll let you know about it in some days ![]() Log in to reply The following user said thank you: kbarber |
Signalling in Rio. 25/10/2013 at 04:06 #50331 | |
CTCThiago
![]() 232 posts |
Here are some more pics:
Log in to reply |
Signalling in Rio. 25/10/2013 at 12:42 #50337 | |
maxand
![]() 1637 posts |
Interesting pics, thanks. Maybe the forum mods could move this topic to The real thing (signalling) - would make it easier to find in future. (And then delete my post). Log in to reply |
Signalling in Rio. 09/11/2013 at 13:46 #51153 | |
Mattyq
![]() 259 posts |
" said:I'm trying to work out the mode of operation of the old panel. There's not enough switches, I suspect, for it to be One Control Switch or Individual Function Switch, and in any case it doesn't look very logically laid out for such a panel. Also, it would seem unusual to have buttons rather than two position switches for such working (I know London Underground OCS panels of the early 1960s were an exception, but they were laid out very differently).It could be a "Station selector" type panel. Not sure if they were ever used in the UK. Just in case they were not, I'll explain how they work. Each interlocking location has a generic signal/point/release numbering system. For example, every Down Home signal is numbered '27'. At each actual location, the signal ID plate for the Down Home will show '27' prefixed by the location mnemonic. Therefore, the Down home at Able would be AE27 whereas the Down Home at Beta is BA27. On the control panel, each location has a selector button. To operate the signalling equipment at Beta, you would press the button for Beta. You then use the numbered buttons to clear/restore signals and manipulate points at that location. Therefore, to clear signal BA27 across No.12 point in Normal, you press 'BA' then 12N, then 27. Some more advanced (for the era) panels may have through setting buttons as well. Not fat ..... fluffy!! (G Iglesias) Log in to reply The following user said thank you: kbarber |
Signalling in Rio. 12/11/2013 at 09:57 #51397 | |
clive
![]() 2766 posts |
" said:That looks plausible. Each station on the diagram seems to have the same signal and points numbers. Log in to reply |
Signalling in Rio. 12/11/2013 at 10:41 #51399 | |
kbarber
![]() 1723 posts |
" said:" said:I'm trying to work out the mode of operation of the old panel.It could be a "Station selector" type panel. Not sure if they were ever used in the UK. Just in case they were not, I'll explain how they work. Many thanks for this. I don't think such a beast was ever used here (I'm open to correction & I'm pretty sure I will be if wrong). Interesting way to do things. And full of traps for the unwary, by the sound of it. Did the station selection release automatically, either by clearing of a signal or after a time lapse? Or by any other means? Or was it simply unselected by selecting another station? I imagine it would tend to be used in areas that were relatively lightly trafficked (by UK standards anyway)? I can imagine it becoming quite fraught at times if there's multiple manoeuvres in progress at multiple locations. Log in to reply |
Signalling in Rio. 24/06/2015 at 14:01 #73657 | |
Mattyq
![]() 259 posts |
" said:" said:Firstly, sorry for the late response to this. I only just discovered the replies to my response." said:I'm trying to work out the mode of operation of the old panel.It could be a "Station selector" type panel. Not sure if they were ever used in the UK. Just in case they were not, I'll explain how they work. I do know that "Station Selector" type panels were used in Queensland for QR's first generation CTC panels. This was all single line and crossing loop type territory in rural area with a dominance on freight traffic and a smattering of inter-regional passenger traffic. I believe this is one of the panels in question:- ![]() (Photo courtesy QR) The signal/point controls are the black panel on the centre stand between the two Controllers. These were decommissioned before my time so never got to see any in use. For the record, these panels were operated by Train Controllers, not Signallers. I did, however, get to see a small one in use in Sunshine signal box in Melbourne. ![]() (Photo courtesy Chris Gordon/Vicsig) This was quite an interesting panel as it had two divisions, each being operated in different ways. The top half, Albion Jn was an IFS panel, the switches and buttons being at the left-hand end of the control desk. The bottom half controlled about 4 locations between Sunshine (bottom right) and Deer Park West (bottom left). This was "Station Selector" operation, the controls of which are closest the photogrpaher. On the track diagram, there was a white lamp near the station name to show that station was on control mode. The station selected would remain selected until the next station was selected. As you can see in the photo, Deer Park is selected. This is one of two panels in Sunshine Box and has since been decommissioned. The other, an IFS panel, is still in use. Not sure where else they were used in Australia, but I have a funny feeling the NSW CTC panel that controlled Aberdeen to Werris Ck was of the "Station Selector" type too. Maybe "Sparky" can enlighten us? Post has attachments. Log in to view them. Not fat ..... fluffy!! (G Iglesias) Last edited: 24/06/2015 at 14:06 by Mattyq Reason: Additional info Log in to reply |