Page 3 of 4
New sim: Leeds City! 17/12/2015 at 20:05 #78867 | |
ozrail
197 posts |
It's ok fixed problem. Must have been an interruption during the download and only some of the files were loaded. Did a search for the files and found and deleted them. Then used Loader to start again. Thanks to everyone who gave advice.
Log in to reply |
New sim: Leeds City! 17/12/2015 at 21:48 #78874 | |
lama77
15 posts |
Just bought it, into the first hour and looks brilliant. Thanks a lot to the team! Log in to reply |
New sim: Leeds City! 17/12/2015 at 21:54 #78875 | |
Ray
211 posts |
At around 2.20 am, the train 4E84 is directed to go to Hunslet FHH. However, where exactly is the required destination for this train once it passes the ground frame ? The manual does not make it very clear. Is it assumed that all trains arriving at this point go to Middleton Railway ?
Log in to reply |
New sim: Leeds City! 17/12/2015 at 21:59 #78876 | |
headshot119
4869 posts |
" said:At around 2.20 am, the train 4E84 is directed to go to Hunslet FHH. However, where exactly is the required destination for this train once it passes the ground frame ? The manual does not make it very clear. Is it assumed that all trains arriving at this point go to Middleton Railway ?I don't think the guys at the Middleton would be too happy if you sent them a freight liner train! Looking at Quail I have a feeling it's supposed to go in there then run round and come back via reception 1 into Leeds freightliner terminal. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
New sim: Leeds City! 17/12/2015 at 22:07 #78877 | |
Ray
211 posts |
Thanks - I tried to request a slot at FRT Terminal, but the train was not scheduled to go there. So if Middleton is nothing to do with it, I can only think it must go to shunt line first and then reverse to DS2 ! Any suggestions ? Log in to reply |
New sim: Leeds City! 17/12/2015 at 22:50 #78879 | |
jc92
3649 posts |
" said:At around 2.20 am, the train 4E84 is directed to go to Hunslet FHH. However, where exactly is the required destination for this train once it passes the ground frame ? The manual does not make it very clear. Is it assumed that all trains arriving at this point go to Middleton Railway ?route it into DS1. "We don't stop camborne wednesdays" Log in to reply The following user said thank you: sunocske |
New sim: Leeds City! 18/12/2015 at 15:51 #78896 | |
Splodge
710 posts |
Another minor bug (which has taken me a bit to pin down) - but some trains skip Armley Jct. Thus the TT doesn't step and the train calls up at the buffer stops or a red signal in Leeds thinking it is still at Armley. This seems to be when a train is routed on a different line to booked - mostly when routed via the A/B lines when booked on C/D (and thus it seems the train doesn't see the Whitehall Jct location - which may be prototypical?).
There's the right way, the wrong way and the railway. Log in to reply |
New sim: Leeds City! 18/12/2015 at 16:03 #78897 | |
Splodge
710 posts |
And another minor one - 2C68 to Horsforth doesn't drop off the system at Horsforth; it simply stops and terminates which blocks the line. And it took me about an hour to notice as it's not displayed on the panel.
There's the right way, the wrong way and the railway. Log in to reply |
New sim: Leeds City! 18/12/2015 at 16:31 #78900 | |
GeoffM
6344 posts |
" said:Another minor bug (which has taken me a bit to pin down) - but some trains skip Armley Jct. Thus the TT doesn't step and the train calls up at the buffer stops or a red signal in Leeds thinking it is still at Armley. This seems to be when a train is routed on a different line to booked - mostly when routed via the A/B lines when booked on C/D (and thus it seems the train doesn't see the Whitehall Jct location - which may be prototypical?).Thanks - fixed, will be released soon. Yes, Whitehall Junction isn't on the A/B lines strictly speaking but I've amended the sim so it registers passing. SimSig Boss Log in to reply |
New sim: Leeds City! 18/12/2015 at 16:51 #78905 | |
Class 92
359 posts |
When using the whole of platform 12 the overlap of the route from 3682 to 3652 doesn't drop out. I think there may be a bug with ARS at platform 11 as a train booked for P11A/B is routed to A/B correctly but then gets routed onto C/D despite not being booked for that platform. Log in to reply |
New sim: Leeds City! 18/12/2015 at 17:29 #78908 | |
jc92
3649 posts |
" said:When using the whole of platform 12 the overlap of the route from 3682 to 3652 doesn't drop out.The issue with P12 is on mantis. I have also raised it for the same issue in P11. Regards the trains terminating at horsforth this is becauss it isnt an exit location. Trains havs to run to harrogate. It will make current timetables awkward as there is a regular terminating service at horsforth. "We don't stop camborne wednesdays" Log in to reply |
New sim: Leeds City! 18/12/2015 at 17:54 #78912 | |
GeoffM
6344 posts |
" said:" said:I meant to say earlier that I fixed that too, no timetable changes required.When using the whole of platform 12 the overlap of the route from 3682 to 3652 doesn't drop out.The issue with P12 is on mantis. I have also raised it for the same issue in P11. SimSig Boss Log in to reply |
New sim: Leeds City! 18/12/2015 at 18:05 #78913 | |
Splodge
710 posts |
2H65 (1848 Skipton-Leeds) arrives into Leeds and becomes 2V10 (0735 Leeds-Ilkley) and immediately calls for TRTS - is that supposed to be an overnight berth? It's also exactly 2 minutes behind 2V60, 1933 Leeds-Ilkley so can't be a 24 hour timetable confusion issue.
There's the right way, the wrong way and the railway. Last edited: 18/12/2015 at 18:06 by Splodge Log in to reply |
New sim: Leeds City! 19/12/2015 at 00:12 #78940 | |
Class 92
359 posts |
" said:Another minor bug (which has taken me a bit to pin down) - but some trains skip Armley Jct. Thus the TT doesn't step and the train calls up at the buffer stops or a red signal in Leeds thinking it is still at Armley. This seems to be when a train is routed on a different line to booked - mostly when routed via the A/B lines when booked on C/D (and thus it seems the train doesn't see the Whitehall Jct location - which may be prototypical?).The same issue occurs if a train from Wakefield is diverted onto 'DH' line. Log in to reply |
New sim: Leeds City! 19/12/2015 at 12:51 #78966 | |
John 23
173 posts |
" said:" said:If I do that, it just sits there. What happens next? There's no suggestion that it uncouples to R/R, nor that its movements are over for the timetable.At around 2.20 am, the train 4E84 is directed to go to Hunslet FHH. However, where exactly is the required destination for this train once it passes the ground frame ? The manual does not make it very clear. Is it assumed that all trains arriving at this point go to Middleton Railway ?route it into DS1. Ah! The penny drops. Last edited: 19/12/2015 at 13:20 by John 23 Log in to reply |
New sim: Leeds City! 19/12/2015 at 13:16 #78971 | |
Ben86
126 posts |
Thanks to all involved in the development of Leeds- I'd thought for a while that this would make for a very interesting sim. I have created a platform lengths diagram to help me overcome the inevitable platforming challenges! I have added this to the Reference section on the wiki in case others would find it useful. Log in to reply The following user said thank you: Jan |
New sim: Leeds City! 19/12/2015 at 13:47 #78973 | |
NCC1701
129 posts |
:xmas I go away for a few days and Santa delivers my old stomping ground down the SimSig chimney! Many thanks to all involved in its creation. :xmas
Signalman Exeter West & Llangollen Log in to reply |
New sim: Leeds City! 19/12/2015 at 16:18 #78986 | |
jc92
3649 posts |
Couple of issues which I'll mention on here before Mantis in case they are intentional. at Church Fenton, ARS routes trains from Milford, with line code LSL, onto the down Normanton. is this correct? the new notes button is greyed out when in Server Mode if no notes are present, but if you Join as a Client it remains black and clickable even when no notes are present. I'm also finding ARS is setting Certain routes out of leeds station 2 mins before booked departure as opposed to waiting for TRTS, whilst others wait for TRTS "We don't stop camborne wednesdays" Last edited: 19/12/2015 at 16:34 by jc92 Log in to reply |
New sim: Leeds City! 19/12/2015 at 16:38 #78989 | |
Class 92
359 posts |
I just got an internal error happen as shown in the screenshot. EDIT - I have included a snapshot save and also a manual save before the error. Post has attachments. Log in to view them. Last edited: 19/12/2015 at 16:45 by Class 92 Log in to reply |
New sim: Leeds City! 19/12/2015 at 17:26 #78991 | |
Class 92
359 posts |
Another thing but 2H65 booked into Leeds at 19:28 seems to form 2V10 which is booked to depart at 07:35? I believe it's meant to berth a Leeds. EDIT - Signal 801 has failed so signal 799 is held at red but when a train comes to stop at it the TD still steps to 801 despite the train being stopped at the signal. This also causes it to overwrite the TD for signal 801 if there is already a train waiting. Last edited: 19/12/2015 at 18:17 by Class 92 Log in to reply |
New sim: Leeds City! 19/12/2015 at 21:25 #79000 | |
Essexgirl
42 posts |
If anyone wants any real life answers for this sim I work in York IECC, and will endeavour to answer any queries, and offer my help to any developers who are doing any of the other workstations within the IECC.
Log in to reply The following user said thank you: GeoffM |
New sim: Leeds City! 20/12/2015 at 00:18 #79006 | |
Class 92
359 posts |
I have now got another error whilst trying to save the sim. It has gone past 23:59:59 and the times have wrapped as they should be I can no longer save.
Post has attachments. Log in to view them. Log in to reply |
New sim: Leeds City! 23/12/2015 at 19:04 #79142 | |
GeoffM
6344 posts |
" said:at Church Fenton, ARS routes trains from Milford, with line code LSL, onto the down Normanton. is this correct?The relevant issue is the platform at Church Fenton. If it's "2" then there is no choice beyond so LSL is invalid (but ARS will route it anyway as there is no other choice). Are you sure you're not seeing LSL at Colton South Jn (where they *can* get to the LSL)? " said: I'm also finding ARS is setting Certain routes out of leeds station 2 mins before booked departure as opposed to waiting for TRTS, whilst others wait for TRTSI think this is for reversals with no next train working. There's a Mantis ticket somewhere for that. Everybody else: I've read the issues and believe I've fixed the majority of them. Update to follow soon, though the timetable will be a little longer. SimSig Boss Log in to reply The following user said thank you: spfish |
New sim: Leeds City! 23/12/2015 at 19:14 #79143 | |
Class 92
359 posts |
" said:I've noticed that this is usually on the through line platforms and, I believe, it's only the class 1 services that get routed out but I'm not 100% sure on that last part. Last edited: 23/12/2015 at 19:15 by Class 92 Log in to reply |
New sim: Leeds City! 23/12/2015 at 22:35 #79146 | |
Phil-jmw
674 posts |
" said:" said:I ran 4E84 from the reception, through the shunt line and onto the main line. When he stopped at the first signal I manually reversed him into DS2+, along with another train which arrived earlier whose number I can't remember.At around 2.20 am, the train 4E84 is directed to go to Hunslet FHH. However, where exactly is the required destination for this train once it passes the ground frame ? The manual does not make it very clear. Is it assumed that all trains arriving at this point go to Middleton Railway ?route it into DS1. Phil. Log in to reply |