Page 1 of 1
Signal Platform 1 Brighton 11/05/2016 at 04:19 #82251 | |
jem771
![]() 102 posts |
Anyone have any idea what this signal's purpose is? Platform 1 Brighton Post has attachments. Log in to view them. Jezz Last edited: 11/05/2016 at 04:20 by jem771 Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 05:58 #82252 | |
Hugh Jampton
![]() 69 posts |
It looks like a banner repeater signal, to indicate the state of the platform starter. See http://www.railsigns.uk/photos/p_repsig1/p_repsig1.html
Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 06:01 #82253 | |
jem771
![]() 102 posts |
Not seen any banner repeaters like that before. looks mechanical. taking in to consideration that Brighton is under Three Bridges SC Jezz Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 06:33 #82254 | |
LMK
![]() 133 posts |
" said:Not seen any banner repeaters like that before.There are still a few mechanical banner repeaters on the area controlled by Victoria SC too. E.g. At London Victoria on the first few platforms ![]() Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 07:59 #82256 | |
kbarber
![]() 1723 posts |
" said:Not seen any banner repeaters like that before. I think you'll find it's actually a shunt signal mechanism as used by the Southern Railway and BR(S) in their colour light schemes, floodlit for night use, and with the disc changed for a black-on-white one so it can act as a banner repeater for a signal which is out of sight round the corner. Details of the mechanism here http://www.wbsframe.mste.co.uk/public/Shunt_signals.html on Mark Adlington's excellent 'L' frame website http://www.wbsframe.mste.co.uk/public/index.htm Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 08:08 #82257 | |
clive
![]() 2766 posts |
" said:Not seen any banner repeaters like that before.Even an electronic interlocking can control mechanical signals via an appropriate interface. Moving something like that is much the same as moving a set of points, after all. Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 09:57 #82262 | |
BarryM
![]() 2158 posts |
I noticed that this signal is not displayed in Brighton's sum! Barry Barry, Sydney, New South Wales, Australia Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 14:04 #82266 | |
jem771
![]() 102 posts |
Whats also odd is that it will be behind most train cabs. It can only be for releasing locos off the buffer stops – which must never happen these days
Jezz Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 14:08 #82267 | |
headshot119
![]() 4869 posts |
" said:I noticed that this signal is not displayed in Brighton's sum!Banner Repeaters aren't always drawn on the box diagram, or panel. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 14:58 #82268 | |
320322
![]() 86 posts |
" said:" said:Quite right , Take Motherwell Simsig! Platform 2 (Down Main) has a twin banner repeater with the lower banner for the Down Coatbridge. This is shown on the splash screen with the 318 EMU departing with the Footbridge over the platforms. It is however , not shown on the Sim area!I noticed that this signal is not displayed in Brighton's sum!Banner Repeaters aren't always drawn on the box diagram, or panel. Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 16:00 #82269 | |
GeoffM
![]() 6344 posts |
" said:I noticed that this signal is not displayed in Brighton's sum!Banner repeaters in bay platforms aren't proved lit (or in the correct position for mechanical banners like this) so it's not necessary to show them... " said: Quite right , Take Motherwell Simsig! Platform 2 (Down Main) has a twin banner repeater with the lower banner for the Down Coatbridge. This is shown on the splash screen with the 318 EMU departing with the Footbridge over the platforms. It is however , not shown on the Sim area!...whereas ones like this most definitely should be there. Reported as #15300. SimSig Boss Log in to reply The following user said thank you: BarryM |
Signal Platform 1 Brighton 11/05/2016 at 17:43 #82271 | |
madaboutrains
![]() 313 posts ![]() |
Here is the banner repeater at Motherwell.![]() Post has attachments. Log in to view them. RIP Feltham Panel 1 Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 17:45 #82272 | |
madaboutrains
![]() 313 posts ![]() |
There are 3 banner repeaters indicated on the panel for Three Bridges. Note incorrect numbering ![]() Post has attachments. Log in to view them. RIP Feltham Panel 1 Last edited: 11/05/2016 at 17:45 by madaboutrains Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 18:13 #82273 | |
jc92
![]() 3649 posts |
Drawn. Not indicated. Theres no indication of aspect there I can see. Motherwell does have an indication. "We don't stop camborne wednesdays" Last edited: 11/05/2016 at 18:14 by jc92 Log in to reply |
Signal Platform 1 Brighton 11/05/2016 at 18:44 #82274 | |
LMK
![]() 133 posts |
" said:Whats also odd is that it will be behind most train cabs. It can only be for releasing locos off the buffer stops – which must never happen these days Platform 1 is Mainly used by Coastway services which are normally ran by 3 car class 313's so maybe it's for the drivers of those trains. Leon Last edited: 11/05/2016 at 18:45 by LMK Log in to reply |
Signal Platform 1 Brighton 12/05/2016 at 14:06 #82291 | |
Hooverman
![]() 306 posts |
When Brighton was resignalled we still had 2haps on the Coastway and loco hauled parcel/paper trains plus the inter regional down to Plymouth. At least one if not all of the BRs are detected as T663 won't clear if they fail to show an off thus trains need to be flagged out of platform 1. Log in to reply |
Signal Platform 1 Brighton 12/05/2016 at 17:41 #82297 | |
GeoffM
![]() 6344 posts |
" said:When Brighton was resignalled we still had 2haps on the Coastway and loco hauled parcel/paper trains plus the inter regional down to Plymouth.That's odd. It would seem that the banner could show off/proceed while the signal is at red for that to happen. Normally the signal has to be off before a banner approaching it can then show off! SimSig Boss Log in to reply |