Page 1 of 1
| Some questions/bugs/inconsistencies 04/08/2014 at 18:29 #63514 | |
peterb
452 posts |
Thanks for refreshing and updating this great sim. - Church Lane & Meaford crossings penalise you after they've been down for three minutes, Hademore is longer at six. Why the difference? Three minutes is not as long as other sims IIRC. - Why is it when a train has fully passed CH64 (but not the clearing point), so circuit RUR1 is shown as unoccupied on the Colwich panel, does the same circuit on the Brereton panel still show as occupied until the train has passed the clearing point of CH64? (This may however be standard AB regs for Brereton panel) - Rugeley Town reversal bug (already reported) - The annotation 'to Brereton Sidings' I believe is from old Stafford SimSig when the Brereton Panel was not simulated. The location of Brereton sidings however isn't otherwise specified on the panel at all so would it not be more logical to have 'to Rugeley Town/Hednesford'? - As I believe I already noted, is it more appropriate to rename the location 'Rugeley' to 'Rugeley Trent Valley' for differentiation/clarification - What does '*MS' at Rugeley TV p1 mean. - Is there any reason why the overlap of signal LD47 never drops? - On the vintage F2 view, moving the column boundaries has no effect (the default column width is always maintained). This can mean text in the 'Description' column for example is not wrapped. - I had a passing down train (no platform specified) from Stafford TV Jn through towards Norton Bridge report a wrong route when I tried to send it down the RMT platform. Why was this? - Also, in developer mode, a vast proportion of trains enter with one minute delay added. This is something which also occurs in Aston. Bug? From the wiki page: - Armitage Jn is not a mandatory location; Rugeley North Jn is. - 'Stone Junction' does not exist as a location - the manual should read 'Stone' - I'm also not convinced manual path codes are necessary. Last edited: 04/08/2014 at 19:25 by peterb Log in to reply The following user said thank you: Gwasanaethau |
| Some questions/bugs/inconsistencies 04/08/2014 at 19:47 #63515 | |
|
Hpotter
205 posts |
Hi, just a quick response in passing, but i shall endeavor to respond later on properly when I return.
Log in to reply |
| Some questions/bugs/inconsistencies 04/08/2014 at 21:43 #63523 | |
Gwasanaethau
509 posts |
Ah, yes. I noticed the RMT platform ‘wrong route’ a couple of weeks ago and completely forgot to report it myself. Thanks for highlighting it!
Log in to reply |
| Some questions/bugs/inconsistencies 09/08/2014 at 13:03 #63676 | |
|
Hpotter
205 posts |
* Church Lane and Meaford crossings are set for 3 mins, this has now been increased as had missed them. * Section working as per the box for the AB section. * Brereton Sidings is the name of the box being simulated (Brereton workstation). * #MS is Middle Siding * As for the overlap on LD47, which version of the simulation are you running? * F2 issue is a generic core code, might be worth trying on the latest loader? * The RMT Area is for freight trains only, this is location os needed for all trains that are required to use it. * Would seem like the WTT has saved the delay states, try unsing the 'cleanse wtt' option from the F4 menu? Hope that this helps, but as per the normal, please feel free to update / ask etc. Log in to reply |
| Some questions/bugs/inconsistencies 09/08/2014 at 14:33 #63679 | |
|
Albert
1315 posts |
" said:* The RMT Area is for freight trains only, this is location os needed for all trains that are required to use it. Would be useful if the RMT can be used as a loop for a goods train timetabled through Stafford without needing to edit the timetable. If I remember correctly freight also calls for wrong route if routed there. AJP in games Log in to reply |
| Some questions/bugs/inconsistencies 09/08/2014 at 14:44 #63680 | |
|
peterb
452 posts |
Thanks for your responses: * As for the overlap on LD47, which version of the simulation are you running? Sim v3 build 14. * F2 issue is a generic core code, might be worth trying on the latest loader? Loader v4.1.2. * The RMT Area is for freight trains only, this is location os needed for all trains that are required to use it. Just to clarify it was a freight train which I sent through on this line. Can these trains not use this line as an avoider without penalty? * Would seem like the WTT has saved the delay states, try unsing the 'cleanse wtt' option from the F4 menu? Frustratingly this facility isn't available on my F4. What's more is that this is in developer mode, I'd expect all trains to enter on time. Log in to reply |
| Some questions/bugs/inconsistencies 09/08/2014 at 16:56 #63685 | |
jc92
3685 posts |
" said:" said:and how about TT's written before the RMT was opened? surely its a valid diversionary route anyway.* The RMT Area is for freight trains only, this is location os needed for all trains that are required to use it. "We don't stop camborne wednesdays" Log in to reply |
| Some questions/bugs/inconsistencies 09/08/2014 at 17:23 #63687 | |
onlydjw
456 posts |
Or when Freightliner ran round coal trains in there? Last summer when I did an overnight there, 80% of the freight overnight ran through the RMT platform (due to planned possessions) - not one was booked anywhere other than Stafford. God bless, Daniel Wilson Last edited: 09/08/2014 at 17:23 by onlydjw Log in to reply |
| Some questions/bugs/inconsistencies 09/08/2014 at 20:02 #63699 | |
Peter Bennet
5402 posts |
" said:Thanks for your responses:Not if the delay has already been saved into the timetable, which is what I think Howard is saying. Peter I identify as half man half biscuit - crumbs! Last edited: 09/08/2014 at 20:03 by Peter Bennet Log in to reply |
| Some questions/bugs/inconsistencies 09/08/2014 at 20:31 #63702 | |
postal
5263 posts |
" said:" said:The Cleanse TT option is available on the Dev tab in the F4 window which I think only displays if your have a Tester licence or better for the sim. It would be nice if the option was available on one of the other 2 Tools tabs so I've put in on the Issue Tracker as Mantis 11352.Thanks for your responses:Not if the delay has already been saved into the timetable, which is what I think Howard is saying. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply The following users said thank you: sloppyjag, peterb |
| Some questions/bugs/inconsistencies 09/08/2014 at 20:50 #63706 | |
|
peterb
452 posts |
" said:Not if the delay has already been saved into the timetable, which is what I think Howard is saying.Yes, but this is not the behaviour being exhibited. Let me clarify: All trains in the timetable originally have 0 minutes delay. Despite this, some freight and pax trains are still entering with a one minute delay flag. This is always in developer mode with no delays etc set in F3, so not behaviour I would expect to see. As I said, I have witnessed this same behaviour on Aston. This is not a case of a timetable being saved repeatedly reinforcing delay flags. Since I need to save the timetable though, to remove delay flags I need to go through each train and reset them manually; since it is a loader sim I can't use convdata. Why don't I have the F4 option to cleanse a timetable? It would be incredibly helpful. Hopefully this enlightens you. I appreciate this isn't a Stafford-specific bug however I would appreciate an explanation please. e: Written while postal was also responding. Howard, please can you also tell us what you think re: "is it more appropriate to rename the location 'Rugeley' to 'Rugeley Trent Valley' for differentiation/clarification", unless I'm not reading carefully enough I can't see a response to this, thanks. Last edited: 09/08/2014 at 20:52 by peterb Log in to reply |
| Some questions/bugs/inconsistencies 28/09/2014 at 15:08 #64750 | |
|
ipswich
247 posts |
hi all whilst playing a private game of stafford this afternoon i rang stoke PSB asking for a block on the up main and i also rang Basford Hall Box for a block on the up fast both boxes acknowledged i had asked for a block but a train has since entered on panel at both locations on the lines i had requested screenshots posted so you can have a look mods please feel free to move to appropriate section if wrong area thanks Callum Post has attachments. Log in to view them. Log in to reply |
| Some questions/bugs/inconsistencies 19/12/2014 at 16:00 #66838 | |
|
paul87101
67 posts |
Hi, I am developing a number of TTs on WCML and West Mids but cannot release any of them as I do not have a "Cleanse" option on my F4 menu. Is this going to be corrected soon or would an admin be willing to cleanse a TT and return to me? Thanks Paul Log in to reply |
| Some questions/bugs/inconsistencies 19/12/2014 at 16:04 #66839 | |
|
Danny252
1461 posts |
Why do you want to cleanse them? Delays are no longer stored in TTs, and so as far as I'm aware, cleansing has not been necessary for years.
Last edited: 19/12/2014 at 16:05 by Danny252 Log in to reply |
| Some questions/bugs/inconsistencies 19/12/2014 at 16:19 #66840 | |
|
postal
5263 posts |
" said:Hi,Paul Further to Danny's note, this was recently discussed in this thread. Basically the TT now resets to Day Zero when the sim is loaded then the scenario selected adds in appropriate delays. If the sim has a "perfect" option, you should in theory get a clean TT by starting a session and immediately saving the TT. However, there is now no need for complicated housekeeping as any delays embedded in the TT are discounted whenever a sim is loaded. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply The following user said thank you: paul87101 |
| Some questions/bugs/inconsistencies 14/02/2015 at 15:29 #69189 | |
|
John
884 posts |
I'm running through my West Hampstead 2015 timetable, and every train from Wellingborough is entering a minute late. I have tried starting the timetable in easy mode and immediately saving it in order to get a 'clean' timetable, but they're still entering late. 
Log in to reply |
| Some questions/bugs/inconsistencies 14/02/2015 at 19:02 #69201 | |
|
postal
5263 posts |
" said:I'm running through my West Hampstead 2015 timetable, and every train from Wellingborough is entering a minute late.Previously reported here on the Forum and logged on the issue tracker as #12191. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Some questions/bugs/inconsistencies 14/02/2015 at 19:11 #69203 | |
|
Danny252
1461 posts |
" said:" said:That bug only refers to trains entering at 00:00 and 00:00H, which I don't think is what John is referring to.I'm running through my West Hampstead 2015 timetable, and every train from Wellingborough is entering a minute late.Previously reported here on the Forum and logged on the issue tracker as #12191. Log in to reply |
| Some questions/bugs/inconsistencies 14/02/2015 at 19:33 #69206 | |
|
postal
5263 posts |
" said:" said:Description of the bug reads:" said:That bug only refers to trains entering at 00:00 and 00:00H, which I don't think is what John is referring to.I'm running through my West Hampstead 2015 timetable, and every train from Wellingborough is entering a minute late.Previously reported here on the Forum and logged on the issue tracker as #12191. "As per http://www.SimSig.co.uk/index.php?option=com_kunena&view=topic&catid=57&id=38832&Itemid=0#66856 [^] It does seem that from time to time trains are erroneously having 1 minute delays added to the entry time." The further detail in the steps to reproduce refer to entries at the start of the TT but this is only a way for one of the core code developers to see what is happening. The actual description identifies the bug as generic. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Some questions/bugs/inconsistencies 14/02/2015 at 22:37 #69208 | |
|
peterb
452 posts |
It's interesting the tests Peter Bennet has done - but look at my post #11. I found that in Aston and Stafford at least, the issue of trains entering one minute late is present throughout a timetable, and is not exclusive to those entering specifically at 00:00. I'd like to have it looked at again, under the premise that the behaviour Peter has found and that which I have found are one and the same bug. Log in to reply |