Page 1 of 2
Signal 822 and Canal wharf slot 18/07/2014 at 21:28 #62858 | |
jc92
![]() 3653 posts |
I have the slot for 6V78 to run to Acton Canal Wharf, and it has come to a stand at signal 822. the sim is insisting points are locked reverse by another route, but I have cancelled all obvious conflicting routes
"We don't stop camborne wednesdays" Log in to reply |
Signal 822 and Canal wharf slot 18/07/2014 at 22:35 #62864 | |
kaiwhara
![]() 587 posts |
I too have had this issue.
Sorry guys, I am in the business of making people wait! Log in to reply |
Signal 822 and Canal wharf slot 19/07/2014 at 10:02 #62875 | |
tjfrancis
![]() 358 posts |
me to but for 6x10
I am dyslexic so please consider this when reading my posts Log in to reply |
Signal 822 and Canal wharf slot 19/07/2014 at 12:20 #62878 | |
GW43125
![]() 495 posts |
Also experiencing this issue with several trains. Believe there may be a minor bug in the sim, but feel free to correct me if wrong. Also, in the default TT, several class 1 royal mail trains call in complaining they're being routed onto a goods line, even though they're booked there. Apologies if it is just myself making mistakes, but it would be much appreciated if someone could have a look into it. Thanks, Jamie. Log in to reply |
Signal 822 and Canal wharf slot 19/07/2014 at 15:46 #62880 | |
Noisynoel
![]() 989 posts |
The goods line bug was fixed in the latest version of the loader. Have you clicked "check for updates" on the loader front screen? The Acton issue is new and certainly wasn't present when the timetable was tested earlier this week. Any chance of a save from someone experiencing issues. Noisynoel Log in to reply |
Signal 822 and Canal wharf slot 19/07/2014 at 17:29 #62885 | |
madaboutrains
![]() 314 posts |
Same problem when I played earlier
RIP Feltham Panel 1 Log in to reply |
Signal 822 and Canal wharf slot 19/07/2014 at 18:22 #62888 | |
chrisinphoenix
![]() 1 posts |
Here's a save of the problem. Trying to route 6X10 to Action Canal Wharf.
Post has attachments. Log in to view them. Log in to reply |
Signal 822 and Canal wharf slot 19/07/2014 at 18:35 #62889 | |
Stephen Fulcher
![]() 2055 posts |
Save file is from 4.1.2 which is the correct version of the Loader. It is also fairly unlikely that so many users, especially at least one experienced one, would all fail to update the loader. Just playing with the save game attached to this thread, there is a definite bug here. The slot has been granted by ACW, all the points are in the correct position, but when attempting to set a route it states that points are locked in the opposite position in the message box. My guess is that the points concerned are some off-sim ones at ACW. Ticket number 11155 applies. Log in to reply |
Signal 822 and Canal wharf slot 19/07/2014 at 20:17 #62890 | |
jc92
![]() 3653 posts |
its probably worth adding that 924 and 1198 are also affected by this, so I would support Stephens Theory that this is off scene.
"We don't stop camborne wednesdays" Log in to reply |
Signal 822 and Canal wharf slot 19/07/2014 at 21:41 #62894 | |
GW43125
![]() 495 posts |
" said:The goods line bug was fixed in the latest version of the loader. Have you clicked "check for updates" on the loader front screen?I have the latest loader version, though this does still occur. Any help would be appreciated. Thanks, Jamie. Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 07:22 #62904 | |
Giantray
![]() 342 posts |
Can confirm have had the same issue with 6V78. Lastest Uploader installed, points locked, slot obtained, states that a set of pointsin another route are locked reverse. Only way out with a route setting failure, set points for route concerned and flag train passed the signal. However, when performing this task, 6V78 goes around towards Acton Canal Wharf but stops on ACW21 and sits there forever more! Professionalism mean nothing around a bunch of Amatuer wannabees! Last edited: 20/07/2014 at 07:36 by Giantray Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 08:38 #62909 | |
Stephen Fulcher
![]() 2055 posts |
Does the train list say "points set against train" when the train stands at ACW?
Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 09:09 #62912 | |
Giantray
![]() 342 posts |
Sorry didn't look. However just come across another issue in the same area. Trying to put 1j84 into The Euroterminal from 822 signal, again slot has been obtained and route won't set. This time it states points are locked NORMAL by another route (as opposed to REVERSE when trying to set from 822 to Acton Canal Wharf). Professionalism mean nothing around a bunch of Amatuer wannabees! Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 10:58 #62918 | |
welshdragon
![]() 315 posts |
Can confirm the above issue does occur with the Public release. Mr Fulcher has posted this on the internal bug board. Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 17:52 #62944 | |
slatteryc
![]() 254 posts |
Same issue here with 6X10. This occurs fairly early on around 00:43 for me so it is hit fairly quickly !
Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 17:59 #62946 | |
Stephen Fulcher
![]() 2055 posts |
Looks like it will happen every time.
Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 19:01 #62947 | |
Jay_G
![]() 54 posts |
I just joined a sim. 6L51 sat in SW sidings. The loco appeared (0L51) but was unable to signal the loco onto the train, kept getting Subroute locked in opposite direction, despite setting the route in the opposite direction and cancelling it
Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 22:44 #62956 | |
jeffh16
![]() 40 posts |
it seems to be related to the Single Ended set of points from the down line onto the branch, as the sim claims that "points locked by <current position of that set of points>" i found this out by manually operating each set of points in the route.
Log in to reply |
Signal 822 and Canal wharf slot 20/07/2014 at 23:15 #62957 | |
Tempest Malice
![]() 122 posts |
" said:it seems to be related to the Single Ended set of points from the down line onto the branch, as the sim claims that "points locked by <current position of that set of points>" i found this out by manually operating each set of points in the route.Just testing those points (P2444) I get the same result, error message is dependant on those points's position so I guess they're probably somewhat at fault. Log in to reply |
Signal 822 and Canal wharf slot 21/07/2014 at 14:12 #62969 | |
Stephen Fulcher
![]() 2055 posts |
I have added your information to the bug report.
Log in to reply |
Signal 822 and Canal wharf slot 21/07/2014 at 17:25 #62984 | |
GeoffM
![]() 6344 posts ![]() |
Identified and fixed; update once I've rolled a few other things in.
SimSig Boss Log in to reply The following users said thank you: y10g9, slatteryc, leverpuller |
Signal 822 and Canal wharf slot 28/07/2014 at 09:49 #63235 | |
flabberdacks
![]() 608 posts |
" said:Identified and fixed; update once I've rolled a few other things in.Hi Geoff Could this same problem affect routing from 822/1198 to the Euroterminal (after a slot is given)? I'm getting the same route locking message from both signals but can set a route out of the Euroterminal with no complaint Log in to reply |
Signal 822 and Canal wharf slot 28/07/2014 at 10:04 #63236 | |
y10g9
![]() 895 posts |
I believe it will yes since it is the set of points from the down relief to the branch which causes the problem.
Log in to reply |
Signal 822 and Canal wharf slot 30/07/2014 at 22:00 #63334 | |
TylerE
![]() 149 posts |
Any eta on when the updated sim will be released? Rather annoying as it isn't possible to play the supplied time table wtihout lots of cheating.
Log in to reply |
Signal 822 and Canal wharf slot 30/07/2014 at 22:24 #63335 | |
y10g9
![]() 895 posts |
" said:Any eta on when the updated sim will be released? Rather annoying as it isn't possible to play the supplied time table wtihout lots of cheating. As with any updates or new sims, it will be ready when it's ready. Once Geoff has fixed the problems iditified it will go to the up testers to check. As a work around for the moment, I have been routing trains for canal wharf into the euroterminal talking them past the last the signal (having abandoned or changed the tt to suit). This means that you have minimal disruption to the rest of the sim. Log in to reply |