Page 1 of 1
| coming back to this Censcot sim after a long interval 08/07/2015 at 15:28 #74022 | |
slatteryc
254 posts |
1. extreme frustration at lack of sim-wide TORR - yes I know its authentic. Doesn't stop it being frustrating ; main reason I left it last time ( same for NEScot - lovely sim but frustrated the bejeezus out of me ; could they not be released with the masochist option optional ? ) 2. Keep getting stuck at Larbert and Stirling "route not ready to release" when all routes around are fine , clearing point violations with nothing in the vicinity There is a manual; I've read it and still no wiser. I can just about keep up with VicCentp, VICSe and BNS at normal speed; why does this sim annoy ... Log in to reply |
| coming back to this Censcot sim after a long interval 08/07/2015 at 15:36 #74024 | |
KymriskaDraken
963 posts |
" said:With Absolute Block clearing points are more than just an overlap. Sometimes they need points to be set and locked in a specific position. I wrote a guide to the clearing points and it's available for download here. There is also a link to the file in the sim manual but it's not working. Kev Log in to reply |
| coming back to this Censcot sim after a long interval 08/07/2015 at 16:46 #74030 | |
Steamer
3984 posts |
" said:" said:Which routes are you setting here? In some cases (e.g. the route into the loop at Dunblane), the route can only be set when the train enters the track circuit on the approach to the signal. It's like the approach control you see in all simulations, the difference being that you can't set the route with the signal clearing later in semaphore areas, for obvious reasons.With Absolute Block clearing points are more than just an overlap. Sometimes they need points to be set and locked in a specific position. I wrote a guide to the clearing points and it's available for download here. There is also a link to the file in the sim manual but it's not working. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| coming back to this Censcot sim after a long interval 08/07/2015 at 20:13 #74040 | |
jc92
3685 posts 
|
" said:" said:Just to add aswell. you can't set a route TO a semaphore that has already been cleared, or not yet had its route cancelled after the passage of a train." said:Which routes are you setting here? In some cases (e.g. the route into the loop at Dunblane), the route can only be set when the train enters the track circuit on the approach to the signal. It's like the approach control you see in all simulations, the difference being that you can't set the route with the signal clearing later in semaphore areas, for obvious reasons.With Absolute Block clearing points are more than just an overlap. Sometimes they need points to be set and locked in a specific position. I wrote a guide to the clearing points and it's available for download here. There is also a link to the file in the sim manual but it's not working. "We don't stop camborne wednesdays" Log in to reply |
| coming back to this Censcot sim after a long interval 08/05/2016 at 10:45 #82202 | |
tynie123
234 posts |
I loaded Steamers timetable Central Scotland 2013 v1.1 but at 00.02 I have 5J65 5J69 Coming in at Gartsherrie to Gartcosh the times on these movements are arr Gartcosh 30.37 they just keep coming any help would be appreciated.
Log in to reply |
| coming back to this Censcot sim after a long interval 08/05/2016 at 11:31 #82204 | |
|
Steamer
3984 posts |
" said:I loaded Steamers timetable Central Scotland 2013 v1.1 but at 00.02 I have 5J65 5J69 Coming in at Gartsherrie to Gartcosh the times on these movements are arr Gartcosh 30.37 they just keep coming any help would be appreciated.It sounds like you haven't copied the .WTR file, which contains the timetable rules that prevent this happening. As well as copying the "CScot 2013 v1.1.WTT file, you also need to copy the "CScot 2013 v1.1.WTR" file. To check, open F4, and click on the rules tab. Are any rules listed there? "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| coming back to this Censcot sim after a long interval 08/05/2016 at 12:10 #82206 | |
|
tynie123
234 posts |
" said:" said:No rules listed mateI loaded Steamers timetable Central Scotland 2013 v1.1 but at 00.02 I have 5J65 5J69 Coming in at Gartsherrie to Gartcosh the times on these movements are arr Gartcosh 30.37 they just keep coming any help would be appreciated.It sounds like you haven't copied the .WTR file, which contains the timetable rules that prevent this happening. As well as copying the "CScot 2013 v1.1.WTT file, you also need to copy the "CScot 2013 v1.1.WTR" file. Log in to reply |
| coming back to this Censcot sim after a long interval 08/05/2016 at 12:50 #82208 | |
|
Steamer
3984 posts |
" said:In that case, as I said above, you need to copy the .WTR file from the folder you downloaded into your CScot folder. You just need to do exactly the same thing you did with the .WTT file. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| coming back to this Censcot sim after a long interval 08/05/2016 at 18:43 #82213 | |
|
LucasLCC
94 posts |
Personally I believe that updating the Scottish sims to Loader standard should be a priority. Given that they're paid sims, I expected that they would be one of the first to be updated to the modern standard, as opposed to the Railworks approach of releasing DLC and then letting them become outdated.
Log in to reply |
| coming back to this Censcot sim after a long interval 08/05/2016 at 19:09 #82215 | |
|
jc92
3685 posts
|
" said:Personally I believe that updating the Scottish sims to Loader standard should be a priority. Given that they're paid sims, I expected that they would be one of the first to be updated to the modern standard, as opposed to the Railworks approach of releasing DLC and then letting them become outdated.who says they aren't? I haven't seen peter release anything recently in preference to updating existing Sims. they could very well be a priority, but time contraints mean they haven't been completed yet. Peter has mentioned elsewhere that Edinburgh was WIP with a possible modern era as well. "We don't stop camborne wednesdays" Log in to reply The following user said thank you: tjfrancis |
| coming back to this Censcot sim after a long interval 08/05/2016 at 20:01 #82218 | |
Peter Bennet
5402 posts |
Someone is doing an up-to-date set of timetables, when I get these the Sims will be released (Not EDB yet or I suppose I could release as loader without the updates - that bit's done). Peter I identify as half man half biscuit - crumbs! Log in to reply |
| coming back to this Censcot sim after a long interval 09/05/2016 at 11:09 #82224 | |
Andrew G
552 posts |
" said:Someone is doing an up-to-date set of timetables, when I get these the Sims will be released (Not EDB yet or I suppose I could release as loader without the updates - that bit's done).I hosted Edinburgh recently and some of the clients did comment it would be nice to see a loader version as people are getting used to the richer functionality available in multi player sessions. On this basis I think quite a few in the community, including me, would be happy to see an interim release without the new layout. Log in to reply |