Route Setting

You are here: Home > Forum > Simulations > Released > East Coastway > Route Setting

Page 1 of 1

Route Setting 13/12/2016 at 22:15 #90865
Jezzabusdriver
Avatar
75 posts
So just brought this now and have set the route for 5F32 from Lewes towards Newhaven, however I notice after the train has gone over the sections of track you need to set the section of track is still lit up in white and you have to manually cancel the route, is this how its meant to be rather than the route cancelling when the train has gone over it?

Thank you

Log in to reply
Route Setting 13/12/2016 at 22:19 #90866
Sacro
Avatar
1171 posts
Jezzabusdriver in post 90865 said:
So just brought this now and have set the route for 5F32 from Lewes towards Newhaven, however I notice after the train has gone over the sections of track you need to set the section of track is still lit up in white and you have to manually cancel the route, is this how its meant to be rather than the route cancelling when the train has gone over it?

Thank you
Yes, there's probably a TORR (train operated route release) option on startup that will allow you to make it easier.

Log in to reply
The following user said thank you: Jezzabusdriver
Route Setting 13/12/2016 at 23:06 #90868
Steamer
Avatar
3999 posts
TORR is only provided on Eastbourne panel, (probably) because this is the only box that was provided with it in real life. Lewes wasn't, and all the other boxes are lever frames, which obviously require the signaller to 'cancel' the route by putting the lever back.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q)
Last edited: 13/12/2016 at 23:06 by Steamer
Reason: .

Log in to reply
Route Setting 14/12/2016 at 19:01 #90881
DriverCurran
Avatar
695 posts
Steamer is correct, the only signals in the sim that will cancel the route off are LW92, LW93 (at Cooksbridge) and all main signals at Eastbourne. The updated version (awaiting release) will also remove the current incorrect method of working for the signals at Hampden Park and Wallsend crossings.

Paul

You have to get a red before you can get any other colour
Log in to reply
Route Setting 14/12/2016 at 22:29 #90883
GW43125
Avatar
495 posts
DriverCurran in post 90881 said:
Steamer is correct, the only signals in the sim that will cancel the route off are LW92, LW93 (at Cooksbridge) and all main signals at Eastbourne. The updated version (awaiting release) will also remove the current incorrect method of working for the signals at Hampden Park and Wallsend crossings.

Paul
Could you possibly elaborate on this "incorrect" method please?

Log in to reply
Route Setting 15/12/2016 at 11:22 #90892
DriverCurran
Avatar
695 posts
The protecting signals for Wallsend will TORR (with clickable replace lever roundels) and Mountfield Road level crossing at Hampden Park will autoraise if the route is manually reset quick enough.

Both these situations are lever frames and a way of getting the crossings to autoraise with routes proved as used but still set over them has been worked out, so both the above features have been removed on my local version of the sim.

Paul

You have to get a red before you can get any other colour
Log in to reply